New and extra-large traffic display, for installation in 80mm panel cutouts.
The AIR Traffic Display series is a high sophisticated display system for air traffic data. The hardware is very robust; the display is perfectly readable even in bright sunlight and provides many features to assist pilots in collision avoidance.
The new AIR Traffic Displays where developed from scratch with the entire manufacturers experience and the results of current research. The ultimate goal is to assist the pilot in collision avoidance in the best possible way. Therefore the displays offer more traffic overview, simple to use interface and better readability. Both FLARM®, and ADS-B and transponder data can be displayed.
The unit works directly with AIR Traffic, TRX devices, FLARM® devices, PowerFLARM® devices, LX-FLARM, and many other devices without any additional configurations. In additiona a connection with GARMIN® GDL90 and GARMIN® TIS® compatible collision warning systems and traffic receivers is also possible.
With the optional mounting bracket, the AIR Traffic Display 80 can be directly attached to an AIR Traffic (AT-1) and installed as one unit. The AIR Traffic Display is covered by the Minor Change Approvals and EASA Standard Changes for common FLARM® systems and may therefore be installed in a wide range of aircraft.
Features:
- Display of 3D Traffic, e.g. FLARM® or ADS-B and 2D traffic e.g. Transponders (depends on connected traffic system)
- Brilliant, sunlight readable display, extra-large with 2.7" screen diameter
- Optical and aural traffic warnings (alert sounder integrated)
- Optical and aural obstacle warnings (alert sounder integrated, depends on connected traffic system)
- Target identification via FLARMNet Database. Updateable via microSD Card
- Tactical functions for glider pilots (circling detection, climb-rate-filter)
- Tracking of targets out of reception range
- Software updates via microSD Card
Technical specifications:
- Dimensions (without rotary knob): 83 x 83 x 26 mm
- easy-to-install into 80mm standard cutout.
- Input Voltage: 9 to 32V DC
- Interfaces: RS232 FLARM Protocol and RS232 GARMIN TIS
Delivery:
- ATD-80 main unit
- Panel screws
- Standard RJ45 cable (FLARM/IGC compatible pinout)
- Documentation
Tel: +49 (0) 621 700 189 0
E-Mail: info@friebe.aero
Mo. - Fr. 8:30 - 17:00