Wing Walk Compound is a special grit mixed into a tough black enamel material. Used to form non-slip surfaces on airplane wing walks or any areas where a gritty, non-skid walkway is desired.
May be applied over a variety of surfaces, epoxy-primed metal, wood, fabric on wood or composites. Insure that the surface is clean and free from contaminates before application. If applying over old wing walk areas, remove loose or flaking old wing walk compound. Apply with a brush, mixing compound often to insure that the grit is suspended uniformly. Apply multiple coats until the desired non-skid surface is achieved.
Colour black.
1 US-Quart (0,946 l).
P/N: X-1567
Tel: +49 (0) 621 700 189 0
E-Mail: info@friebe.aero
Mo. - Fr. 8:30 - 17:00
