Sonstige Motoröle

Spezialentwicklung aus dem Hause LIQUI MOLY für 4 Takt Luftfahrzeugmotoren. LIQUI MOLY empfiehlt dieses Produkt für ROTAX-Motoren der Serien 912 und 914 und übertrifft die ROTAX Service-Instructions SI-912-016R5 und SI-914-019R5.Eigenschaften:sorgt für optimale Schmierung unter allen Betriebsbedingungensorgt für hohe Scher- und AlterungsstabilitätDie besondere Formel von AERO 4T 15W-50 bringt durch speziell abgestimmte Additive in durchgeführten Flugtests einen bis zu 10 Grad Celsius kühleren Motorlauf!sorgt für hohen Verschleiß- und Korrosionsschutzist geeignet für Rutschkupplungsorgt für optimale Motorsauberkeitsorgt für schnelle Durchölung beim KaltstartInhalt: 1 Liter

Victory® AW 20W-50 Aviation Oil Inhalt: 12 x 1 QuartAshless Dispersant, Multi-grade Engine Oil With Antiwear Additive For Aircraft Piston EnginesPhillips 66® Victory AW 20W-50 Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. Victory AW 20W-50 is pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (non-dispersant) mineral oils.Victory AW 20W-50 Aviation Oil is recommended for use in opposed piston engines. It can replace Commercial Grade 65, 80 or 100 single-grade engine oils with no sacrifice in performance. Victory AW 20W-50 Oil meets the requirements of: Avco Lycoming Service Instruction 1014 Pratt & Whitney Service Bulletin No. 1183 Rev. U SAE Standard J1899 Teledyne Continental Material Specification MHS-24B U.S. Military Specification MIL-L-22851D (obsolete) for additive treatmentFeatures/Benefits Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine Pre-blended with Lycoming-approved antiwear additive Easier starting and faster oil circulation at low temperatures compared with single-grade oils Reduced warm-up time and cooler operating temperatures compared with single-grade oils High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures Protects against rust and corrosion Reduces oil consumption in most engines Suitable for year-round use

X/C 20W-50 Aviation OilInhalt: 1 QuartAshless Dispersant, Multi-Grade Engine Oil for Aircraft Piston EnginesPhillips 66® X/C 20W-50 Aviation Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils.X/C 20W-50 Aviation Oil is recommended for use in opposed piston engines. It can replace Commercial Grade 65, 80 or 100 single-grade engine oils with no sacrifice in performance. It is recommended for use during break-in and then as the operational oil until TBO.X/C Aviation Oil meets the requirements of:Avco Lycoming Material Specification No. 301GPratt & Whitney Service Bulletin No. 1183 Rev. USAE Standard J1899Teledyne Continental Material Specification MHS-24BU.S. Military Specification MIL-L-22851D (obsolete) for additive treatment QPL Approval Numbers: D07L1-20W-50 (X/C 20W-50), X/C® Aviation OilFeatures/BenefitsAshless dispersant helps minimize engine sludge and varnish deposits for a cleaner engineEasier starting and faster oil circulation at low temperatures compared with single-grade oilsReduced warm-up time and cooler operating temperatures compared with single-grade oilsHigh film strength for protection against wear and piston scuffing, even under high-load conditions, such as take-off, and at elevated operating temperaturesProvides cleaner and quicker break-in than traditional all-mineral, non-additized, single-grade oilsProtects against rust and corrosionReduces oil consumption in most enginesSuitable for year-round use

X/C 20W-50 Aviation OilInhalt: 12 x 1 QuartAshless Dispersant, Multi-Grade Engine Oil for Aircraft Piston EnginesPhillips 66® X/C 20W-50 Aviation Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils.X/C 20W-50 Aviation Oil is recommended for use in opposed piston engines. It can replace Commercial Grade 65, 80 or 100 single-grade engine oils with no sacrifice in performance. It is recommended for use during break-in and then as the operational oil until TBO.X/C Aviation Oil meets the requirements of:Avco Lycoming Material Specification No. 301GPratt & Whitney Service Bulletin No. 1183 Rev. USAE Standard J1899Teledyne Continental Material Specification MHS-24BU.S. Military Specification MIL-L-22851D (obsolete) for additive treatment QPL Approval Numbers: D07L1-20W-50 (X/C 20W-50), X/C® Aviation OilFeatures/BenefitsAshless dispersant helps minimize engine sludge and varnish deposits for a cleaner engineEasier starting and faster oil circulation at low temperatures compared with single-grade oilsReduced warm-up time and cooler operating temperatures compared with single-grade oilsHigh film strength for protection against wear and piston scuffing, even under high-load conditions, such as take-off, and at elevated operating temperaturesProvides cleaner and quicker break-in than traditional all-mineral, non-additized, single-grade oilsProtects against rust and corrosionReduces oil consumption in most enginesSuitable for year-round use

Victory® AW 20W-50 Aviation Oil Inhalt: 1 QuartAshless Dispersant, Multi-grade Engine Oil With Antiwear Additive For Aircraft Piston EnginesPhillips 66® Victory AW 20W-50 Oil is an ashless dispersant, multi-grade engine oil specially formulated for year-round use in aircraft piston engines. Victory AW 20W-50 is pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It provides distinct performance benefits compared with single-grade engine oils, including easier starting and faster oil circulation at low temperatures, reduced warm-up time, and reduced oil consumption in most engines. It maintains its film strength under high loads and at high temperatures to protect against wear and piston scuffing. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (non-dispersant) mineral oils.Victory AW 20W-50 Aviation Oil is recommended for use in opposed piston engines. It can replace Commercial Grade 65, 80 or 100 single-grade engine oils with no sacrifice in performance. Victory AW 20W-50 Oil meets the requirements of: Avco Lycoming Service Instruction 1014 Pratt & Whitney Service Bulletin No. 1183 Rev. U SAE Standard J1899 Teledyne Continental Material Specification MHS-24B U.S. Military Specification MIL-L-22851D (obsolete) for additive treatmentFeatures/Benefits Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine Pre-blended with Lycoming-approved antiwear additive Easier starting and faster oil circulation at low temperatures compared with single-grade oils Reduced warm-up time and cooler operating temperatures compared with single-grade oils High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures Protects against rust and corrosion Reduces oil consumption in most engines Suitable for year-round use