Filter products
- Aviation Charts
- Headsets
- Avionics
- Pilot Training & books
- Pilot Equipment
- Aviation Equipment
- Airport Equipment
- Helmets
- SALE & Promotions
accessoires
Average rating of 0 out of 5 stars
For sewing polyester fabrics (Ceconite/Superflite).Roll of 200 m.
Average rating of 0 out of 5 stars
The sewing of covering fabrics and other fabrics, curved, lenght 100mm, diameter 1,3 mm, bag 5 pieces each.
Average rating of 0 out of 5 stars
A self-adhesive, durable, non-slip fabric for wing walks. Waterproof, weatherproof and unaffected by vibrations, heat, cold, gasoline or oil. Assures safe footing.The Safety-Walk tape from 3M consists of a slip-resistant mineral grain embedded in a tough, durable polymer and firmly bonded to a strong, dimensionally stable plastic film. The backing is coated with a pressure-sensitive rubber/resin-based adhesive protected by a peelable protective paper.Price per linear meter.
Average rating of 0 out of 5 stars
A self-adhesive, durable, non-slip fabric for wing walks. Waterproof, weatherproof and unaffected by vibrations, heat, cold, gasoline or oil. Assures safe footing.The Safety-Walk tape from 3M consists of a slip-resistant mineral grain embedded in a tough, durable polymer and firmly bonded to a strong, dimensionally stable plastic film. The backing is coated with a pressure-sensitive rubber/resin-based adhesive protected by a peelable protective paper.Price per linear meter.
Average rating of 0 out of 5 stars
Made of plastic, inner diameter 6 mm, outer diameter 19mm.Pack with 100 pieces
Average rating of 0 out of 5 stars
Wing Walk Compound is a special grit mixed into a tough black enamel material. Used to form non-slip surfaces on airplane wing walks or any areas where a gritty, non-skid walkway is desired.May be applied over a variety of surfaces, epoxy-primed metal, wood, fabric on wood or composites. Insure that the surface is clean and free from contaminates before application. If applying over old wing walk areas, remove loose or flaking old wing walk compound. Apply with a brush, mixing compound often to insure that the grit is suspended uniformly. Apply multiple coats until the desired non-skid surface is achieved.Colour black.1 US-Quart (0,946 l).P/N: X-1567