Filter products
Sennheiser Headsets
Average rating of 0 out of 5 stars
The Sennheiser HME 46-K is an exceptionally lightweight and comfortable passive aviation headset with standard GA dual plugs, specifically designed for use in cockpits with relatively low ambient noise levels. Weighing only approximately 150 g without the cable, it provides outstanding comfort and is particularly suitable for pilots who wear their headset for many hours at a time.Unlike conventional over-ear aviation headsets, the HME 46-K features an open, on-ear design. The ear pads rest lightly on the ears rather than completely surrounding them. This provides an airy and exceptionally lightweight wearing experience with minimal heat build-up.Due to its open design, the HME 46-K is particularly suitable for lower-noise cockpits. It is not designed as a replacement for a heavily insulated over-ear headset in very noisy piston-engine aircraft.The patented two-piece automatic headband provides excellent long-term comfort. It automatically adapts to the shape of the head and distributes the low contact pressure of approximately 3 N evenly. Combined with the soft ear pads, this ensures a comfortable fit even during extended periods of use.A special feature of the HME 46-K is its swivelling earphone system. One ear cup can be moved away from the ear for single-sided listening, allowing the pilot to hear direct cockpit communication while continuing to monitor radio or intercom audio.For clear and reliable voice transmission, the HME 46-K features the proven Sennheiser MKE 46 noise-compensated electret condenser microphone. The microphone is specifically designed for excellent speech intelligibility and helps reduce distracting ambient noise during transmission.The flexible microphone boom can be individually adjusted for precise positioning of the microphone in front of the mouth. The microphone can be worn on either the left or right side, allowing the headset to be adapted to the pilot's individual preference.Integrated Peak Level Protection protects the user against unpleasant volume peaks, increasing comfort in the event of sudden high audio levels.The headset operates entirely without active noise cancellation and requires no batteries, making it particularly simple and low-maintenance.The single-sided connection cable is approximately 1.85 m long and can be replaced if required. This HME 46-K version features the standard GA dual plugs commonly used in General Aviation aircraft, with a 6.3 mm headphone plug and a PJ-068-compatible microphone plug.A carrying bag and microphone windscreen are also included.Features:Passive aviation headsetExceptionally lightweight designWeight only approx. 150 g without cableOpen, On-Ear designParticularly suitable for lower-noise cockpitsExcellent comfort even during extended periods of usePatented two-piece automatic headbandLow contact pressure of approx. 3 NSoft ear padsSwivelling earphone system for single-sided listeningMKE 46 noise-compensated electret condenser microphoneExcellent speech intelligibilityFlexible microphone boomMicrophone can be worn on the left or right sidePeak Level Protection against high volume peaksNo batteries requiredSingle-sided cable routingReplaceable connection cableCable length approx. 1.85 mStandard GA dual plugs6.3 mm headphone plugPJ-068-compatible microphone plugCarrying bag includedMicrophone windscreen includedTechnical Specifications:Model: Sennheiser HME 46-KSennheiser Article No.: 500470Sennheiser P/N: 046-55-999-0131Application: Aviation / lower-noise cockpitsNoise reduction: PassiveDesign: Open / On-Ear / Supra-AuralHeadphone transducer principle: DynamicNominal headphone impedance: 600 OhmsHeadphone frequency response: 20 – 14,000 HzSound pressure level: approx. 94 dB SPL according to RTCA/DO-214Total harmonic distortion: < 1% at 110 dB SPLContact pressure: approx. 3 NMicrophone: Sennheiser MKE 46Microphone transducer principle: Electret condenserMicrophone: Noise compensatedMicrophone frequency response: 350 – 6,000 HzMicrophone output voltage: typ. 400 mV ±3 dB at 114 dB SPLMicrophone supply voltage: 8 – 16 V DCHeadphone connector: 6.3 mm jack plugMicrophone connector: PJ-068 compatibleCable: Single-sided, replaceable connection cableCable length: approx. 1.85 mWeight without cable: approx. 150 gHeadset power supply: No battery requiredApplication Note:The Sennheiser HME 46-K features an open, On-Ear design and therefore does not provide the same level of passive noise attenuation as a closed, over-ear aviation headset. It is particularly suitable for cockpits with relatively low ambient noise levels where low weight and excellent long-term comfort are the primary requirements.Scope of Delivery:Sennheiser HME 46-K Aviation Headset with standard GA dual plugsMicrophone windscreenThe Sennheiser HME 46-K is particularly suitable for pilots looking for an exceptionally lightweight and comfortable headset for lower-noise cockpits. With a weight of only approximately 150 g, an open On-Ear design, MKE 46 electret microphone, swivelling earphone system and standard GA dual plugs, it combines excellent speech intelligibility, low weight and outstanding long-term comfort.
Average rating of 0 out of 5 stars
The Sennheiser HMEC 26 is an exceptionally lightweight and comfortable aviation headset with active NoiseGard™ noise compensation, designed for professional use in aircraft cockpits. It combines effective active noise reduction with low weight, excellent long-term comfort and clear voice transmission.This version is supplied without a connection cable. Thanks to its modular cable system, the HMEC 26 can be combined with various separately available connection cables, allowing it to be adapted to different aircraft connectors and power supply configurations.The integrated NoiseGard™ Active Noise Compensation reduces distracting ambient noise by up to 18 dB, particularly in the low-frequency range. This allows radio and intercom audio to be heard clearly at lower volume levels, helping to reduce acoustic fatigue during extended periods of use.NoiseGard™ can be switched off if required. The HMEC 26 can then continue to be used as a conventional passive aviation headset.The closed dynamic earphone systems rest on the ears and combine a compact design with effective passive noise attenuation. Weighing only approximately 210 g without the connection cable, the HMEC 26 is considerably lighter than many conventional over-ear ANR headsets, making it particularly comfortable for longer flights and professional operations.The patented two-piece automatic headband provides excellent long-term comfort. It automatically adapts to the shape of the head when the headset is put on. Soft ear pads and low contact pressure contribute to a comfortable fit even during extended periods of use.One earphone can be swivelled backwards for single-sided listening, allowing the pilot to hear direct conversations or ambient sounds without completely removing the headset.For clear and reliable voice transmission, the HMEC 26 features a noise-compensated condenser microphone. It is specifically designed to provide excellent speech intelligibility even in demanding cockpit environments.The flexible microphone boom allows precise positioning of the microphone in front of the mouth. Thanks to its swivelling design, the microphone can be worn on either the left or right side.Integrated Peak Level Protection protects the user's hearing against sudden volume peaks above 110 dB, providing additional comfort and protection during operation.The power supply for the NoiseGard™ electronics depends on the connection cable or power supply module being used. Depending on the configuration, NoiseGard™ can be powered by the aircraft electrical system or by batteries/rechargeable batteries. An Auto Shut-Off function helps extend battery life with appropriately equipped battery-powered configurations.The modular design offers an additional advantage: the connection cable can be easily replaced, allowing the headset to be adapted to different applications, aircraft and connector systems.Features:Active aviation headsetNoiseGard™ Active Noise CompensationUp to 18 dB active reduction of distracting ambient noiseNoiseGard™ can be switched offCan also be used as a conventional passive headsetClosed dynamic earphone systemsOn-Ear / Supra-Aural designExceptionally lightweight constructionWeight only approx. 210 g without connection cableExcellent comfort even during longer flightsPatented two-piece automatic headbandSoft ear padsSwivelling earphone system for single-sided listeningNoise-compensated condenser microphoneExcellent speech intelligibility even in demanding cockpit environmentsFlexible microphone boomMicrophone can be worn on the left or right sidePeak Level Protection against volume peaks above 110 dBModular connection cable systemConnection cable can be easily replacedNoiseGard™ power supply via aircraft electrical system or batteries/rechargeable batteries depending on cable configurationAuto Shut-Off with compatible battery-powered configurationsTechnical Specifications:Model: Sennheiser HMEC 26Application: Aviation / Aircraft CockpitNoise reduction: NoiseGard™ Active Noise Compensation + passive noise attenuationActive noise compensation: Up to 18 dBDesign: Closed / On-Ear / Supra-AuralHeadphone transducer principle: DynamicHeadphone frequency response: 20 – 14,000 HzImpedance: 600 Ohms Mono / 1,200 Ohms StereoMaximum sound pressure level: 120 dB SPL at 1 kHzTotal harmonic distortion: < 1% at 1 kHz / 95 dB SPLContact pressure: approx. 3.6 NMicrophone: Noise-compensated condenser microphoneMicrophone frequency response: 100 – 6,000 HzMicrophone supply voltage: 8 – 16 V DCWeight without connection cable: approx. 210 gConnection cable: Not includedNoiseGard™ power supply: Depending on the connection cable or power supply module usedOperating temperature: -15 °C to +55 °CImportant Connection Cable Information:This Sennheiser HMEC 26 is supplied without a connection cable. A compatible connection cable suitable for the aircraft and the required power supply configuration is necessary for operation.Thanks to the modular cable system, the headset can be combined with various compatible cable versions. Please select the appropriate connection cable separately according to the aircraft connector system and the required NoiseGard™ power supply.Scope of Delivery:Sennheiser HMEC 26 Aviation HeadsetCable clipMicrophone windscreenHeadset carrying caseConnection cable not included.The Sennheiser HMEC 26 is particularly suitable for pilots looking for a lightweight, comfortable and flexibly configurable active aviation headset. With a weight of only approximately 210 g, NoiseGard™ active noise compensation of up to 18 dB, a noise-compensated microphone and a modular connection cable system, it is well suited to professional cockpit applications and different aircraft configurations. The separately available connection cables allow the HMEC 26 to be specifically adapted to the required connector system and power supply.EASA Form 1 certificate not available
Average rating of 0 out of 5 stars
The Sennheiser HMEC 26-2-1-BV-K-2 is an exceptionally lightweight and comfortable aviation headset with active NoiseGard™ noise compensation, designed for professional cockpit applications as well as General Aviation. It combines effective active and passive noise reduction with low weight, excellent speech intelligibility and outstanding long-term comfort.This version is supplied as a complete, ready-to-use headset with standard GA dual plugs and an external battery compartment. Unlike the basic version supplied without a connection cable, the BV-K-2 version already includes the appropriate connection cable.The integrated NoiseGard™ Active Noise Compensation particularly reduces distracting low-frequency cockpit noise. In the frequency range from 100 to 300 Hz, the active noise compensation provides at least 18 dB of noise reduction. Combined with the passive attenuation of the headset, total active and passive noise attenuation is approximately 15 to 30 dB.By reducing distracting background noise, radio and intercom communications can be heard clearly at more comfortable volume levels. This helps reduce acoustic fatigue and contributes to a more comfortable working environment, particularly during longer flights.The HMEC 26-2-1 features closed, dynamic On-Ear earphone systems. Unlike conventional large Over-Ear aviation headsets, the ear pads rest directly on the ears. This keeps the headset exceptionally compact and lightweight.Weighing only approximately 210 g without the connection cable, the HMEC 26-2-1 is one of the lighter active aviation headsets and is particularly suitable for pilots who wear their headset for many hours at a time.Additional comfort is provided by the patented two-piece automatic headband. It automatically adapts to the shape of the head when the headset is put on and evenly distributes the low contact pressure of approximately 3.6 N.One earphone can be swivelled backwards for single-sided listening. This allows the pilot to hear direct conversations or ambient sounds when required without completely removing the headset.For clear and reliable voice transmission, the HMEC 26-2-1 features a high-quality noise-compensated, pre-polarized condenser microphone. It is specifically designed to provide excellent speech intelligibility in cockpit environments while reducing distracting background noise during transmission.The flexible microphone boom allows precise positioning of the microphone in front of the mouth. Thanks to its swivelling design, the microphone can be worn on either the left or right side.Integrated Peak Level Protection protects against unpleasant volume peaks. Audio peaks above 110 dB are limited, contributing to safer and more comfortable operation.This BV-K-2 version features an external battery compartment to power the NoiseGard™ electronics. Power is supplied by two 1.5 V AA batteries.The connection cable features independent volume controls for the left and right ear, allowing the listening level to be individually adjusted.The HMEC 26-2-1-BV-K-2 is supplied with the standard GA dual plugs commonly used in General Aviation and can therefore be connected directly to appropriately equipped aircraft intercom systems.Features:Active aviation headsetNoiseGard™ Active Noise CompensationAt least 18 dB active noise compensation in the 100 to 300 Hz frequency rangeTotal active and passive noise attenuation approx. 15 to 30 dBClosed dynamic earphone systemsOn-Ear / Supra-Aural designExceptionally lightweight constructionWeight only approx. 210 g without connection cableExcellent long-term comfortPatented two-piece automatic headbandLow contact pressure of approx. 3.6 NSwivelling earphone system for single-sided listeningNoise-compensated condenser microphoneExcellent speech intelligibilityFlexible microphone boomMicrophone can be worn on the left or right sidePeak Level Protection against volume peaks above 110 dBIndependent volume controls for left and right earExternal battery compartmentPower supply via 2 × AA batteriesStandard GA dual plugsComplete with connection cableHeadset carrying case includedTechnical Specifications:Model: Sennheiser HMEC 26-2-1-BV-K-2Sennheiser Article No.: 505675Application: Aviation / General Aviation / Professional Cockpit ApplicationsNoise reduction: NoiseGard™ Active Noise Compensation + passive noise attenuationActive noise compensation: ≥ 18 dB at 100 – 300 HzTotal active and passive noise attenuation: approx. 15 – 30 dBDesign: Closed / On-Ear / Supra-AuralHeadphone transducer principle: DynamicHeadphone frequency response: 20 – 14,000 HzHeadphone impedance with -2 cable: 350 Ohms Mono / 600 Ohms StereoSound pressure level with -2 cable: 95 dB SPL at 1 kHz / 1 mW, MonoMaximum sound pressure level: 120 dB SPL at 1 kHzTotal harmonic distortion: < 1% at 1 kHz / 95 dB SPLContact pressure: approx. 3.6 NMicrophone: Noise-compensated, pre-polarized condenser microphoneMicrophone boom: Flexible, can be worn on the left or right sidePeak Level Protection: Yes, limits volume peaks above 110 dBVolume control: Independent left and right ear controlsConnector: Standard GA dual plugsConnection cable: BV-K-2NoiseGard™ power supply: 2 × 1.5 V AA batteriesHeadset weight without connection cable: approx. 210 gScope of Delivery:Sennheiser HMEC 26-2-1-BV-K-2 Aviation HeadsetBV-K-2 connection cable with standard GA dual plugsExternal battery compartmentIndependent volume controls for left and right earHeadset carrying caseImportant Note: EASA Form 1 is not available for this product.The Sennheiser HMEC 26-2-1-BV-K-2 is particularly suitable for pilots looking for an exceptionally lightweight active aviation headset with standard GA connectivity and excellent long-term comfort. Weighing only approximately 210 g, it combines NoiseGard™ active noise compensation, a noise-compensated microphone, independent volume controls and battery-powered operation. With the BV-K-2 connection cable already included, this version is ready for use with appropriately equipped General Aviation aircraft.
Average rating of 0 out of 5 stars
The Sennheiser HME 110 ATC is a rugged passive aviation headset designed for professional Air Traffic Control (ATC) applications as well as General Aviation. Its closed, over-ear design combines effective passive noise attenuation with excellent speech intelligibility and comfortable long-term wear.The HME 110 ATC relies entirely on passive noise attenuation and therefore requires no batteries or external power supply for the headphones. The closed ear cups effectively reduce distracting ambient and cockpit noise and provide a Noise Reduction Rating (NRR) of 24 dB.Passive noise attenuation is frequency-dependent and ranges from more than 10 dB up to 40 dB. This makes the headset particularly suitable for applications where reliable communication and effective isolation from ambient noise are required.For clear and reliable voice transmission, the HME 110 ATC features the proven Sennheiser MKE 45-1 noise-compensated electret microphone. The unidirectional microphone reduces distracting ambient noise during transmission and helps provide excellent speech intelligibility for radio, intercom and ATC communications.The flexible microphone boom allows precise positioning of the microphone directly in front of the mouth. The microphone can be worn on either the left or right side, allowing the headset to be adapted to the user's individual preference.For a high level of comfort, the HME 110 ATC features extra-soft, circumaural ear pads and a padded headband. The closed over-ear design completely surrounds the ears and contributes significantly to the headset's passive noise attenuation.Weighing approximately 350 g without the cable, the HME 110 ATC combines rugged construction with comfortable wear for extended periods of use.The volume control located on the ear cup allows the listening volume to be adjusted quickly and easily.The headset can be switched between Mono and Stereo operation, providing additional flexibility when used with appropriately equipped audio and intercom systems.This version features an approximately 1.5 m connection cable with standard aviation dual plugs. The headphones are connected via a 6.35 mm jack plug, while the microphone uses a 5.25 mm / PJ-068-compatible plug.The Sennheiser HME 110 ATC comes with a 5-year manufacturer's warranty.Features:Passive aviation and ATC headsetSuitable for Air Traffic Control and General AviationClosed Around-the-Ear / Circumaural designNoise Reduction Rating (NRR): 24 dBPassive noise attenuation from more than 10 dB up to 40 dBNo batteries required for the headphonesHigh-quality dynamic transducersExcellent speech intelligibilityMKE 45-1 electret microphoneNoise-compensated, unidirectional microphoneFlexible microphone boomMicrophone can be worn on the left or right sideExtra-soft ear padsPadded headbandVolume control on the headsetSwitchable Mono/Stereo operationApprox. 1.5 m connection cableStandard aviation dual plugsWeight approx. 350 g without cable5-year manufacturer's warrantyTechnical Specifications:Model: Sennheiser HME 110 ATCSennheiser Article No.: 500679Application: ATC / General AviationNoise reduction: PassiveNoise Reduction Rating (NRR): 24 dBPassive noise attenuation: >10 to 40 dBDesign: Closed / Circumaural / Around-the-EarHeadphone transducer principle: DynamicHeadphone frequency response: 45 – 15,000 HzNominal impedance: 150 Ohms Mono / 300 Ohms StereoMaximum sound pressure level: 120 dB SPLTotal harmonic distortion: < 1% at 100 dB SPL / 1 kHzContact pressure: approx. 10 NMicrophone: Sennheiser MKE 45-1Microphone transducer principle: ElectretMicrophone characteristic: Noise-compensated / UnidirectionalMicrophone frequency response: 100 – 5,000 HzMicrophone supply voltage: 8 – 16 V DCRecommended microphone load impedance: 150 – 2,200 OhmsVolume control: YesMono/Stereo switch: YesHeadphone connector: 6.35 mm jack plugMicrophone connector: 5.25 mm jack plug / PJ-068 compatibleCable length: approx. 1.5 mWeight without cable: approx. 350 gOperating temperature: -10 °C to +55 °CStorage temperature: -55 °C to +70 °CManufacturer's warranty: 5 yearsScope of Delivery:Sennheiser HME 110 ATC HeadsetCable clipHeadset carrying case not included.The Sennheiser HME 110 ATC is an excellent choice for users looking for a rugged and reliable passive headset for ATC or General Aviation. The combination of 24 dB NRR, closed over-ear design, MKE 45-1 electret microphone, Mono/Stereo switching and standard aviation dual plugs provides excellent speech intelligibility and effective passive noise attenuation without batteries or active electronics.
Average rating of 0 out of 5 stars
The Sennheiser HME 110 ATC including headset bag is a rugged passive aviation headset designed for professional Air Traffic Control (ATC) applications as well as General Aviation. Its closed, over-ear design combines effective passive noise attenuation with excellent speech intelligibility and comfortable long-term wear.This version also includes a headset bag, providing convenient protection and storage for the headset during transport and when not in use.The HME 110 ATC relies entirely on passive noise attenuation and therefore requires no batteries or active electronics. The closed ear cups effectively reduce distracting ambient and cockpit noise and provide a Noise Reduction Rating (NRR) of 24 dB.Passive noise attenuation is frequency-dependent and ranges from more than 10 dB up to 40 dB. This makes the headset particularly suitable for applications where reliable communication and effective isolation from ambient noise are required.For clear and reliable voice transmission, the HME 110 ATC features the proven Sennheiser MKE 45-1 noise-compensated electret microphone. The unidirectional microphone reduces distracting ambient noise during transmission and helps provide excellent speech intelligibility for radio, intercom and ATC communications.The flexible microphone boom allows precise positioning of the microphone directly in front of the mouth. The microphone can be worn on either the left or right side, allowing the headset to be adapted to the user's individual preference.For a high level of comfort, the HME 110 ATC features extra-soft, circumaural ear pads and a padded headband. The closed over-ear design completely surrounds the ears and contributes significantly to the headset's passive noise attenuation.Weighing approximately 350 g without the cable, the HME 110 ATC combines rugged construction with comfortable wear even during extended periods of use.The volume control located on the ear cup allows the listening volume to be adjusted quickly and easily.The headset can be switched between Mono and Stereo operation, providing additional flexibility when used with appropriately equipped audio and intercom systems.This version features an approximately 1.5 m connection cable with standard aviation dual plugs. The headphones are connected via a 6.35 mm jack plug, while the microphone uses a 5.25 mm jack plug.The Sennheiser HME 110 ATC comes with a 5-year manufacturer's warranty.Features:Passive aviation and ATC headsetSuitable for Air Traffic Control and General AviationClosed Around-the-Ear / Circumaural designNoise Reduction Rating (NRR): 24 dBPassive noise attenuation from more than 10 dB up to 40 dBNo batteries requiredHigh-quality dynamic transducersExcellent speech intelligibilityMKE 45-1 electret microphoneNoise-compensated, unidirectional microphoneFlexible microphone boomMicrophone can be worn on the left or right sideExtra-soft ear padsPadded headbandVolume control on the headsetSwitchable Mono/Stereo operationApprox. 1.5 m connection cableStandard aviation dual plugsWeight approx. 350 g without cable5-year manufacturer's warrantyHeadset bag includedTechnical Specifications:Model: Sennheiser HME 110 ATCSennheiser Article No.: 500679Application: ATC / General AviationNoise reduction: PassiveNoise Reduction Rating (NRR): 24 dBPassive noise attenuation: >10 to 40 dBDesign: Closed / Circumaural / Around-the-EarHeadphone transducer principle: DynamicHeadphone frequency response: 45 – 15,000 HzNominal impedance: 150 Ohms Mono / 300 Ohms StereoMaximum sound pressure level: 120 dB SPLTotal harmonic distortion: < 1% at 100 dB SPL / 1 kHzContact pressure: approx. 10 NMicrophone: Sennheiser MKE 45-1Microphone transducer principle: ElectretMicrophone characteristic: Noise-compensated / UnidirectionalMicrophone frequency response: 100 – 5,000 HzMicrophone supply voltage: 8 – 16 V DCRecommended microphone load impedance: 150 – 2,200 OhmsVolume control: YesMono/Stereo switch: YesHeadphone connector: 6.35 mm jack plugMicrophone connector: 5.25 mm jack plugCable length: approx. 1.5 mWeight without cable: approx. 350 gOperating temperature: -10 °C to +55 °CStorage temperature: -55 °C to +70 °CManufacturer's warranty: 5 yearsScope of Delivery:Sennheiser HME 110 ATC Aviation HeadsetCable clipHeadset bagThe Sennheiser HME 110 ATC including headset bag is an excellent choice for users looking for a rugged and reliable passive headset for ATC or General Aviation. The combination of 24 dB NRR, closed over-ear design, MKE 45-1 electret microphone, Mono/Stereo switching and standard aviation dual plugs provides excellent speech intelligibility and effective passive noise attenuation without batteries or active electronics. The included headset bag also provides convenient protection for storage and transport.
Average rating of 0 out of 5 stars
The Sennheiser HME 110 C3 is a rugged passive aviation and communication headset featuring open cable ends for custom connector installation. Based on the proven HME 110 series, it combines a closed over-ear design with effective passive noise attenuation, excellent speech intelligibility and comfortable long-term wear.Unlike the HME 110 ATC with pre-installed standard aviation plugs, the HME 110 C3 is supplied without connectors. The approximately 1.85 m connection cable features open, pre-tinned cable ends, allowing suitable connectors to be installed according to the specific application or enabling integration into customized communication systems.The HME 110 C3 relies entirely on passive noise attenuation and requires no batteries or active electronics. The closed ear cups effectively reduce distracting ambient and cockpit noise.Passive noise attenuation is frequency-dependent and ranges from more than 10 dB up to 40 dB. This makes the headset particularly suitable for applications where reliable communication and effective isolation from ambient noise are required.For clear and reliable voice transmission, the HME 110 C3 features the proven MKE 45-1 noise-compensated electret microphone. The unidirectional microphone reduces distracting ambient noise during transmission and helps provide excellent speech intelligibility.The flexible microphone boom allows precise positioning of the microphone directly in front of the mouth. The microphone can be worn on either the left or right side, allowing the headset to be adapted to the user's individual preference.For a high level of comfort, the HME 110 C3 features extra-soft, circumaural ear pads and a padded headband. The closed over-ear design completely surrounds the ears and contributes significantly to the headset's passive noise attenuation.Weighing approximately 350 g without the cable, the HME 110 C3 combines rugged construction with comfortable wear even during extended periods of use.The volume control located on the ear cup allows the listening volume to be adjusted quickly and easily.The headset can be switched between Mono and Stereo operation, providing additional flexibility for integration with different communication and audio systems.The Sennheiser HME 110 C3 comes with a 5-year manufacturer's warranty.Features:Passive aviation and communication headsetClosed Around-the-Ear / Circumaural designPassive noise attenuation from more than 10 dB up to 40 dBNo batteries requiredHigh-quality dynamic transducersExcellent speech intelligibilityMKE 45-1 electret microphoneNoise-compensated, unidirectional microphoneFlexible microphone boomMicrophone can be worn on the left or right sideExtra-soft ear padsPadded headbandVolume control on the headsetSwitchable Mono/Stereo operationApprox. 1.85 m connection cableOpen, pre-tinned cable endsNo connectors installedSuitable for custom connector installationWeight approx. 350 g without cable5-year manufacturer's warrantyTechnical Specifications:Model: Sennheiser HME 110 C3Sennheiser Article No.: 507280Application: Aviation / ATC / Custom Communication SystemsNoise reduction: PassivePassive noise attenuation: >10 to 40 dBDesign: Closed / Circumaural / Around-the-EarHeadphone transducer principle: DynamicHeadphone frequency response: 45 – 15,000 HzNominal impedance: 150 Ohms Mono / 300 Ohms StereoMaximum sound pressure level: 120 dB SPLTotal harmonic distortion: < 1%Nominal power handling: 200 mWContact pressure: approx. 10 NMicrophone: MKE 45-1 electret microphoneMicrophone characteristic: Noise-compensated / UnidirectionalMicrophone frequency response: 100 – 5,000 HzMicrophone output voltage: 40 mV/Pa ±1 dB at 1 kHzMicrophone supply voltage: 8 – 16 V DCRecommended microphone load impedance: 150 – 2,200 OhmsVolume control: YesMono/Stereo switch: YesConnection: Open, pre-tinned cable endsCable length: approx. 1.85 mWeight without cable: approx. 350 gOperating temperature: -10 °C to +55 °CStorage temperature: -55 °C to +70 °CManufacturer's warranty: 5 yearsImportant Connection Information:The Sennheiser HME 110 C3 is supplied without installed connectors. The approximately 1.85 m cable terminates in open, pre-tinned wires and is intended for custom connector installation.Before installing a connector or connecting the headset to a communication system, the pin assignment, impedance and electrical requirements of the respective system must be verified.Scope of Delivery:Sennheiser HME 110 C3 HeadsetConnection cable with open, pre-tinned cable endsCable clipConnector plugs are not included.The Sennheiser HME 110 C3 is particularly suitable for professional users and installations requiring a reliable passive headset with a custom-configurable connection. The combination of a closed over-ear design, effective passive noise attenuation, MKE 45-1 electret microphone and 1.85 m cable with open ends allows flexible integration into a wide range of aviation and communication systems.
Average rating of 0 out of 5 stars
The EPOS COMMAND HME 130 is a rugged passive aviation headset designed for pilots who require effective passive noise attenuation, clear voice transmission and reliable operation without batteries or active electronics. Its closed, over-ear design makes it particularly suitable for General Aviation and demanding high-noise cockpit environments.The HME 130 is part of the professional EPOS COMMAND series and combines rugged construction with advanced speaker and microphone technology. Particular emphasis has been placed on clear speech transmission and reproduction as well as effective isolation from distracting ambient noise.The closed, circumaural ear cups provide passive noise attenuation of up to 40 dB at 1 kHz. This effectively reduces distracting cockpit and ambient noise without requiring active noise cancellation or an additional power supply.Especially in noisy cockpit environments, the high level of passive noise attenuation helps improve the intelligibility of radio and intercom communications while reducing acoustic fatigue during flight.For clear and reliable voice transmission, the COMMAND HME 130 features a noise-compensated bidirectional electret microphone. In combination with EPOS Voice™ technology, the microphone system is designed to provide precise speech pickup and excellent intelligibility even in environments with high background noise.The flexible 21 cm microphone boom allows precise positioning of the microphone directly in front of the mouth. The boom can be swivelled, allowing the microphone to be worn on either the left or right side.The large, closed ear cups are equipped with soft leatherette ear pads. The circumaural design completely surrounds the ears, providing a consistent seal and contributing significantly to the headset's high passive noise attenuation.The adjustable, padded headband allows the headset to be individually adapted to the user and, together with the soft ear pads, provides a secure and comfortable fit.The high-quality dynamic speakers feature a frequency response of 60 to 17,000 Hz and an impedance of 300 Ohms. This provides clear and precise reproduction of speech and audio signals.The integrated volume control on the ear cup allows the listening level to be adjusted quickly and easily.The headset operates entirely passively and requires no batteries or separate power supply, making it simple and reliable for everyday aviation use.This version of the COMMAND HME 130 features an approximately 1.5 m connection cable with standard GA dual plugs. The headphones connect via a 6.35 mm jack plug, while the microphone uses a 5.25 mm jack plug.EPOS provides a 5-year manufacturer's warranty for the COMMAND HME 130.Features:Passive aviation headsetSuitable for General AviationDesigned for demanding high-noise cockpit environmentsClosed Around-the-Ear / Circumaural designUp to 40 dB passive noise attenuation at 1 kHzNo batteries or external power supply requiredEPOS Voice™ technologyNoise-compensated electret microphoneBidirectional microphone characteristicClear speech pickup and transmissionFlexible microphone boomMicrophone boom length approx. 21 cmMicrophone can be worn on the left or right sideDynamic speakersClosed circumaural ear cupsSoft leatherette ear padsAdjustable, padded headbandVolume control on the headsetApprox. 1.5 m connection cableStandard GA dual plugs5-year manufacturer's warrantyTechnical Specifications:Model: EPOS COMMAND HME 130EPOS Article No.: 1001342Application: General AviationNoise reduction: PassivePassive noise attenuation: Up to 40 dB at 1 kHzDesign: Closed / Circumaural / Around-the-EarSpeaker size: 36 mmHeadphone frequency response: 60 – 17,000 HzHeadphone impedance: 300 OhmsSensitivity: 96 dB at 1 kHz / 1 mWSensitivity at 1 V: 104 dB at 1 kHzMaximum sound pressure level: 120 dBTotal harmonic distortion: < 0.5% at 1 kHzMicrophone: Electret microphoneMicrophone characteristic: Noise-compensated / BidirectionalMicrophone frequency response: 160 – 10,000 HzMicrophone sensitivity: 40 mV/Pa ±3 dB at 1 kHzMicrophone supply voltage: 8 – 16 V DCRecommended load resistance: 220 OhmsMicrophone boom length: approx. 21 cmEar pads: LeatheretteContact pressure: approx. 900 g ±10%Connector: Standard GA dual plugsMicrophone connector: 5.25 mm jack plugHeadphone connector: 6.35 mm jack plugCable length: approx. 1.5 mHeadset dimensions: approx. 95 × 160 × 190 mmEar cup dimensions: approx. 115 × 85 mmOperating temperature: -15 °C to +55 °CStorage temperature: -55 °C to +70 °CManufacturer's warranty: 5 yearsScope of Delivery:EPOS COMMAND HME 130 Aviation HeadsetProtective carrying bagMicrophone windscreenCable clipQuick guideSafety guideThe EPOS COMMAND HME 130 is an excellent choice for pilots looking for a rugged passive aviation headset with high noise attenuation. The combination of up to 40 dB passive noise attenuation at 1 kHz, EPOS Voice™ technology, a noise-compensated electret microphone, closed over-ear design and standard GA dual plugs provides a reliable solution for General Aviation – without batteries or active noise cancellation.