funke Avionics
Average rating of 0 out of 5 stars
PTT-Switch, open End
Average rating of 0 out of 5 stars
Hand held, dynamic 200 Ω, without amplifier, coiled cable.
Average rating of 0 out of 5 stars
The Walter Dittel / f.u.n.k.e. Avionics FSG 90 is a proven and exceptionally rugged VHF/AM aviation transceiver for the frequency range from 118.000 to 136.975 MHz. The FSG 90 has been used worldwide for decades and is particularly known for its high reliability, long service life and robust design.Originally developed by Walter Dittel, the FSG series is now continued by f.u.n.k.e. AVIONICS. The compact radio is suitable for installation in aircraft as well as – with the appropriate approval and configuration – for ground radio and mobile applications.The FSG 90 supports both 8.33 kHz and 25 kHz channel spacing. In combined 8.33/25 kHz operation, a total of 2,278 channels are available within the frequency range from 118.000 to 136.975 MHz. Alternatively, the unit can be switched to 25 kHz operation only.For frequently used frequencies, the FSG 90 provides 99 freely programmable channel memories. This allows regularly used airport, FIS and other radio frequencies to be stored and recalled quickly and conveniently.A dedicated speech processor helps provide excellent speech quality and intelligibility, including operation with the narrower 8.33 kHz channel spacing.The FSG 90 provides an RF transmitter output power of 6 watts, making it a powerful radio solution for professional aircraft installations and compatible ground applications.The unit is designed for a nominal aircraft supply voltage of 13.8 V DC and can be operated within a supply voltage range of approximately 11.0 to 16.1 V DC.With its round front panel, the FSG 90 is designed for the classic 2¼-inch instrument panel cutout (57/58 mm). This allows the transceiver to be integrated into the instrument panel while requiring relatively little panel space.All essential operating functions are controlled via the front panel. The rear of the unit features a 25-pin D-Sub connector for the electrical installation and a BNC antenna connector.In addition to permanent aircraft installation, the FSG 90 can be used with suitable accessories in appropriate portable radio stations and carrying systems, making it suitable for certain mobile ground radio applications.The FSG 90 is also compatible with CLIMAX / Multi-Carrier systems, allowing it to be used for corresponding professional ground communication applications.Features:VHF/AM aviation transceiverProven and exceptionally rugged designUsed worldwide in professional applications for decadesFrequency range: 118.000 – 136.975 MHz8.33 kHz and 25 kHz channel spacingSwitchable 8.33/25 kHz or 25 kHz operation2,278 channels in combined 8.33/25 kHz operation760 channels in 25 kHz operation99 freely programmable channel memories6 W RF transmitter output powerDedicated speech processor for excellent speech intelligibilitySuitable for aircraft and compatible ground radio applicationsCLIMAX / Multi-Carrier compatibleCompact 2¼-inch round instrument formatInstallation diameter approx. 57/58 mm25-pin D-Sub connectorBNC antenna connectorRugged construction for long service lifeTechnical Specifications:Model: FSG 90Manufacturer: f.u.n.k.e. AVIONICS GmbH / originally Walter DittelManufacturer Part No.: F10185Device type: VHF/AM Airband TransceiverFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzNumber of channels at 8.33/25 kHz: 2,278Number of channels at 25 kHz: 760Channel memories: 99RF transmitter output power: 6 WNominal supply voltage: 13.8 V DCSupply voltage range: 11.0 – 16.1 V DCCurrent consumption: < 1.0 A receiving / < 3.0 A transmittingFrequency stability: < 1.5 ppm at -20 °C to +55 °CInstallation format: 2¼-inch round instrumentDimensions: approx. 63 × 58 × 223 mmWeight: approx. 800 gDevice connector: 25-pin D-SubAntenna connector: BNCApprovals / Standards:ETSO: EASA.21O.1305 Rev. AJTSO-2C37dJTSO-2C38dED-23B Transmitter Class 4 & 6ED-23B Receiver Class C & EBAF: D-0036/2014Installation and Connection:The FSG 90 is designed for permanent installation in a 2¼-inch instrument panel cutout. Electrical connections are made via the 25-pin D-Sub connector on the rear of the unit, while the antenna is connected via a BNC connector.A suitable wiring harness is available separately for the FSG 90. Additional accessories for aircraft installation as well as mobile and stationary applications are also available.Important Note:Installation of an approved aviation radio in an aircraft must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft. The required approvals and installation requirements should be verified before installation.Scope of Delivery:Walter Dittel / f.u.n.k.e. Avionics FSG 90 VHF/AM Aviation TransceiverWiring harness and additional installation accessories are not included unless explicitly stated and are available separately.The Walter Dittel / f.u.n.k.e. Avionics FSG 90 is a proven solution for users who place particular emphasis on ruggedness, reliability and long service life. With 8.33/25 kHz channel spacing, 99 channel memories, 6 watts of transmitter output power and a compact 2¼-inch installation format, the FSG 90 provides a professional VHF/AM communication solution for aircraft as well as appropriately approved ground and mobile applications.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833-II OLED is a modern, compact VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, specifically designed for installation in the standard 57 mm / 2¼-inch instrument panel cutout. As the successor to the proven ATR833, the ATR833-II combines modern digital signal processing with high transmitter output power, an integrated intercom, Dual Watch functionality and a high-contrast OLED display.The transmitter and receiver of the ATR833-II have been completely redesigned and use modern Digital Signal Processing (DSP). Digital processing begins immediately after the first intermediate frequency and is complemented by digital audio signal processing. This provides stable transmitter performance and clear voice communication.The ATR833-II supports both 8.33 kHz channel spacing and conventional 25 kHz channel spacing, covering the VHF aviation communication frequency range from 118.000 to 136.975 MHz.With an RF transmitter output power of 6 watts, the compact transceiver provides powerful and reliable communication for a wide range of aircraft.A particularly useful feature of the ATR833-II is its integrated Dual Watch function. In addition to the active frequency, a second frequency can be monitored simultaneously. This is useful, for example, when the pilot wants to monitor another relevant frequency while remaining on the current airport or communication frequency.The integrated voice-controlled intercom supports up to four microphones – two standard and two dynamic microphones. In many installations, this eliminates the need for a separate intercom system, helping to save weight, panel space and installation costs.The microphone inputs can be individually adjusted. In addition, the ATR833-II automatically detects the connected microphone type. When used with suitable headsets, the integrated intercom can provide a 4-place intercom system.If an external intercom system is already installed in the aircraft, the internal intercom function can be disabled.Another particularly practical feature is the recording of the most recently received radio transmission. At the push of a button, up to 9 seconds of the last received transmission can be replayed. If a frequency, call sign or instruction was not fully understood, the pilot can simply listen to the last transmission again.For frequently used frequencies, the ATR833-II provides 20 freely programmable memory locations. Each stored frequency can also be assigned an individual name, making frequently used airport, FIS or other frequencies easy to identify and recall.In addition, the ATR833-II automatically stores the 10 most recently used frequencies, allowing them to be recalled quickly.The high-contrast OLED display provides a clear overview of the relevant radio information. The OLED version offers excellent contrast and is recommended by the manufacturer particularly for installation positions that are not exposed to continuous direct sunlight.The ATR833-II can also be fully remote-controlled using the separately available ATR833RT Remote Control Unit. This provides additional installation flexibility, for example when the main radio cannot be installed in an easily accessible position.With dimensions of only 65 × 65 × 169 mm and a weight of approximately 460 g, the ATR833-II is exceptionally compact and lightweight. Installation is designed for the widely used 57 mm / 2¼-inch round instrument format.The wide supply voltage range of 11 to 30 V DC allows operation in both 12 V and 24 V aircraft electrical systems.The ATR833-II OLED is ETSO approved and meets the applicable requirements for use as an aviation VHF communication transceiver.Features:Modern VHF/AM aviation transceiver8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.975 MHzCompliant with 8.33 kHz channel spacing requirements6 W RF transmitter output power4 W audio output powerModern Digital Signal Processing (DSP)Digital audio signal processingStable transmitter performanceHigh-contrast OLED displayDual Watch technologySimultaneous monitoring of a second frequencyIntegrated voice-controlled intercomIntercom for up to 4 microphonesConnection for 2 standard and 2 dynamic microphonesAutomatic microphone type detectionIndividually adjustable microphone inputsInternal intercom can be disabled when using an external intercom systemRecording of the most recently received radio transmissionReplay of up to 9 seconds of the last received transmission20 freely programmable frequency memoriesFrequency memories with individual namesQuick recall of the 10 most recently used frequenciesRemote control via optional ATR833RT Remote Control UnitCompact 57 mm / 2¼-inch installation formatSuitable for 12 V and 24 V aircraft electrical systemsLow weight of only approx. 460 gETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833-II OLEDDevice type: VHF/AM Aviation TransceiverDisplay: OLEDFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: 6 WAudio output power: 4 WSignal processing: Digital Signal Processing (DSP)Dual Watch: YesIntercom: Integrated / voice controlledSupported microphones: Up to 4Microphone configuration: 2 standard + 2 dynamicAutomatic microphone type detection: YesFrequency memories: 20 named memory locationsRecently used frequencies: Last 10 frequencies can be recalledLast transmission replay: Up to 9 secondsSupply voltage: 11 – 30 V DCCurrent consumption, receive: approx. 220/120 mACurrent consumption, transmit: approx. 1.3/0.65 ADimensions: approx. 65 × 65 × 169 mmInstallation format: 57 mm / 2¼ inchWeight: approx. 460 gRemote control: Via optional ATR833RT Remote Control UnitApprovals / Standards:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1, H2ETSO-2C128EASA Approval: EASA.21O.10062108OLED Display Note:The OLED display provides excellent contrast and clear readability. The manufacturer recommends the OLED version particularly for installation positions that are not permanently exposed to direct sunlight.For other installation environments, the ATR833-II is also available with an LCD display.Installation:The ATR833-II OLED is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.Thanks to its wide 11 to 30 V DC supply voltage range, the transceiver can be used with both typical 12 V and 24 V aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833-II OLED VHF Aviation TransceiverDevice connectorWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833-II OLED is a modern and compact solution for pilots and aircraft owners looking for a powerful 8.33 kHz aviation transceiver in the standard 57 mm format. With 6 W transmitter output power, Dual Watch, integrated 4-place intercom, 20 named frequency memories, recall of the last 10 frequencies and a 9-second replay function for the most recently received transmission, the ATR833-II offers a comprehensive range of practical features while weighing only approximately 460 g.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833A is a fully featured VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing in a classic ARINC housing. It was developed particularly as a powerful replacement and retrofit solution for existing 25 kHz aviation radios and combines high transmitter output power with an integrated intercom and extensive frequency memory functions.The ATR833A covers the complete VHF aviation communication frequency range from 118.000 to 136.975 MHz and supports both 8.33 kHz channel spacing and conventional 25 kHz channel spacing. This makes the unit suitable for 8.33 kHz aviation communication while remaining compatible with existing 25 kHz frequencies.With an RF transmitter output power of approximately 6 watts, the ATR833A provides powerful and reliable communication for appropriately equipped aircraft.A major advantage of the ATR833A is its integrated voice-controlled intercom for up to four positions. In many installations, this eliminates the need for a separate intercom system, helping to reduce installation effort, additional wiring, weight and cost.The microphone inputs can be individually adjusted, allowing the integrated intercom to be adapted to the respective headset and cockpit configuration.For frequently used frequencies, the ATR833A provides 100 frequency memory locations with individual names. This allows regularly used airport, FIS and other frequencies to be quickly identified and recalled.In addition, the ATR833A features an integrated frequency database based on Jeppesen data for European airfields. Frequencies can be searched and selected by airfield name, making frequency selection more convenient during flight.The combination of personal frequency memories and an integrated airfield database makes the ATR833A particularly practical for cross-country flying and frequent operations at different airfields.The unit is housed in an ARINC-format enclosure, making it particularly suitable as a replacement for older aviation radios with corresponding installation dimensions. When retrofitting the unit, the existing installation, connector configuration and applicable approval requirements must be checked.The wide 10 to 30 V DC supply voltage range allows the ATR833A to be operated with both typical 12 V and 24 V aircraft electrical systems.With an audio output power of approximately 4 watts, the unit can also drive a suitable external loudspeaker.The ATR833A is ETSO approved and carries the EASA equipment approval EASA 21O.0193.Features:VHF/AM aviation transceiverARINC-format housingSuitable as a replacement and retrofit solution for compatible older 25 kHz aviation radiosFrequency range: 118.000 – 136.975 MHz8.33 kHz and 25 kHz channel spacingCompatible with 8.33 kHz aviation communication requirementsApprox. 6 W RF transmitter output powerApprox. 4 W audio output powerIntegrated voice-controlled intercomIntercom for up to 4 positionsIndividually adjustable microphone inputs100 frequency memory locationsIndividual names for stored frequenciesIntegrated frequency database for European airfieldsFrequency database based on Jeppesen dataQuick search by airfield namePersonal list of frequently used frequenciesSuitable for 12 V and 24 V aircraft electrical systemsETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833ADevice type: VHF/AM Aviation TransceiverHousing: ARINC formatFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: approx. 6 WAudio output power: approx. 4 WIntercom: Integrated / voice controlledIntercom positions: Up to 4Frequency memories: 100Memory identification: Alphanumeric / namedAirfield frequency database: IntegratedDatabase: Jeppesen / EuropeSupply voltage: 10 – 30 V DCStandby current consumption: approx. 150 mATransmit current consumption: approx. 1.8 AWeight: approx. 700 gApproval:ETSO approvedEASA Equipment Approval: EASA 21O.0193Installation:The ATR833A features an ARINC-format housing and was developed, among other applications, as a replacement for existing aviation radios using 25 kHz channel spacing.When replacing or retrofitting an existing radio, the aircraft's electrical installation, connector pin assignment, antenna system and applicable airworthiness and installation requirements must be verified.Important Note:This product is the earlier-generation ATR833A. The current successor model is the f.u.n.k.e. AVIONICS ATR833A-II.The technical specifications and functions of the ATR833A and ATR833A-II differ in several areas and should therefore not be confused.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833A VHF Aviation TransceiverWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833A is a proven solution for aircraft owners requiring an 8.33 kHz capable VHF aviation transceiver in ARINC format. With approximately 6 W transmitter output power, an integrated 4-place intercom, 100 named frequency memories and an integrated frequency database for European airfields, the ATR833A provides a comprehensive range of functions and is particularly suitable for retrofitting appropriately equipped aircraft.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833-II LCD is a modern, compact VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, specifically designed for installation in the standard 57 mm / 2¼-inch instrument panel cutout. As the successor to the proven ATR833, the ATR833-II combines modern digital signal processing with high transmitter output power, an integrated intercom, Dual Watch functionality and an LCD display that remains highly readable even in bright sunlight.The transmitter and receiver of the ATR833-II have been completely redesigned and use modern Digital Signal Processing (DSP). Digital processing begins immediately after the first intermediate frequency and is complemented by digital audio signal processing. This provides stable transmitter performance and clear voice communication.The ATR833-II supports both 8.33 kHz channel spacing and conventional 25 kHz channel spacing, covering the VHF aviation communication frequency range from 118.000 to 136.975 MHz.With an RF transmitter output power of 6 watts, the compact transceiver provides powerful and reliable communication for a wide range of aircraft.A particularly useful feature of the ATR833-II is its integrated Dual Watch function. In addition to the active frequency, a second frequency can be monitored simultaneously. This is useful, for example, when another relevant frequency needs to be monitored while remaining on the current airport or FIS frequency.The integrated voice-controlled intercom supports up to four microphones. Standard and dynamic microphones can be used, providing flexible adaptation to different headset and cockpit configurations.With suitable headsets, the integrated intercom can be used as a 4-place intercom system. If an external intercom system is already installed in the aircraft, the internal intercom function can be disabled.Another particularly practical feature is the recording of the most recently received radio transmission. At the push of a button, up to 9 seconds of the last received transmission can be replayed. If a frequency, call sign or instruction was not fully understood, the pilot can simply listen to the last transmission again.For frequently used frequencies, the ATR833-II provides 20 freely programmable memory locations. Each stored frequency can be assigned an individual name, making frequently used airport, FIS or other frequencies easy to identify and recall.In addition, the ATR833-II automatically stores the 10 most recently used frequencies, allowing them to be recalled quickly.A major advantage of this version is the LCD display. It provides excellent readability even in direct sunlight while also offering low power consumption. These characteristics make the LCD version particularly attractive for gliders and other aircraft where the instrument panel may be exposed to strong sunlight or where low electrical power consumption is important.The matrix display features a resolution of 128 × 64 pixels and provides a clear overview of the relevant radio information.The ATR833-II can also be fully remote-controlled using the separately available ATR833RT Remote Control Unit. This provides additional installation flexibility, for example in tandem cockpits or when the main radio cannot be installed in an easily accessible position.With dimensions of only 65 × 65 × 169 mm and a weight of approximately 460 g, the ATR833-II is exceptionally compact and lightweight. Installation is designed for the widely used 57 mm / 2¼-inch round instrument format.The wide supply voltage range of 11 to 30 V DC allows operation in both 12 V and 24 V aircraft electrical systems.The ATR833-II LCD is ETSO approved and meets the applicable requirements for use as a VHF aviation communication transceiver.Features:Modern VHF/AM aviation transceiver8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.975 MHz6 W RF transmitter output power4 W audio output powerModern Digital Signal Processing (DSP)Digital audio signal processingStable transmitter performance128 × 64 pixel LCD matrix displayExcellent readability in bright sunlightLow LCD power consumptionParticularly suitable for glidersDual Watch technologySimultaneous monitoring of a second frequencyIntegrated voice-controlled intercomIntercom for up to 4 microphonesStandard and dynamic microphones supportedInternal intercom can be disabledAudio input for external audio sourcesRecording of the most recently received radio transmissionReplay of up to 9 seconds of the last received transmission20 named frequency memoriesQuick recall of the 10 most recently used frequenciesRemote control via optional ATR833RT Remote Control UnitConfigurable power-saving modeCompact 57 mm / 2¼-inch installation formatSuitable for 12 V and 24 V aircraft electrical systemsLow weight of only approx. 460 gETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833-II LCDDevice type: VHF/AM Aviation TransceiverDisplay: LCD matrix displayDisplay resolution: 128 × 64 pixelsFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: 6 WAudio output power: 4 WSignal processing: Digital Signal Processing (DSP)Dual Watch: YesIntercom: Integrated / voice controlledSupported microphones: Up to 4Microphone types: Standard / dynamicAudio input: YesFrequency memories: 20 named memory locationsRecently used frequencies: Last 10 frequencies can be recalledLast transmission replay: Up to 9 secondsPower-saving mode: ConfigurableSupply voltage: 11 – 30 V DCCurrent consumption, receive: approx. 220/120 mACurrent consumption, transmit: approx. 1.3/0.65 ADimensions: approx. 65 × 65 × 169 mmInstallation format: 57 mm / 2¼ inchWeight: approx. 460 gRemote control: Via optional ATR833RT Remote Control UnitApprovals / Standards:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1, H2ETSO-2C128EASA Approval: EASA.21O.10062108Advantages of the LCD Display:The LCD display provides excellent readability even in direct sunlight while requiring comparatively little electrical power.These characteristics make the LCD version particularly suitable for gliders, motor gliders and other aircraft where the instrument panel is exposed to strong sunlight.For installation positions without direct sunlight, the ATR833-II is also available with a high-contrast OLED display.Installation:The ATR833-II LCD is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.Thanks to its wide 11 to 30 V DC supply voltage range, the transceiver can be used with both typical 12 V and 24 V aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833-II LCD VHF Aviation TransceiverDevice connectorWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833-II LCD is a modern and compact solution for pilots and aircraft owners looking for a powerful 8.33 kHz aviation transceiver in the standard 57 mm format with excellent sunlight readability. With 6 W transmitter output power, Dual Watch, integrated 4-place intercom, 20 named frequency memories, recall of the last 10 frequencies and a 9-second replay function for the most recently received transmission, the ATR833-II offers a comprehensive range of practical features while weighing only approximately 460 g.
Average rating of 0 out of 5 stars
220 V AC, charging time 14 h.
Average rating of 0 out of 5 stars
Battery NiMH for FSG 5 & FSG 8
Average rating of 0 out of 5 stars
Antenna FSG 4/FSG 5
Average rating of 0 out of 5 stars
The GS8-II portable radio station with ATR833-II OLED is a complete, self-contained VHF aviation radio station from f.u.n.k.e. AVIONICS. It combines the powerful ATR833-II OLED aviation transceiver with a portable carrying frame, independent power supply, antenna and handheld microphone to provide a complete mobile communication solution.The station is particularly suitable for airfields, gliding sites, temporary landing sites, ground stations, aviation events and temporary radio installations where a permanently installed radio system is not available.The package includes the ATR833-II with high-contrast OLED display, antenna, integrated battery, dynamic handheld microphone and charger.ATR833-II OLED Aviation RadioAt the heart of the portable station is the f.u.n.k.e. AVIONICS ATR833-II OLED.This modern VHF/AM aviation transceiver uses digital signal processing and supports both 8.33 kHz and 25 kHz channel spacing.With an RF transmitter output of 6 W, the ATR833-II provides a powerful radio solution for mobile applications.High-Contrast OLED DisplayThe OLED version of the ATR833-II features a particularly high-contrast display.Active and standby frequencies are clearly displayed and can be quickly selected using the radio controls.The OLED display provides excellent readability, particularly when the station is not exposed to direct sunlight.8.33 kHz and 25 kHz Channel SpacingThe ATR833-II meets the requirements for 8.33 kHz channel spacing while continuing to support conventional 25 kHz channel spacing.This makes the station suitable for current European aviation radio operations as well as a wide range of other applications.Dual WatchThe integrated Dual Watch function allows two frequencies to be monitored.While the active frequency is used for normal radio communication, the standby frequency can simultaneously be monitored for incoming transmissions.Say Again – Replay the Last TransmissionThe ATR833-II automatically records up to 9 seconds of the most recently received radio transmission.The recording can be replayed at the push of a button.This is particularly useful if a call sign, frequency or other important information was not fully understood when first received.Frequency MemoriesUp to 20 frequencies can be stored together with individual identifiers.In addition, the 10 most recently used frequencies can be recalled quickly.Frequently required airfield, FIS or operational frequencies can therefore be managed conveniently.Integrated IntercomThe ATR833-II features a voice-activated intercom with automatic microphone type detection.The system supports up to four microphones, including two standard and two dynamic microphones.When used as a portable ground station, operation will normally be via the supplied handheld microphone.Independent Power SupplyThe GS8-II incorporates its own 12 V battery, allowing the radio station to operate independently of a permanently installed power source.This allows the station to be used flexibly at different locations.After use, the battery can be recharged using the supplied charger.Complete Mobile Radio SolutionThe carrying frame combines the radio, battery and connection system into a compact portable unit.The station can therefore be transported easily and deployed at different locations.Unlike an individual panel-mounted aviation radio, the essential components required for mobile operation are already combined in a single unit.Typical Applications:AirfieldsGliding sitesUltralight airfieldsTemporary landing sitesGround radio stationsFlight schoolsFlying clubsAviation eventsTemporary radio installationsMobile backup radio stationFeatures:Complete portable VHF/AM aviation radio stationf.u.n.k.e. AVIONICS GS8-IIATR833-II OLED included8.33 kHz and 25 kHz channel spacing6 W RF transmitter outputDigital signal processingHigh-contrast OLED displayDual WatchRecording of the last received transmissionUp to 9 seconds replay of the most recent transmission20 programmable named frequency memoriesQuick recall of the 10 most recently used frequenciesIntegrated voice-activated intercomAutomatic microphone type detectionIntegrated batteryIndependent operation without mains powerExternal antennaDynamic handheld microphoneCharger includedRobust carrying framePortable and flexible operationATR833-II OLED Technical Specifications:Device type: VHF/AM Aviation TransceiverChannel spacing: 8.33 kHz / 25 kHzRF transmitter output: 6 WAudio output power: 4 WRadio supply voltage: 11 – 30 V DCReceive current: approx. 220 / 120 mATransmit current: approx. 1.3 / 0.65 AATR833-II dimensions: approx. 65 × 65 × 169 mmPanel cutout: 57 mm / 2¼ inchATR833-II weight: approx. 460 gDisplay: OLEDDual Watch: YesLast transmission recording: up to 9 secondsUser-programmable frequency memories: 20Last-used frequency memory: 10Intercom: Integrated / voice activatedSupported microphones: Up to 4Portable Station Power Supply:Integrated 12 V batteryReplaceable batteryPortable station charger includedIndependent mobile operation possibleATR833-II Approvals:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1, H2ETSO-2C128EASA Approval: EASA.21O.10062108Scope of Delivery:f.u.n.k.e. AVIONICS GS8-II portable stationATR833-II OLED aviation transceiverAntennaBatteryDynamic handheld microphoneChargerThe GS8-II portable station with ATR833-II OLED provides a complete and flexible aviation communication solution for mobile ground operation. With its modern 8.33 kHz aviation radio, 6 W transmitter output, Dual Watch, Say Again function, integrated battery, antenna and handheld microphone, it provides a powerful radio station without requiring a permanently installed avionics system.
Average rating of 0 out of 5 stars
The GS8-II portable radio station with ATR833-II LCD is a complete, self-contained VHF aviation radio station from f.u.n.k.e. AVIONICS. It combines the modern ATR833-II-LCD aviation transceiver with an antenna, battery, handheld microphone and charger to provide a flexible mobile communication solution.The station is particularly suitable for airfields, gliding sites, ultralight airfields, flight schools, flying clubs, aviation events and temporary radio installations where a portable aviation radio station with an independent power supply is required.At the heart of the GS8-II is the ATR833-II-LCD, providing 6 W transmitter output, digital signal processing, Dual Watch and an integrated voice-activated intercom.ATR833-II with LCD DisplayThe ATR833-II represents the advanced generation of the proven ATR833 aviation radios from f.u.n.k.e. AVIONICS.The transmitter and receiver use modern digital signal processing. The radio supports 8.33 kHz channel spacing required for European aviation radio operation and provides an RF transmitter output of 6 W.Sunlight-Readable LCD DisplayA major advantage of the LCD version is its excellent readability in sunlight combined with low power consumption.These characteristics are particularly beneficial for a portable radio station because the GS8-II is frequently operated outdoors while also being required to operate independently from mains power for extended periods.Dual WatchThe integrated Dual Watch function allows two frequencies to be monitored.While the active frequency is used for normal communication, the radio simultaneously monitors the selected standby frequency for incoming transmissions.Say Again – Replay the Last TransmissionThe ATR833-II automatically records up to 9 seconds of the most recently received radio transmission.The recording can be replayed at the push of a button.This is particularly useful if a call sign, frequency or other important information was not fully understood when first received.Frequency MemoriesThe ATR833-II provides memory functions for frequently used frequencies.Frequencies can be stored together with individual identifiers. In addition, the 10 most recently used frequencies can be recalled quickly.This makes it easy to manage frequently required airfield, operational or information frequencies.Integrated IntercomThe ATR833-II features an integrated voice-activated intercom with automatic microphone type detection.The system supports up to four microphones, including two standard and two dynamic microphones. Microphone levels can be adjusted individually.When installed in the portable GS8-II station, normal radio operation is primarily carried out using the supplied handheld microphone.Integrated Battery for Mobile OperationThe GS8-II incorporates its own battery and can therefore be operated independently of a permanently installed power supply.This allows the radio station to be positioned flexibly at different locations around an airfield or used for temporary operations.After operation, the battery can be recharged using the supplied charger.Complete Mobile Radio SolutionThe radio, power supply and connection system are combined into a portable unit.This provides a complete radio station without first having to permanently install an aviation radio in a vehicle, building or operating console.The supplied antenna and handheld microphone allow the station to be prepared quickly for use at the required location.Typical Applications:AirfieldsGliding sitesUltralight airfieldsFlight schoolsFlying clubsGround radio stationsAviation eventsTemporary radio installationsMobile backup radio stationsFlexible airfield communication stationsFeatures:Complete portable VHF/AM aviation radio stationf.u.n.k.e. AVIONICS GS8-IIATR833-II-LCD included6 W RF transmitter output8.33 kHz channel spacingDigital RF signal processingDigital audio signal processingVery stable transmitter outputLCD displayExcellent sunlight readabilityLow display power consumptionDual WatchRecording of the most recently received transmissionUp to 9 seconds replay of the last transmissionProgrammable named frequency memoriesQuick recall of the 10 most recently used frequenciesIntegrated voice-activated intercomAutomatic microphone type detectionUp to 4 microphones supported by the ATR833-IIIntegrated batteryIndependent operation without mains powerAntenna includedHandheld microphone includedCharger includedPortable and flexible operationATR833-II-LCD Technical Specifications:Device type: VHF Aviation TransceiverModel: ATR833-II-LCDRF transmitter output: 6 WAudio output power: 4 WRadio supply voltage: 11 – 30 V DCReceive current: approx. 220 / 120 mATransmit current: approx. 1.3 / 0.65 AATR833-II dimensions: approx. 65 × 65 × 169 mmHousing: 57 mm / 2¼-inch round housingATR833-II weight: approx. 460 gDisplay: LCDDual Watch: YesLast transmission recording: up to 9 secondsLast-used frequency memory: 10Intercom: Integrated / voice activatedSupported microphones: Up to 4ATR833-II Approvals:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1, H2ETSO-2C128EASA Approval: EASA.21O.10062108Scope of Delivery:f.u.n.k.e. AVIONICS GS8-II portable radio stationATR833-II-LCD aviation transceiverAntennaBatteryHandheld microphoneChargerThe GS8-II portable station with ATR833-II-LCD provides a complete and flexible aviation communication solution for mobile operation. The sunlight-readable LCD display and its low power consumption are particularly advantageous for a battery-powered outdoor station. With 6 W transmitter output, Dual Watch, Say Again, integrated battery, antenna and handheld microphone, the system provides a capable mobile radio solution for airfields, flying clubs and temporary operating locations.
Average rating of 0 out of 5 stars
Portable Station for ATR 833
Average rating of 0 out of 5 stars
Becker Avionics High Performance Microphone 1 PM 012, Dynamic
Average rating of 0 out of 5 stars
Two-seater cable set with remote wiring for gliders.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS GS8-II is a portable radio station designed for compatible aviation radios from the ATR833 family. It provides the components required to create a complete mobile radio station and is ideal for applications where the radio does not need to be permanently installed in an aircraft or building.The GS8-II is supplied without a radio, making it particularly suitable for users who already own a compatible ATR833 radio or who wish to select the required radio separately.The package includes an antenna, battery, handheld microphone and charger, providing the essential components required for a mobile radio installation.Portable Radio Station for the ATR833 FamilyThe GS8-II accommodates a compatible radio and combines it with the power supply, antenna and handheld microphone in a compact and portable unit.This allows the installed radio to be used independently of a permanent avionics installation.The current GS8-II is designed for compatible radios from the ATR833 family.Integrated Power SupplyA major advantage of the GS8-II is its integrated battery.This allows the radio station to operate independently of a permanent external power supply and makes it easy to use at different locations.After operation, the battery can be recharged using the supplied charger.Antenna IncludedA suitable antenna is included with the station.This means that a separate permanently installed aviation radio antenna is not required for normal portable operation.Handheld MicrophoneA handheld microphone is included for operation of the radio station.This makes the GS8-II particularly suitable for conventional mobile or portable ground communication applications.Ideal for Mobile ApplicationsThe portable design allows the station to be moved quickly between different operating locations.Typical applications include airfields, gliding sites, ultralight airfields, flight schools, flying clubs and temporary radio installations.The GS8-II can also be useful as a mobile backup solution when an existing radio station is temporarily unavailable.Typical Applications:AirfieldsGliding sitesUltralight airfieldsFlight schoolsFlying clubsTemporary radio installationsAviation eventsMobile ground radio stationsMobile backup radio stationsFeatures:Portable radio station from f.u.n.k.e. AVIONICSCurrent GS8-II versionDesigned for compatible ATR833 family radiosRadio not includedIntegrated batteryIndependent operation possibleAntenna includedHandheld microphone includedCharger includedCompact portable unitFlexible operation at different locationsIdeal for mobile and temporary radio installationsManufacturer Information:Manufacturer: f.u.n.k.e. AVIONICS GmbHModel: GS8-IIManufacturer designation: ZGS8-IIConfiguration: Portable radio station without radioCompatibility: ATR833 familyPower supply: BatteryImportant Note:The aviation radio itself is not included.A compatible radio must already be available or ordered separately to create a complete radio station.The functions and approvals of the completed radio station depend on the radio installed and the intended application.Scope of Delivery:f.u.n.k.e. AVIONICS GS8-II portable radio stationAntennaBatteryHandheld microphoneChargerRadio not includedThe f.u.n.k.e. AVIONICS GS8-II is a practical solution for users who want to operate a compatible ATR833 family radio as a portable radio station. With the battery, antenna, handheld microphone and charger already included, the essential components for mobile operation are provided while allowing the required radio to be selected separately or an existing compatible unit to be used.