Filter products
David Clark
Average rating of 5 out of 5 stars
The David Clark H10-66 is an exceptionally rugged passive aviation headset featuring switchable high and low impedance. It was designed for demanding applications where the headset needs to be used with different communication and intercom systems. Thanks to its switchable impedance, the H10-66 is suitable for compatible civilian as well as military applications.A key feature of the H10-66 is the integrated High/Low Impedance switch located on the ear cup. This allows the headset to be adapted to communication systems with different impedance requirements. This flexibility distinguishes the H10-66 from conventional civilian helicopter headsets with a fixed impedance configuration.The H10-66 relies entirely on passive noise attenuation and requires no batteries or external power supply. The large over-ear ear cups, combined with high-quality ear seals, provide a Noise Reduction Rating (NRR) of 27 dB, effectively reducing distracting cockpit, engine and rotor noise.For clear and reliable voice transmission, the H10-66 features a David Clark DC-87 dynamic microphone. The noise-cancelling microphone is designed for use in high-noise environments and helps ensure clear communication via radio and intercom.The proven Hinged Wire Boom allows precise positioning of the microphone in front of the mouth. Its rugged construction makes it particularly suitable for regular professional use.For a high level of comfort, the H10-66 features large, undercut Comfort-Gel ear seals. They completely surround the ears and contribute significantly to the headset's effective passive noise attenuation.The exceptionally soft foam head pad distributes the weight of the headset across the head and helps reduce uncomfortable pressure points during extended periods of use.The rugged construction for which David Clark is renowned is designed for long service life and demanding operating conditions. This makes the H10-66 particularly suitable for professional applications where reliability and durability are essential.The volume control located on the ear cup allows the listening volume to be adjusted quickly and easily.This version of the H10-66 features an approximately 1.5 m / 5 ft. extended coil cord with U-174/U connector.The David Clark H10-66 is made in the USA and comes with a 5-year manufacturer's warranty.Features:Passive aviation headsetSwitchable high and low impedanceHigh/Low Impedance switch located on the ear cupSuitable for compatible civilian and military communication systemsNo batteries or external power supply requiredNoise Reduction Rating (NRR): 27 dBAround-the-Ear / Over-Ear designLarge Comfort-Gel ear sealsEffective passive noise attenuationSuper-soft foam head padDC-87 dynamic noise-cancelling microphoneRugged Hinged Wire Boom microphone armVolume control located on the ear cupRugged David Clark constructionApprox. 1.5 m / 5 ft. extended coil cordU-174/U connectorNo batteries required5-year manufacturer's warrantyMade in USATechnical Specifications:Model: David Clark H10-66David Clark P/N: 18283G-03NSN: 5965-01-360-0454Noise reduction: PassiveNoise Reduction Rating (NRR): 27 dBImpedance: High/Low switchableHeadphones: DynamicHeadphone impedance: 150 Ohms nominal (2 × 300 Ohms parallel)Headphone frequency response: 100 Hz – 5,500 HzMicrophone: DC-87 dynamic microphoneMicrophone impedance: 5 Ohms ±20%Microphone frequency response: 300 Hz – 3,000 HzMicrophone boom: Hinged Wire BoomEar seals: Comfort-GelConnector: U-174/UCable: Coil cordExtended cable length: approx. 1.5 m / 5 ft.Power supply: Not requiredWeight: approx. 595 g / 21 oz.Manufacturer's warranty: 5 yearsImpedance Note:The David Clark H10-66 features a switchable High/Low Impedance configuration. Before use, the required impedance setting should be verified for the respective intercom or communication system. The U-174/U connector alone does not determine which impedance setting is required.Scope of Delivery:David Clark H10-66 Aviation HeadsetThe David Clark H10-66 is an exceptionally rugged and versatile solution for users who require a passive aviation headset with switchable high and low impedance. The combination of 27 dB passive noise attenuation, Comfort-Gel ear seals, DC-87 dynamic microphone and U-174/U connector makes the H10-66 particularly suitable for demanding professional, civilian and military applications.
Average rating of 0 out of 5 stars
Soft fabric cover for the ear cup of your headset.Compatible with almost all Aviation headsets.Material: fabricColour: black
Average rating of 0 out of 5 stars
The David Clark PRO-X2 with 6-pin LEMO connector and Bluetooth® is an exceptionally lightweight and compact aviation headset with active noise cancellation. Its comfortable on-ear design makes it particularly suitable for pilots who prefer a lightweight headset without compromising on effective noise reduction and modern Bluetooth connectivity.The Hybrid Electronic Noise Cancellation (ENC) combines active and passive noise reduction to effectively reduce distracting cockpit and aircraft noise. Integrated Automatic Gain Control (AGC) automatically adjusts the noise cancellation to changing noise conditions, ensuring consistently effective ENC performance.Integrated Digital Signal Processing (DSP) technology provides clear, high-quality audio reproduction for radio communications and music. The noise-cancelling M-5B electret microphone ensures clear voice transmission and can be precisely positioned in front of the mouth using the flexible microphone boom.A key feature of the PRO-X2 is its lightweight on-ear design. Unlike conventional over-ear aviation headsets, the ear seals rest on the ears rather than completely surrounding them. This keeps the headset particularly compact and lightweight. Weighing only approximately 215 g without the cable, it is ideally suited for long flights and professional use.The soft Dura-Stitched leatherette ear seals help reduce heat build-up around the ears and provide a comfortable fit. In addition, the headband features a heat-absorbing, breathable Outlast® head pad. The pivoting suspension assemblies distribute clamping pressure evenly, providing a secure and comfortable fit.The integrated Bluetooth® interface allows compatible smartphones, tablets, music players and other Bluetooth devices to be connected wirelessly to the headset. This allows users to make phone calls or listen to audio and music wirelessly.This version of the David Clark PRO-X2 features a 6-pin connector for aircraft-powered operation. In suitably equipped aircraft, the headset is powered directly by the aircraft's electrical system. The headset can also be operated with two AA batteries, for example when external power is not available.The Fail-Safe function ensures that basic communication remains available even in the event of a power failure or failure of the ENC system.Thanks to its foldable design, the PRO-X2 can be stored compactly in the supplied headset bag.Features:Hybrid Electronic Noise Cancellation (ENC)Automatic Gain Control (AGC) for optimum noise cancellationExceptionally lightweight and compact on-ear designWeight only approx. 215 g without cableDigital Signal Processing (DSP) for high-quality audio reproductionBluetooth® Wireless TechnologyConnection to smartphones, tablets and other compatible Bluetooth devicesNoise-cancelling M-5B electret microphoneFlexible microphone boom for precise positioningSoft Dura-Stitched leatherette ear sealsHeat-absorbing and breathable Outlast® head padEven distribution of clamping pressureAudio Mute function to prioritize radio communicationsFail-Safe function in the event of power failureStereo/Mono switch6-pin connectorPowered by the aircraft's electrical systemAlternative operation with 2 AA batteriesFoldable design for compact storageFAA TSO-C139a approved5-year manufacturer's warrantyTechnical specifications:Connector: 6-pin Panel MountPower supply: Aircraft power 11–30 V DC or 2 AA batteriesWeight without cable: approx. 215 gCable length: approx. 2.0 mNoise cancellation: Hybrid ENCENC frequency range: 20 Hz – 1 kHzMaximum ENC attenuation: 30 dB at 150 HzHeadphone frequency response: 12 Hz – 15 kHzMicrophone: Noise-cancelling electret microphoneBluetooth®: YesStereo/Mono: SwitchableOperating temperature: -20 °C to +55 °CBattery life without external power supply: up to 50 hoursCertification: FAA TSO-C139aManufacturer's warranty: 5 yearsScope of delivery:David Clark PRO-X2 Aviation Headset with 6-pin connector and Bluetooth®Headset bagThe David Clark PRO-X2 is an excellent alternative to conventional over-ear ANR headsets. Its exceptionally lightweight on-ear design, Hybrid ENC technology and Bluetooth® connectivity make it particularly attractive for pilots who value minimum weight and a compact design, especially on longer flights.
Average rating of 0 out of 5 stars
Windscreen for M-4 & M-7/DC Microphones. Enhances communication by suppressing wind or ambient noise.P/N 40062G-01
Average rating of 0 out of 5 stars
The David Clark H10-13.4 is one of the best-known and most proven passive aviation headsets for General Aviation. Its rugged construction, effective passive noise attenuation and high level of comfort have made the H10-13.4 one of David Clark's most popular classic pilot headsets for many years.Unlike active ANR or ENC headsets, the H10-13.4 relies entirely on passive noise attenuation and therefore requires no batteries or external power supply. The large, over-ear ear cups and high-quality ear seals provide a certified Noise Reduction Rating (NRR) of 23 dB, effectively reducing distracting cockpit, engine and aircraft noise.For clear and reliable voice transmission, the H10-13.4 features the proven David Clark M-7A noise-cancelling electret microphone. The microphone reduces distracting ambient noise during transmission, helping to ensure clear communication via radio and intercom.The Universal Flex Boom allows easy and precise positioning of the microphone directly in front of the mouth. The flexible microphone boom can be individually adjusted and reliably maintains its position.For a high level of comfort, the H10-13.4 is equipped with proven Comfort-Gel ear seals. The large, undercut ear seals completely surround the ears while also contributing significantly to the headset's passive noise attenuation.The exceptionally soft, double-foam head pad distributes the weight of the headset evenly across the head and helps reduce uncomfortable pressure points, even during longer flights.The rugged construction with a steel headband and durable ABS ear cups is designed for long service life and regular cockpit use. The connection cable is also designed to withstand high levels of pulling and bending stress.The volume control located on the outside of the ear cup allows the listening volume to be adjusted quickly and easily.This version of the H10-13.4 features the standard PJ-055 and PJ-068 dual plugs commonly used in General Aviation aircraft, together with an approximately 1.5 m straight connection cable.The David Clark H10-13.4 is FAA TSO C57b and C58a approved, exceeds RTCA/DO-214 standards and comes with a 5-year manufacturer's warranty.Features:Passive noise attenuation without batteries or external power supplyNoise Reduction Rating (NRR): 23 dBProven and rugged David Clark H10 constructionOver-ear designLarge Comfort-Gel ear sealsHigh level of comfort even during longer flightsSuper-soft, double-foam head padEven weight distribution to reduce pressure pointsM-7A noise-cancelling electret microphoneUniversal Flex Boom for precise microphone positioningVolume control located on the outside of the ear cupRugged steel constructionDurable ABS ear cupsHeavy-duty connection cableStandard dual plugs for General Aviation aircraftApprox. 1.5 m straight connection cableNo batteries requiredFAA TSO C57b and C58a approvedExceeds RTCA/DO-214 standards5-year manufacturer's warrantyMade in USATechnical Specifications:Model: David Clark H10-13.4David Clark P/N: 40411G-01Application: General AviationNoise reduction: PassiveNoise Reduction Rating (NRR): 23 dBDesign: Around-the-Ear / Over-EarHeadphones: DynamicHeadphone frequency response: 200 Hz – 5,500 HzImpedance: 150 Ohms nominalMicrophone: M-7A amplified electret microphoneMicrophone frequency response: 300 Hz – 3,500 HzHeadphone connector: PJ-055Microphone connector: PJ-068Cable: Straight connection cableCable length: approx. 1.5 mWeight without cable: approx. 488 g / 16.5 oz.Power supply: Not requiredCertification: FAA TSO C57b and C58aStandard: Exceeds RTCA/DO-214Manufacturer's warranty: 5 yearsScope of Delivery:David Clark H10-13.4 Aviation HeadsetThe David Clark H10-13.4 is a proven choice for pilots, student pilots and flight schools looking for a reliable and durable aviation headset without active electronics. The combination of 23 dB passive noise attenuation, Comfort-Gel ear seals, M-7A electret microphone and rugged David Clark construction makes the H10-13.4 a classic all-round headset for General Aviation.When ordering spare parts please allow for a delivery time of approx. 4 weeks
Average rating of 0 out of 5 stars
New Comfort-Gel ear seals with patented undercut design are 26% lighter and allow 30% more interior room for your ears for quieter, more comfortable flights.Will enhance comfort on all David Clark H10-series headsets.P/N 40863G-02Sold in Pairs.
Average rating of 0 out of 5 stars
The David Clark H10-13H is a proven passive aviation headset specifically designed for use in civilian helicopters. Based on the successful H10-13.4 design, it combines effective passive noise attenuation, excellent comfort and reliable voice transmission with the rugged construction for which David Clark is renowned.The H10-13H relies entirely on passive noise attenuation and therefore requires no batteries or external power supply. The large over-ear ear cups, combined with high-quality ear seals, provide a certified Noise Reduction Rating (NRR) of 23 dB, effectively reducing distracting cockpit, engine and rotor noise.For clear and reliable voice transmission, the H10-13H features the proven David Clark M-7A noise-cancelling electret microphone. The microphone reduces distracting background noise during transmission, helping to ensure clear communication via radio and intercom – an especially important advantage in the high-noise environment of a helicopter cockpit.The Universal Flex Boom allows easy and precise positioning of the microphone directly in front of the mouth. The flexible microphone boom can be individually adjusted and reliably maintains its position.For a high level of comfort, the H10-13H is equipped with proven Comfort-Gel ear seals. The large, undercut ear seals completely surround the ears while also contributing significantly to the headset's passive noise attenuation.The enlarged, exceptionally soft double-foam head pad distributes the weight of the headset evenly across the head. At the same time, reduced headband clamping pressure helps provide a comfortable fit even during longer flights.The rugged construction with a steel headband and durable ABS ear cups is designed for long service life and regular professional use. The molded connection cable is also engineered to withstand high levels of pulling and bending stress.The volume control with detent settings located on the outside of the ear cup allows the listening volume to be adjusted quickly and easily.This helicopter version features an approximately 1.5 m / 5 ft. extended coil cord with U-174/U connector and is suitable for appropriately equipped civilian helicopter intercom systems.The David Clark H10-13H is FAA TSO C57b and C58a approved, exceeds the requirements of RTCA/DO-214 and comes with a 5-year manufacturer's warranty.Features:Specifically designed for helicoptersPassive aviation headsetPassive noise attenuation without batteries or external power supplyNoise Reduction Rating (NRR): 23 dBProven design based on the H10-13.4Around-the-Ear / Over-Ear designLarge Comfort-Gel ear sealsReduced headband clamping pressureHigh level of comfort even during longer flightsEnlarged, super-soft double-foam head padM-7A noise-cancelling electret microphoneUniversal Flex Boom for precise microphone positioningVolume control with detent settingsRugged steel constructionDurable ABS ear cupsHeavy-duty connection cableApprox. 1.5 m / 5 ft. extended coil cordU-174/U connectorNo batteries requiredFAA TSO C57b and C58a approvedExceeds RTCA/DO-214 standards5-year manufacturer's warrantyMade in USATechnical Specifications:Model: David Clark H10-13HDavid Clark P/N: 40411G-02NSN: 5965-01-446-1533Application: HelicopterNoise reduction: PassiveNoise Reduction Rating (NRR): 23 dBDesign: Around-the-Ear / Over-EarHeadphones: DynamicHeadphone impedance: 150 Ohms nominal (2 × 300 Ohms in parallel)Headphone frequency response: 200 Hz – 5,500 HzMicrophone: M-7A amplified noise-cancelling electret microphoneMicrophone impedance: 50 Ohms ±20%Microphone frequency response: 300 Hz – 3,500 HzMicrophone boom: Universal Flex BoomEar seals: Comfort-GelConnector: U-174/UCable: Coil cordExtended cable length: approx. 1.5 m / 5 ft.Weight without cable: approx. 488 g / 16.5 oz.Power supply: Not requiredCertification: FAA TSO C57b and C58aStandard: Exceeds RTCA/DO-214Manufacturer's warranty: 5 yearsScope of Delivery:David Clark H10-13H Aviation HeadsetThe David Clark H10-13H is a proven choice for helicopter pilots, flight schools and professional operators looking for a reliable and durable headset without active electronics. The combination of 23 dB passive noise attenuation, Comfort-Gel ear seals, M-7A electret microphone and U-174/U connector makes the H10-13H a classic and rugged all-round headset for use in civilian helicopters.
Average rating of 0 out of 5 stars
The David Clark H10-13X is a classic aviation headset with Electronic Noise Cancelling (ENC), combining the proven rugged design of the David Clark H10 series with active noise reduction. It is particularly suitable for pilots who value reliable communication, high passive noise attenuation and additional electronic noise reduction.Even without ENC activated, the H10-13X provides 23 dB of passive noise reduction. With Electronic Noise Cancelling switched on, low-frequency cockpit and engine noise is reduced by an additional 17 to 22 dB. This is particularly effective at reducing the typical low-frequency noise generated in propeller aircraft.For clear voice transmission, the headset is equipped with the proven David Clark M-7A electret microphone. The noise-cancelling microphone reduces distracting ambient noise during transmission and ensures clear communication via radio and intercom.The patented Flex/Wire microphone boom allows easy and precise positioning of the microphone in front of the mouth. The flexible boom can be adjusted as required and allows the microphone to be worn on either the left or right side.For a high level of comfort, the H10-13X features soft Comfort-Gel ear seals. These completely surround the ears while also contributing to passive noise attenuation. The super-soft, double-foam head pad distributes pressure evenly and provides a comfortable fit even during longer flights.The Electronic Noise Cancelling system is powered by a 9 V battery housed in a separate battery module. One battery provides up to 25 hours of operation. A pilot-selectable automatic shut-off function helps prevent unnecessary battery consumption.The H10-13X is stereo compatible and can be switched between stereo and mono operation using an integrated selector switch. This allows the headset to be used with both conventional mono intercom systems and compatible stereo intercom and entertainment systems.The rugged steel and impact-resistant ABS construction is designed for long-term use in daily flight operations. Typical of David Clark, the H10-13X combines durable construction with proven comfort and excellent spare parts availability.Features:Electronic Noise Cancelling (ENC)23 dB passive noise reductionAdditional 17–22 dB low-frequency noise reduction with ENC activatedProven rugged David Clark H10 constructionComfort-Gel ear sealsSuper-soft, double-foam head padReduced clamping pressure for increased comfortNoise-cancelling M-7A electret microphonePatented Flex/Wire microphone boomPrecisely adjustable microphone positionMicrophone can be worn on the left or right sideStereo/Mono switchStereo compatible with suitable intercom and entertainment systemsAutomatic shut-off function to conserve battery powerPowered by a 9 V batteryBattery life up to 25 hoursStraight connection cable, approx. 1.5 mStandard dual plugs for general aviation aircraftTechnical Specifications:Model: David Clark H10-13XDavid Clark P/N: 40411G-06Noise reduction: Electronic Noise Cancelling (ENC)Passive noise reduction: NRR 23 dBAdditional active noise reduction: 17–22 dB in the low-frequency rangeHeadphones: Dynamic, ENCHeadphone frequency response: 100 Hz – 5,500 HzImpedance Mono: 150 Ohms nominalImpedance Stereo: 300 Ohms nominal per sideMicrophone: M-7A amplified electret microphoneMicrophone frequency response: 300 Hz – 3,500 HzConnector: PJ-055 / standard dual GA plugsCable length: approx. 1.5 mStereo/Mono: SwitchableENC power supply: 9 V batteryBattery life: up to 25 hoursWeight without cable: approx. 532 gScope of Delivery:David Clark H10-13X Aviation HeadsetBattery module for 9 V batteryThe David Clark H10-13X is particularly suitable for pilots who prefer the classic, rugged construction of a David Clark headset while also benefiting from active noise reduction. The combination of 23 dB passive noise attenuation and additional ENC noise reduction makes the H10-13X a reliable headset for regular use in propeller aircraft and other noisy cockpit environments.
Average rating of 0 out of 5 stars
P/N 09168P-33Authentic microphone of David Clark H10-13X, H20-10, H10-13.4, H10-13.H.
Average rating of 0 out of 5 stars
Amplified Dynamic MicrophoneP/N 12948G-14High impedancewith U173 plugincl. microphone covercompatible to David Clark H10-30
Average rating of 0 out of 5 stars
Super soft foam with cotton cloth cover. Compatible with David Clark H10 headsets. Not for use with H20-series headsets.P/N 18900G-45
Average rating of 0 out of 5 stars
The David Clark DC JET-X is an ultra-lightweight aviation headset with active noise cancellation, specifically designed for professional and airline pilots. Weighing only approximately 128 g without the cable, it combines an exceptionally lightweight and compact on-ear design with powerful Electronic Noise Cancelling (ENC) technology, excellent comfort and clear voice transmission.David Clark's Electronic Noise Cancelling (ENC) technology effectively reduces distracting cockpit and aircraft noise. Integrated Digital Signal Processing (DSP) technology supports active noise cancellation while providing clear, high-quality audio reproduction for radio communications.A key feature of the DC JET-X is its ultra-lightweight Rest-On-Ear design. Unlike conventional, larger over-ear aviation headsets, the ear seals rest directly on the ears. This keeps the headset particularly lightweight and compact – a significant advantage for pilots who wear their headset for many hours at a time.The soft Dura-Stitched leatherette ear seals with slow-recovery foam rest comfortably on the ears while helping to reduce heat build-up. The head pad incorporates proven Outlast® technology to absorb excess heat. Its breathable and ventilated design provides additional comfort, particularly during long flights.The fully adjustable headband and suspension assembly allows the headset to be individually adapted to the pilot. Despite its extremely low weight, the construction is designed to meet the demands of regular professional flight operations.For clear voice transmission, the DC JET-X features a high-performance M-5B electret microphone with enhanced noise cancellation. The flexible microphone boom allows quick and precise positioning of the microphone directly in front of the mouth.The ENC system is powered by just one AA battery, providing up to 50 hours of operating time. The enhanced Auto Shutoff function helps prevent unnecessary battery drain if the headset is accidentally left switched on after a flight.The control module also features a USB-C port, allowing the headset to be powered externally using a USB-C cable. When a suitable rechargeable battery is used, it can also be charged via the USB-C interface.This version of the DC JET-X is equipped with the standard dual plugs (PJ-055 / PJ-068) commonly used in General Aviation aircraft, making it suitable for appropriately equipped aircraft.The David Clark DC JET-X is FAA TSO-C139a approved and comes with a 3-year manufacturer's warranty.Features:Electronic Noise Cancelling (ENC)Ultra-lightweight Rest-On-Ear / On-Ear designWeight only approx. 128 g without cableSpecifically designed for professional and airline pilotsDigital Signal Processing (DSP) for active noise cancellation and high-quality audio reproductionFully adjustable headband and suspension assemblyDura-Stitched leatherette ear seals with slow-recovery foamRest-On-Ear ear seals help reduce heat build-upHeat-absorbing Outlast® head padBreathable and ventilated head padM-5B electret microphone with enhanced noise cancellationFlexible microphone boom for precise positioningCompact control module with On/Off switchPowered by one AA batteryUp to 50 hours of battery lifeAuto Shutoff function to conserve battery powerUSB-C port for external power supplyCharging via USB-C when using a suitable rechargeable batteryStandard dual plugs for General Aviation aircraftFAA TSO-C139a approved3-year manufacturer's warrantyTechnical Specifications:Model: David Clark DC JET-XDavid Clark P/N: 43107G-01Noise cancellation: Electronic Noise Cancelling (ENC)Design: Rest-On-Ear / On-EarWeight without cable: approx. 128 g / 4.5 oz.Microphone: M-5B electret microphone with noise cancellationSignal processing: Digital Signal Processing (DSP)Connector: Standard Aviation Dual PlugsPower supply: 1 × AA batteryBattery life: up to 50 hoursExternal power supply: USB-CAutomatic shutoff: YesCertification: FAA TSO-C139aManufacturer's warranty: 3 yearsScope of Delivery:David Clark DC JET-X Aviation HeadsetDavid Clark headset bagThe David Clark DC JET-X is particularly suitable for professional and airline pilots looking for an exceptionally lightweight and compact headset for long periods of use. With a weight of only around 128 g, active ENC noise cancellation, Outlast® comfort technology and a battery life of up to 50 hours, it offers an attractive alternative to significantly heavier conventional aviation headsets.
Average rating of 0 out of 5 stars
Oversized, contoured gel ear seals provide outstanding comfort and noise protection.Ear seals are designed only for replacement to non-ENC model H20-series headsets.P/N 40243G-05Sold in Pairs.
Average rating of 0 out of 5 stars
The David Clark H10-76 is an exceptionally rugged passive Low-Impedance Aviation Headset designed for professional use in military aircraft and compatible communication systems. It is one of David Clark's classic aircrew headsets and is intended for applications requiring low-impedance headphones and a low-impedance dynamic microphone.The H10-76 is used in military aviation applications including U.S. Armed Forces, NATO and other military aviation organizations. Its rugged construction is designed for demanding operating conditions and reliable communication during both flight and ground operations.The headset relies entirely on passive noise attenuation and requires no batteries or external power supply. The large over-ear ear cups, combined with high-quality ear seals, provide a Noise Reduction Rating (NRR) of 24 dB, effectively reducing distracting cockpit, engine and ambient noise.For clear and reliable voice transmission, the H10-76 features the proven David Clark M-87 / DC-87 dynamic noise-cancelling microphone. The microphone meets the requirements of the MIL-M-26542/2 USAF specification and is specifically designed to provide reliable communication in high-noise environments.The microphone has a low impedance of 5 Ohms, making the H10-76 suitable for compatible low-impedance military communication systems.The headphones are also designed for low-impedance systems. The two dynamic 19-Ohm earphone elements are connected in parallel, resulting in a nominal headphone impedance of approximately 10 Ohms.The rugged Hinged Wire Boom allows precise positioning of the microphone directly in front of the mouth and is designed to withstand the demands of regular professional use.For a high level of comfort, the H10-76 features large, undercut Comfort-Gel ear seals. They completely surround the ears, provide a comfortable fit and contribute significantly to the headset's passive noise attenuation.The enlarged, exceptionally soft double-foam head pad distributes the weight of the headset evenly across the head and helps reduce pressure points during extended periods of use.The volume control located on the ear cup allows the listening volume to be adjusted quickly and easily.This version of the H10-76 features an approximately 1.5 m / 5 ft. extended coil cord with U-174/U connector.The rugged construction of the H10-76 is designed for long service life under demanding operating conditions and is suitable for aircrew applications as well as compatible ground-support communication systems.Important: Despite using a U-174/U connector, the H10-76 is not directly compatible with all standard civilian high-impedance helicopter intercom systems due to its low-impedance configuration. The required impedance of the respective communication system should always be verified before use.Features:Passive Low-Impedance Aviation HeadsetDesigned for military aircrew and compatible communication systemsSuitable for low-impedance communication systemsPassive noise attenuation without batteries or external power supplyNoise Reduction Rating (NRR): 24 dBAround-the-Ear / Over-Ear designDynamic low-impedance headphonesTwo 19-Ohm earphone elements connected in parallelNominal headphone impedance approx. 10 OhmsM-87 / DC-87 dynamic noise-cancelling microphoneMicrophone impedance: 5 OhmsMicrophone meets MIL-M-26542/2 USAF specificationRugged Hinged Wire Boom microphone armLarge Comfort-Gel ear sealsEffective passive noise attenuationEnlarged, super-soft double-foam head padVolume control located on the ear cupRugged David Clark constructionApprox. 1.5 m / 5 ft. extended coil cordU-174/U connectorNo batteries requiredMade in USATechnical Specifications:Model: David Clark H10-76David Clark P/N: 12510G-21NSN: 5965-01-390-9240Application: Military Aircrew / Ground SupportNoise reduction: PassiveNoise Reduction Rating (NRR): 24 dBDesign: Around-the-Ear / Over-EarHeadphones: DynamicHeadphone impedance: Low Impedance, approx. 10 OhmsIndividual earphone elements: 19 Ohms, connected in parallelHeadphone sensitivity: 90 dB SPL at 1 mW / 1 kHzHeadphone frequency response: 100 Hz – 5,500 HzMicrophone: M-87 / DC-87 dynamic noise-cancelling microphoneMicrophone impedance: 5 Ohms ±20%Microphone frequency response: 300 Hz – 3,000 HzMicrophone boom: Hinged Wire BoomEar seals: Comfort-GelVolume control: YesConnector: U-174/UCable: Coil cordExtended cable length: approx. 1.5 m / 5 ft.Weight without cable: approx. 538 g / 19 oz.Power supply: Not requiredCompatibility Note:The David Clark H10-76 is a Low-Impedance headset. The U-174/U connector is used with various military as well as civilian communication systems and therefore does not by itself guarantee compatibility.The H10-76 should only be used with communication or intercom systems designed for the corresponding low headphone and microphone impedance. For typical civilian high-impedance helicopter intercom systems, a model such as the David Clark H10-13H is generally the more appropriate choice.Scope of Delivery:David Clark H10-76 Aviation HeadsetThe David Clark H10-76 is a proven solution for professional and military users requiring an exceptionally rugged passive Low-Impedance Aviation Headset. The combination of 24 dB passive noise attenuation, Comfort-Gel ear seals, low-impedance M-87 / DC-87 dynamic microphone and U-174/U connector makes the H10-76 particularly suitable for demanding aircrew and compatible military communication applications.
Average rating of 0 out of 5 stars
The David Clark H10-30 is a classic, exceptionally rugged aviation headset designed for General Aviation. For many years, David Clark's H10 series has been known for reliability, durable construction and effective passive noise attenuation. The H10-30 is particularly suitable for pilots, student pilots, flight schools and flying clubs looking for a reliable headset without active electronics.The H10-30 relies entirely on passive noise attenuation and requires no batteries or external power supply. The large over-ear ear cups, combined with high-quality ear seals, provide a Noise Reduction Rating (NRR) of 24 dB, effectively reducing distracting cockpit, engine and aircraft noise.For clear and reliable voice transmission, the H10-30 is equipped with the proven David Clark M-7/DC dynamic noise-cancelling microphone. The microphone reduces distracting ambient noise during transmission, helping to ensure clear communication via radio and intercom.The Universal Flex Boom allows easy and precise positioning of the microphone directly in front of the mouth. The flexible microphone boom can be individually adjusted and reliably maintains its position.For a high level of comfort, the H10-30 features soft Comfort-Gel ear seals. The large ear seals completely surround the ears while also contributing significantly to the headset's passive noise attenuation.The soft foam head pad distributes the weight of the headset evenly across the head and helps reduce uncomfortable pressure points, even during longer flights.The rugged construction is designed for long service life and regular cockpit use. Particularly in daily flight training and flying club operations, the H10-30 provides the durable construction and excellent spare parts availability for which David Clark is renowned.The volume controls on the ear cups allow the listening volume to be adjusted individually.This version of the H10-30 features the standard PJ-055 and PJ-068 dual plugs commonly used in General Aviation aircraft, making it suitable for appropriately equipped aircraft.The David Clark H10-30 comes with a 5-year manufacturer's warranty.Features:Passive noise attenuation without batteries or external power supplyNoise Reduction Rating (NRR): 24 dBProven and exceptionally rugged David Clark H10 constructionOver-ear designComfort-Gel ear sealsHigh level of comfort even during longer flightsSoft foam head padM-7/DC dynamic noise-cancelling microphoneUniversal Flex Boom for precise microphone positioningIndividual volume controlRugged construction for regular flight operationsStandard dual plugs for General Aviation aircraftNo batteries requiredParticularly suitable for flight schools, flying clubs and regular flight operations5-year manufacturer's warrantyMade in USATechnical Specifications:Model: David Clark H10-30David Clark P/N: 12508G-17Application: General AviationNoise reduction: PassiveNoise Reduction Rating (NRR): 24 dBDesign: Around-the-Ear / Over-EarHeadphones: DynamicMicrophone: M-7/DC dynamic noise-cancelling microphoneMicrophone boom: Universal Flex BoomHeadphone connector: PJ-055Microphone connector: PJ-068Connector: Standard Aviation Dual PlugsPower supply: Not requiredWeight without cable: approx. 567 g / 20 oz.Manufacturer's warranty: 5 yearsScope of Delivery:David Clark H10-30 Aviation HeadsetThe David Clark H10-30 is a proven choice for pilots, student pilots, flight schools and flying clubs looking for an exceptionally rugged and reliable aviation headset without active electronics. The combination of 24 dB passive noise attenuation, Comfort-Gel ear seals, M-7/DC microphone and durable David Clark construction makes the H10-30 a classic workhorse for regular use in General Aviation.