Filter products
Radios with 8,33 kHz
Average rating of 0 out of 5 stars
The Walter Dittel / f.u.n.k.e. Avionics FSG 90 is a proven and exceptionally rugged VHF/AM aviation transceiver for the frequency range from 118.000 to 136.975 MHz. The FSG 90 has been used worldwide for decades and is particularly known for its high reliability, long service life and robust design.Originally developed by Walter Dittel, the FSG series is now continued by f.u.n.k.e. AVIONICS. The compact radio is suitable for installation in aircraft as well as – with the appropriate approval and configuration – for ground radio and mobile applications.The FSG 90 supports both 8.33 kHz and 25 kHz channel spacing. In combined 8.33/25 kHz operation, a total of 2,278 channels are available within the frequency range from 118.000 to 136.975 MHz. Alternatively, the unit can be switched to 25 kHz operation only.For frequently used frequencies, the FSG 90 provides 99 freely programmable channel memories. This allows regularly used airport, FIS and other radio frequencies to be stored and recalled quickly and conveniently.A dedicated speech processor helps provide excellent speech quality and intelligibility, including operation with the narrower 8.33 kHz channel spacing.The FSG 90 provides an RF transmitter output power of 6 watts, making it a powerful radio solution for professional aircraft installations and compatible ground applications.The unit is designed for a nominal aircraft supply voltage of 13.8 V DC and can be operated within a supply voltage range of approximately 11.0 to 16.1 V DC.With its round front panel, the FSG 90 is designed for the classic 2¼-inch instrument panel cutout (57/58 mm). This allows the transceiver to be integrated into the instrument panel while requiring relatively little panel space.All essential operating functions are controlled via the front panel. The rear of the unit features a 25-pin D-Sub connector for the electrical installation and a BNC antenna connector.In addition to permanent aircraft installation, the FSG 90 can be used with suitable accessories in appropriate portable radio stations and carrying systems, making it suitable for certain mobile ground radio applications.The FSG 90 is also compatible with CLIMAX / Multi-Carrier systems, allowing it to be used for corresponding professional ground communication applications.Features:VHF/AM aviation transceiverProven and exceptionally rugged designUsed worldwide in professional applications for decadesFrequency range: 118.000 – 136.975 MHz8.33 kHz and 25 kHz channel spacingSwitchable 8.33/25 kHz or 25 kHz operation2,278 channels in combined 8.33/25 kHz operation760 channels in 25 kHz operation99 freely programmable channel memories6 W RF transmitter output powerDedicated speech processor for excellent speech intelligibilitySuitable for aircraft and compatible ground radio applicationsCLIMAX / Multi-Carrier compatibleCompact 2¼-inch round instrument formatInstallation diameter approx. 57/58 mm25-pin D-Sub connectorBNC antenna connectorRugged construction for long service lifeTechnical Specifications:Model: FSG 90Manufacturer: f.u.n.k.e. AVIONICS GmbH / originally Walter DittelManufacturer Part No.: F10185Device type: VHF/AM Airband TransceiverFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzNumber of channels at 8.33/25 kHz: 2,278Number of channels at 25 kHz: 760Channel memories: 99RF transmitter output power: 6 WNominal supply voltage: 13.8 V DCSupply voltage range: 11.0 – 16.1 V DCCurrent consumption: < 1.0 A receiving / < 3.0 A transmittingFrequency stability: < 1.5 ppm at -20 °C to +55 °CInstallation format: 2¼-inch round instrumentDimensions: approx. 63 × 58 × 223 mmWeight: approx. 800 gDevice connector: 25-pin D-SubAntenna connector: BNCApprovals / Standards:ETSO: EASA.21O.1305 Rev. AJTSO-2C37dJTSO-2C38dED-23B Transmitter Class 4 & 6ED-23B Receiver Class C & EBAF: D-0036/2014Installation and Connection:The FSG 90 is designed for permanent installation in a 2¼-inch instrument panel cutout. Electrical connections are made via the 25-pin D-Sub connector on the rear of the unit, while the antenna is connected via a BNC connector.A suitable wiring harness is available separately for the FSG 90. Additional accessories for aircraft installation as well as mobile and stationary applications are also available.Important Note:Installation of an approved aviation radio in an aircraft must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft. The required approvals and installation requirements should be verified before installation.Scope of Delivery:Walter Dittel / f.u.n.k.e. Avionics FSG 90 VHF/AM Aviation TransceiverWiring harness and additional installation accessories are not included unless explicitly stated and are available separately.The Walter Dittel / f.u.n.k.e. Avionics FSG 90 is a proven solution for users who place particular emphasis on ruggedness, reliability and long service life. With 8.33/25 kHz channel spacing, 99 channel memories, 6 watts of transmitter output power and a compact 2¼-inch installation format, the FSG 90 provides a professional VHF/AM communication solution for aircraft as well as appropriately approved ground and mobile applications.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833-II OLED is a modern, compact VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, specifically designed for installation in the standard 57 mm / 2¼-inch instrument panel cutout. As the successor to the proven ATR833, the ATR833-II combines modern digital signal processing with high transmitter output power, an integrated intercom, Dual Watch functionality and a high-contrast OLED display.The transmitter and receiver of the ATR833-II have been completely redesigned and use modern Digital Signal Processing (DSP). Digital processing begins immediately after the first intermediate frequency and is complemented by digital audio signal processing. This provides stable transmitter performance and clear voice communication.The ATR833-II supports both 8.33 kHz channel spacing and conventional 25 kHz channel spacing, covering the VHF aviation communication frequency range from 118.000 to 136.975 MHz.With an RF transmitter output power of 6 watts, the compact transceiver provides powerful and reliable communication for a wide range of aircraft.A particularly useful feature of the ATR833-II is its integrated Dual Watch function. In addition to the active frequency, a second frequency can be monitored simultaneously. This is useful, for example, when the pilot wants to monitor another relevant frequency while remaining on the current airport or communication frequency.The integrated voice-controlled intercom supports up to four microphones – two standard and two dynamic microphones. In many installations, this eliminates the need for a separate intercom system, helping to save weight, panel space and installation costs.The microphone inputs can be individually adjusted. In addition, the ATR833-II automatically detects the connected microphone type. When used with suitable headsets, the integrated intercom can provide a 4-place intercom system.If an external intercom system is already installed in the aircraft, the internal intercom function can be disabled.Another particularly practical feature is the recording of the most recently received radio transmission. At the push of a button, up to 9 seconds of the last received transmission can be replayed. If a frequency, call sign or instruction was not fully understood, the pilot can simply listen to the last transmission again.For frequently used frequencies, the ATR833-II provides 20 freely programmable memory locations. Each stored frequency can also be assigned an individual name, making frequently used airport, FIS or other frequencies easy to identify and recall.In addition, the ATR833-II automatically stores the 10 most recently used frequencies, allowing them to be recalled quickly.The high-contrast OLED display provides a clear overview of the relevant radio information. The OLED version offers excellent contrast and is recommended by the manufacturer particularly for installation positions that are not exposed to continuous direct sunlight.The ATR833-II can also be fully remote-controlled using the separately available ATR833RT Remote Control Unit. This provides additional installation flexibility, for example when the main radio cannot be installed in an easily accessible position.With dimensions of only 65 × 65 × 169 mm and a weight of approximately 460 g, the ATR833-II is exceptionally compact and lightweight. Installation is designed for the widely used 57 mm / 2¼-inch round instrument format.The wide supply voltage range of 11 to 30 V DC allows operation in both 12 V and 24 V aircraft electrical systems.The ATR833-II OLED is ETSO approved and meets the applicable requirements for use as an aviation VHF communication transceiver.Features:Modern VHF/AM aviation transceiver8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.975 MHzCompliant with 8.33 kHz channel spacing requirements6 W RF transmitter output power4 W audio output powerModern Digital Signal Processing (DSP)Digital audio signal processingStable transmitter performanceHigh-contrast OLED displayDual Watch technologySimultaneous monitoring of a second frequencyIntegrated voice-controlled intercomIntercom for up to 4 microphonesConnection for 2 standard and 2 dynamic microphonesAutomatic microphone type detectionIndividually adjustable microphone inputsInternal intercom can be disabled when using an external intercom systemRecording of the most recently received radio transmissionReplay of up to 9 seconds of the last received transmission20 freely programmable frequency memoriesFrequency memories with individual namesQuick recall of the 10 most recently used frequenciesRemote control via optional ATR833RT Remote Control UnitCompact 57 mm / 2¼-inch installation formatSuitable for 12 V and 24 V aircraft electrical systemsLow weight of only approx. 460 gETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833-II OLEDDevice type: VHF/AM Aviation TransceiverDisplay: OLEDFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: 6 WAudio output power: 4 WSignal processing: Digital Signal Processing (DSP)Dual Watch: YesIntercom: Integrated / voice controlledSupported microphones: Up to 4Microphone configuration: 2 standard + 2 dynamicAutomatic microphone type detection: YesFrequency memories: 20 named memory locationsRecently used frequencies: Last 10 frequencies can be recalledLast transmission replay: Up to 9 secondsSupply voltage: 11 – 30 V DCCurrent consumption, receive: approx. 220/120 mACurrent consumption, transmit: approx. 1.3/0.65 ADimensions: approx. 65 × 65 × 169 mmInstallation format: 57 mm / 2¼ inchWeight: approx. 460 gRemote control: Via optional ATR833RT Remote Control UnitApprovals / Standards:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1, H2ETSO-2C128EASA Approval: EASA.21O.10062108OLED Display Note:The OLED display provides excellent contrast and clear readability. The manufacturer recommends the OLED version particularly for installation positions that are not permanently exposed to direct sunlight.For other installation environments, the ATR833-II is also available with an LCD display.Installation:The ATR833-II OLED is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.Thanks to its wide 11 to 30 V DC supply voltage range, the transceiver can be used with both typical 12 V and 24 V aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833-II OLED VHF Aviation TransceiverDevice connectorWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833-II OLED is a modern and compact solution for pilots and aircraft owners looking for a powerful 8.33 kHz aviation transceiver in the standard 57 mm format. With 6 W transmitter output power, Dual Watch, integrated 4-place intercom, 20 named frequency memories, recall of the last 10 frequencies and a 9-second replay function for the most recently received transmission, the ATR833-II offers a comprehensive range of practical features while weighing only approximately 460 g.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833A is a fully featured VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing in a classic ARINC housing. It was developed particularly as a powerful replacement and retrofit solution for existing 25 kHz aviation radios and combines high transmitter output power with an integrated intercom and extensive frequency memory functions.The ATR833A covers the complete VHF aviation communication frequency range from 118.000 to 136.975 MHz and supports both 8.33 kHz channel spacing and conventional 25 kHz channel spacing. This makes the unit suitable for 8.33 kHz aviation communication while remaining compatible with existing 25 kHz frequencies.With an RF transmitter output power of approximately 6 watts, the ATR833A provides powerful and reliable communication for appropriately equipped aircraft.A major advantage of the ATR833A is its integrated voice-controlled intercom for up to four positions. In many installations, this eliminates the need for a separate intercom system, helping to reduce installation effort, additional wiring, weight and cost.The microphone inputs can be individually adjusted, allowing the integrated intercom to be adapted to the respective headset and cockpit configuration.For frequently used frequencies, the ATR833A provides 100 frequency memory locations with individual names. This allows regularly used airport, FIS and other frequencies to be quickly identified and recalled.In addition, the ATR833A features an integrated frequency database based on Jeppesen data for European airfields. Frequencies can be searched and selected by airfield name, making frequency selection more convenient during flight.The combination of personal frequency memories and an integrated airfield database makes the ATR833A particularly practical for cross-country flying and frequent operations at different airfields.The unit is housed in an ARINC-format enclosure, making it particularly suitable as a replacement for older aviation radios with corresponding installation dimensions. When retrofitting the unit, the existing installation, connector configuration and applicable approval requirements must be checked.The wide 10 to 30 V DC supply voltage range allows the ATR833A to be operated with both typical 12 V and 24 V aircraft electrical systems.With an audio output power of approximately 4 watts, the unit can also drive a suitable external loudspeaker.The ATR833A is ETSO approved and carries the EASA equipment approval EASA 21O.0193.Features:VHF/AM aviation transceiverARINC-format housingSuitable as a replacement and retrofit solution for compatible older 25 kHz aviation radiosFrequency range: 118.000 – 136.975 MHz8.33 kHz and 25 kHz channel spacingCompatible with 8.33 kHz aviation communication requirementsApprox. 6 W RF transmitter output powerApprox. 4 W audio output powerIntegrated voice-controlled intercomIntercom for up to 4 positionsIndividually adjustable microphone inputs100 frequency memory locationsIndividual names for stored frequenciesIntegrated frequency database for European airfieldsFrequency database based on Jeppesen dataQuick search by airfield namePersonal list of frequently used frequenciesSuitable for 12 V and 24 V aircraft electrical systemsETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833ADevice type: VHF/AM Aviation TransceiverHousing: ARINC formatFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: approx. 6 WAudio output power: approx. 4 WIntercom: Integrated / voice controlledIntercom positions: Up to 4Frequency memories: 100Memory identification: Alphanumeric / namedAirfield frequency database: IntegratedDatabase: Jeppesen / EuropeSupply voltage: 10 – 30 V DCStandby current consumption: approx. 150 mATransmit current consumption: approx. 1.8 AWeight: approx. 700 gApproval:ETSO approvedEASA Equipment Approval: EASA 21O.0193Installation:The ATR833A features an ARINC-format housing and was developed, among other applications, as a replacement for existing aviation radios using 25 kHz channel spacing.When replacing or retrofitting an existing radio, the aircraft's electrical installation, connector pin assignment, antenna system and applicable airworthiness and installation requirements must be verified.Important Note:This product is the earlier-generation ATR833A. The current successor model is the f.u.n.k.e. AVIONICS ATR833A-II.The technical specifications and functions of the ATR833A and ATR833A-II differ in several areas and should therefore not be confused.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833A VHF Aviation TransceiverWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833A is a proven solution for aircraft owners requiring an 8.33 kHz capable VHF aviation transceiver in ARINC format. With approximately 6 W transmitter output power, an integrated 4-place intercom, 100 named frequency memories and an integrated frequency database for European airfields, the ATR833A provides a comprehensive range of functions and is particularly suitable for retrofitting appropriately equipped aircraft.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833-II LCD is a modern, compact VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, specifically designed for installation in the standard 57 mm / 2¼-inch instrument panel cutout. As the successor to the proven ATR833, the ATR833-II combines modern digital signal processing with high transmitter output power, an integrated intercom, Dual Watch functionality and an LCD display that remains highly readable even in bright sunlight.The transmitter and receiver of the ATR833-II have been completely redesigned and use modern Digital Signal Processing (DSP). Digital processing begins immediately after the first intermediate frequency and is complemented by digital audio signal processing. This provides stable transmitter performance and clear voice communication.The ATR833-II supports both 8.33 kHz channel spacing and conventional 25 kHz channel spacing, covering the VHF aviation communication frequency range from 118.000 to 136.975 MHz.With an RF transmitter output power of 6 watts, the compact transceiver provides powerful and reliable communication for a wide range of aircraft.A particularly useful feature of the ATR833-II is its integrated Dual Watch function. In addition to the active frequency, a second frequency can be monitored simultaneously. This is useful, for example, when another relevant frequency needs to be monitored while remaining on the current airport or FIS frequency.The integrated voice-controlled intercom supports up to four microphones. Standard and dynamic microphones can be used, providing flexible adaptation to different headset and cockpit configurations.With suitable headsets, the integrated intercom can be used as a 4-place intercom system. If an external intercom system is already installed in the aircraft, the internal intercom function can be disabled.Another particularly practical feature is the recording of the most recently received radio transmission. At the push of a button, up to 9 seconds of the last received transmission can be replayed. If a frequency, call sign or instruction was not fully understood, the pilot can simply listen to the last transmission again.For frequently used frequencies, the ATR833-II provides 20 freely programmable memory locations. Each stored frequency can be assigned an individual name, making frequently used airport, FIS or other frequencies easy to identify and recall.In addition, the ATR833-II automatically stores the 10 most recently used frequencies, allowing them to be recalled quickly.A major advantage of this version is the LCD display. It provides excellent readability even in direct sunlight while also offering low power consumption. These characteristics make the LCD version particularly attractive for gliders and other aircraft where the instrument panel may be exposed to strong sunlight or where low electrical power consumption is important.The matrix display features a resolution of 128 × 64 pixels and provides a clear overview of the relevant radio information.The ATR833-II can also be fully remote-controlled using the separately available ATR833RT Remote Control Unit. This provides additional installation flexibility, for example in tandem cockpits or when the main radio cannot be installed in an easily accessible position.With dimensions of only 65 × 65 × 169 mm and a weight of approximately 460 g, the ATR833-II is exceptionally compact and lightweight. Installation is designed for the widely used 57 mm / 2¼-inch round instrument format.The wide supply voltage range of 11 to 30 V DC allows operation in both 12 V and 24 V aircraft electrical systems.The ATR833-II LCD is ETSO approved and meets the applicable requirements for use as a VHF aviation communication transceiver.Features:Modern VHF/AM aviation transceiver8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.975 MHz6 W RF transmitter output power4 W audio output powerModern Digital Signal Processing (DSP)Digital audio signal processingStable transmitter performance128 × 64 pixel LCD matrix displayExcellent readability in bright sunlightLow LCD power consumptionParticularly suitable for glidersDual Watch technologySimultaneous monitoring of a second frequencyIntegrated voice-controlled intercomIntercom for up to 4 microphonesStandard and dynamic microphones supportedInternal intercom can be disabledAudio input for external audio sourcesRecording of the most recently received radio transmissionReplay of up to 9 seconds of the last received transmission20 named frequency memoriesQuick recall of the 10 most recently used frequenciesRemote control via optional ATR833RT Remote Control UnitConfigurable power-saving modeCompact 57 mm / 2¼-inch installation formatSuitable for 12 V and 24 V aircraft electrical systemsLow weight of only approx. 460 gETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833-II LCDDevice type: VHF/AM Aviation TransceiverDisplay: LCD matrix displayDisplay resolution: 128 × 64 pixelsFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: 6 WAudio output power: 4 WSignal processing: Digital Signal Processing (DSP)Dual Watch: YesIntercom: Integrated / voice controlledSupported microphones: Up to 4Microphone types: Standard / dynamicAudio input: YesFrequency memories: 20 named memory locationsRecently used frequencies: Last 10 frequencies can be recalledLast transmission replay: Up to 9 secondsPower-saving mode: ConfigurableSupply voltage: 11 – 30 V DCCurrent consumption, receive: approx. 220/120 mACurrent consumption, transmit: approx. 1.3/0.65 ADimensions: approx. 65 × 65 × 169 mmInstallation format: 57 mm / 2¼ inchWeight: approx. 460 gRemote control: Via optional ATR833RT Remote Control UnitApprovals / Standards:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1, H2ETSO-2C128EASA Approval: EASA.21O.10062108Advantages of the LCD Display:The LCD display provides excellent readability even in direct sunlight while requiring comparatively little electrical power.These characteristics make the LCD version particularly suitable for gliders, motor gliders and other aircraft where the instrument panel is exposed to strong sunlight.For installation positions without direct sunlight, the ATR833-II is also available with a high-contrast OLED display.Installation:The ATR833-II LCD is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.Thanks to its wide 11 to 30 V DC supply voltage range, the transceiver can be used with both typical 12 V and 24 V aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833-II LCD VHF Aviation TransceiverDevice connectorWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833-II LCD is a modern and compact solution for pilots and aircraft owners looking for a powerful 8.33 kHz aviation transceiver in the standard 57 mm format with excellent sunlight readability. With 6 W transmitter output power, Dual Watch, integrated 4-place intercom, 20 named frequency memories, recall of the last 10 frequencies and a 9-second replay function for the most recently received transmission, the ATR833-II offers a comprehensive range of practical features while weighing only approximately 460 g.
Average rating of 0 out of 5 stars
Estimated delivery date approx. late AugustThe TQ KRT2-S is an exceptionally compact and lightweight VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing for permanent installation in aircraft. Weighing only approximately 360 g, with an installation depth of just 144 mm and a standard 57 mm / 2¼-inch round instrument format, the KRT2-S is particularly suitable for installations where low weight and compact dimensions are important.The KRT2-S covers the complete VHF aviation communication band and supports both 8.33 kHz and 25 kHz channel spacing. A total of 2,278 channels are available in combined 8.33/25 kHz operation.With an RF transmitter output power of 6 watts, the KRT2-S provides powerful and reliable communication for a wide range of aircraft – from gliders and motor gliders to ultralight and powered aircraft.A particularly useful feature of the KRT2-S is its integrated Dual Watch function. This allows two different frequencies to be monitored simultaneously. The two frequencies are acoustically differentiated, helping the pilot identify which frequency a received transmission originates from.The high-resolution TFT colour display has been specifically designed for cockpit use and provides excellent readability even in bright ambient light. Active and standby frequencies as well as other relevant information are clearly displayed.For frequently used frequencies, the KRT2-S provides 100 freely programmable memory locations. Each stored frequency can be assigned an individual name of up to 8 characters, allowing airport, FIS and other frequently used frequencies to be quickly identified and recalled.The KRT2-S also features an integrated intercom. Two microphone inputs allow the connection of standard or dynamic microphones. In many installations, this eliminates the need for a separate intercom system.An additional audio input allows external audio sources to be integrated into the aircraft audio system.The largely digital electronics provide high frequency stability and reliable communication while maintaining low power consumption.An additional safety feature protects against accidental continuous transmission. If the Push-to-Talk button remains activated, the transmitter automatically switches off after two minutes to prevent the radio frequency from being continuously blocked.The wide 9 to 33 V DC supply voltage range allows operation with both typical 12 V and 24 V aircraft electrical systems.The KRT2-S can also be combined with the separately available KRT2 Remote Control Unit. This provides a second control position and is particularly useful for aircraft with tandem seating, allowing the radio to be operated from both cockpit positions.Adapter solutions are also available for various older aviation radios. Depending on the existing installation, these can simplify the replacement of an existing transceiver.Features:VHF/AM aviation transceiverDesigned for permanent aircraft installation8.33 kHz and 25 kHz channel spacing2,278 channels in combined 8.33/25 kHz operation6 W RF transmitter output powerDual Watch functionSimultaneous monitoring of two frequenciesAcoustic differentiation of the two monitored frequenciesHigh-resolution TFT colour displayExcellent readability in bright ambient light100 freely programmable frequency memoriesMemory locations with names of up to 8 charactersIntegrated intercom2 microphone inputsStandard and dynamic microphones supportedAudio input for external audio sourcesHigh frequency stability thanks to largely digital electronicsAutomatic transmitter shut-off after 2 minutes of continuous transmissionRemote control via optional KRT2 Remote Control UnitIdeal for tandem cockpits with optional second control unitWide 9 – 33 V DC supply voltage rangeSuitable for 12 V and 24 V aircraft electrical systemsCompact 57 mm / 2¼-inch installation formatLow installation depthWeight only approx. 360 gETSO/TSO certifiedTechnical Specifications:Model: TQ KRT2-SDevice type: VHF/AM Aviation TransceiverDesign: Standard / Round InstrumentFrequency range: 117.975 – 137.000 MHzUsable aviation communication range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzNumber of channels: 2,278RF transmitter output power: 6 WDual Watch: YesIntercom: IntegratedMicrophone inputs: 2Microphone types: Standard / DynamicAudio input: YesFrequency memories: 100Memory identification: Up to 8 charactersDisplay: TFT colour displaySupply voltage: 9 – 33 V DCInstallation format: 57 mm / 2¼ inchInstallation diameter: approx. 57 mmInstallation depth: approx. 144 mm without connectorWeight: approx. 360 gRemote control: Yes, via optional KRT2 Remote Control UnitSafety Functions:To prevent accidental continuous transmission and prolonged blocking of a radio frequency, the KRT2-S features an automatic transmission time limit.After 2 minutes of continuous transmission, the transmitter is automatically switched off.Remote Control:The KRT2-S can be expanded with the separately available KRT2 Remote Control Unit, providing a second operating position.This is particularly useful for gliders, motor gliders and other aircraft with tandem seating arrangements. The remote unit allows the radio to be controlled from a second cockpit position.Installation:The KRT2-S is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.With an installation depth of only approximately 144 mm without connector and a weight of just 360 g, the unit is also well suited to cockpits with limited installation space.Electrical installation is carried out via the connector on the rear of the unit. A suitable wiring harness with open cable ends and additional installation components are available separately.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Approval:ETSO/TSO certifiedSupplied with EASA Form 1Scope of Delivery:TQ KRT2-S VHF Aviation TransceiverWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The TQ KRT2-S is an excellent choice for pilots and aircraft owners looking for a lightweight, compact and powerful 8.33 kHz aviation transceiver in the standard 57 mm format. With 6 W transmitter output power, Dual Watch, integrated intercom, 100 named frequency memories, TFT colour display and a weight of only approximately 360 g, the KRT2-S provides an extensive range of functions in an exceptionally compact package. Its low weight and small installation depth make it particularly attractive for gliders, motor gliders and ultralight aircraft.
Average rating of 0 out of 5 stars
The AIR Avionics AIR COM (AC-1) is an exceptionally compact and lightweight 8.33 kHz VHF aviation transceiver featuring a fully digital design. The radio module was developed for modern and flexible avionics installations, combining compact dimensions and low weight with comprehensive communication and audio functions.Thanks to its modular concept, the actual AIR COM radio module can be installed flexibly within the aircraft and operated via a separate AIR Control Display (ACD-57) or a compatible flight deck system.Please note: This product is the AIR COM radio module only. The AIR Control Display is not included and must be ordered separately if required.The fully digital architecture of the AIR COM provides modern signal and audio processing. In addition to VHF radio communication, the system offers an integrated intercom, audio mixing and extensive options for configuring audio inputs and outputs.A particularly useful feature is the Say Again function. Previously received radio transmissions can be replayed. If a call sign, frequency or instruction was not fully understood, the pilot can simply listen to the most recently received transmission again.AIR COM also features Dual Watch, allowing two frequencies to be monitored simultaneously. A particular advantage of the system is the ability to adjust the volume of the primary channel and the monitored DUAL/MON channel independently.When used in combination with the AIR Control Display ACD-57, additional functions are available. These include an airfield database, frequency memories, frequency history, GPS interface and a NEAREST airport function.The AIR Control Display features a large, high-contrast colour display with excellent sunlight readability and provides intuitive control of the connected AIR COM.Another advantage of the AIR Avionics concept is the ability to control multiple avionics functions through a common control unit. When combined with compatible AIR Avionics components, the AIR Control Display can control not only the radio but also a compatible transponder.The modular installation concept allows different installation configurations. The AIR COM can be installed directly behind an AIR Control Display. Alternatively, the radio module and display can be installed separately at different locations within the aircraft.When AIR COM and AIR Control Display are installed directly together, the total installation length is only approximately 141 mm, making the system suitable for cockpits with limited installation space.The modular concept also provides advantages for future expansion. Depending on the aircraft and cockpit configuration, one or more AIR Control Displays can be used. This is particularly useful in aircraft with tandem seating arrangements.In addition to the AIR Control Display, AIR COM can also be controlled by compatible avionics systems such as Garmin® G3X Touch® and Dynon® SkyView®, according to the manufacturer. With a compatible installation, a separate AIR Control Display may therefore not be required.Features:Modern digital VHF aviation transceiver8.33 kHz channel spacingCompact and lightweight radio moduleFully digital designIntegrated digital audio processingIntegrated intercom functionsAudio mixingConfigurable audio inputs and outputsDual Watch functionSimultaneous monitoring of two frequenciesIndependent volume adjustment for primary and DUAL/MON channelsSay Again function for replaying received radio transmissionsModular installation conceptAIR COM and AIR Control Display can be installed together or separatelyOnly approx. 141 mm total length when directly combined with AIR Control DisplayOperation via optional AIR Control Display ACD-57Support for multiple AIR Control DisplaysControl via compatible flight deck systems possibleCompatible with Garmin® G3X Touch®Compatible with Dynon® SkyView®TSO certifiedAdditional Functions with AIR Control Display:Large colour displayExcellent sunlight readabilityIntuitive operationAirfield databaseGPS interfaceNEAREST airport functionFrequency memoriesFrequency historyDual Watch with independently adjustable volume levelsCombined control of radio and compatible transponder possibleModular Installation Concept:The AIR COM was not designed as a conventional aviation radio with permanently integrated front-panel controls. Instead, the system consists of a compact radio module and a separate control solution.The AIR COM can be connected directly to an AIR Control Display ACD-57 and installed immediately behind the display.Alternatively, the radio module can be installed at another suitable location within the aircraft and connected to the display by cable.This concept allows flexible use of the available installation space and provides particular advantages in modern or compact cockpit layouts.Important Information Regarding Operation:This product includes the AIR COM radio module (AC-1).The AIR Control Display ACD-57 is not included and must be ordered separately unless another compatible control solution is used.According to the manufacturer, AIR COM can alternatively be controlled by certain compatible flight deck systems, including Garmin® G3X Touch® and Dynon® SkyView®. Compatibility of the respective avionics configuration should be verified before installation.Installation:The AIR COM can either be installed directly behind the AIR Control Display or separately at another suitable location within the aircraft.When AIR COM and AIR Control Display are installed directly together, the total system length is only approximately 141 mm.Suitable mounting brackets, installation hardware and additional accessories are available separately.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:AIR Avionics AIR COM (AC-1) VHF Aviation Radio ModuleAIR Control Display ACD-57 is not included.Installation accessories, mounting brackets and additional components are available separately unless explicitly stated otherwise.The AIR Avionics AIR COM is an excellent choice for pilots and aircraft owners looking for a modern, lightweight and flexibly installable 8.33 kHz aviation communication system. Features such as Dual Watch, Say Again, digital audio processing and integrated intercom are combined with a highly flexible modular installation concept. When used with the AIR Control Display or a compatible flight deck system, the AIR COM can be seamlessly integrated into modern cockpit and avionics configurations.
Average rating of 0 out of 5 stars
The Trig TY91 is an exceptionally compact and lightweight VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, specifically designed for aircraft with limited instrument panel space. By separating the radio module from the TC90 control head, the system offers exceptional installation flexibility and is particularly suitable for gliders, motor gliders, ultralight aircraft and other General Aviation aircraft.The TY91 supports both 8.33 kHz and 25 kHz channel spacing, making it suitable for current European aviation communication requirements as well as conventional 25 kHz operation.With an RF transmitter output power of 6 watts, the TY91 provides powerful and reliable communication for most General Aviation applications.A major advantage of the TY91 is its two-part system design. The actual radio module can be installed remotely at a suitable location within the aircraft, while only the compact TC90 control head needs to be mounted in the instrument panel.This significantly reduces the amount of panel space required. The TC90 control head measures only approximately 44 × 63 × 35 mm and can be installed either in a standard 57 mm / 2¼-inch round instrument cutout or in a compact rectangular panel opening.The clear and bright display simultaneously shows the active and standby frequencies and is designed to provide excellent readability under varying cockpit lighting conditions.The convenient Push-Step rotary control allows quick switching between 8.33 kHz and 25 kHz frequency selection, making frequency changes fast and intuitive.A particularly useful feature is Dual Watch, which allows the active and standby frequencies to be monitored simultaneously. This enables the pilot to communicate on the active frequency while monitoring another relevant frequency at the same time.The TY91 also features an integrated 2-place intercom for pilot and co-pilot. Various adjustment options allow the intercom to be adapted to different headsets and cockpit noise levels.The intercom is optimized for use with standard aviation headsets. When using a dynamic microphone, an appropriate amplified adapter is required according to Trig.The TY91 also includes an integrated audio amplifier for an external loudspeaker. This allows the radio to be used in installations where communications are reproduced through a cockpit speaker, which can be particularly useful in certain glider installations.For frequently used frequencies, 9 programmable frequency memory locations are available, allowing regularly required frequencies to be recalled quickly.The wide 11 to 33 V DC supply voltage range allows operation with both typical 12 V and 24 V aircraft electrical systems without requiring a special voltage configuration.The remote radio module measures only approximately 48 × 66 × 160 mm. Thanks to the separate installation concept, the module can be mounted behind the instrument panel or at another suitable location within the aircraft.The complete system weighs only approximately 460 g, making it particularly attractive for aircraft where low weight is an important consideration.For aircraft with tandem seating, one TY91 can be operated with two TC90 control heads. This allows the same radio to be controlled from both the front and rear cockpit positions.The TY91 is fully certified for aviation use and complies with the relevant ETSO and TSO requirements.Features:Compact VHF/AM aviation transceiver8.33 kHz and 25 kHz channel spacing6 W RF transmitter output powerSeparate radio module and TC90 control headMinimal instrument panel space requiredTC90 control head only approx. 44 × 63 × 35 mmInstallation in a standard 57 mm / 2¼-inch round instrument cutout possibleAlternative compact rectangular panel installation possibleBright and clear displaySimultaneous display of active and standby frequenciesPush-Step function for quick frequency selectionDual Watch functionSimultaneous monitoring of two frequenciesIntegrated 2-place intercomOptimized for standard aviation headsetsIntegrated audio amplifier for external loudspeakerSuitable for installations with a cockpit speaker9 programmable frequency memoriesWide 11 – 33 V DC supply voltage rangeSuitable for 12 V and 24 V aircraft electrical systemsNo cooling fan requiredRadio module can be installed separately from the control headOptional second TC90 control headIdeal for tandem cockpitsLow total system weight of approx. 460 gETSO/TSO certifiedTechnical Specifications:Model: Trig TY91Device type: VHF/AM Aviation TransceiverChannel spacing: 8.33 kHz / 25 kHzReceiver class: Class C / Class ETransmitter class: Class 4 / Class 6RF transmitter output power: 6 WDual Watch: YesIntercom: Integrated 2-place intercomFrequency memories: 9 programmable memory locationsExternal loudspeaker: Yes, integrated audio amplifierSupply voltage: 11 – 33 V DCTypical current consumption at 14 V, receive: approx. 200 mATypical current consumption at 14 V, transmit: approx. 2 ACooling: No fan requiredTotal system weight: approx. 460 gDimensions:TC90 control head: approx. 44 × 63 × 35 mmTC90 installation depth with D-Sub connector: approx. 74 mmRadio module: approx. 48 × 66 × 160 mm including connectorApprovals / Standards:ETSO-2C169aETSO-2C128TSO-C169aTSO-C128aED-23CED-67DO-186BDO-178B Level BDO-254 Level CDual Watch:The integrated Dual Watch function allows two frequencies to be monitored simultaneously.For example, the active frequency can be used for communication while the standby frequency is simultaneously monitored for incoming transmissions.Integrated Intercom:The TY91 features an integrated 2-place intercom for pilot and co-pilot.The intercom is optimized for standard aviation headsets and can be adjusted to suit different cockpit and noise conditions.When using a dynamic microphone, an appropriate amplified adapter is required.Flexible Installation:The TY91 consists of two main components:TC90 Control HeadTY91 Radio ModuleThe compact TC90 control head is installed in the instrument panel, while the actual radio module can be mounted separately at a suitable location within the aircraft.This means the system requires considerably less instrument panel space than a conventional aviation radio with an integrated transceiver module.Tandem Cockpit / Second Control Head:One TY91 can be operated with two TC90 control heads.This configuration is particularly useful for gliders, motor gliders and other aircraft with tandem seating arrangements. The radio can therefore be operated from both cockpit positions.A second TC90 control head is available separately.Installation:The TC90 control head can be installed either in a standard 57 mm / 2¼-inch round instrument cutout or in a compact rectangular panel opening.The actual TY91 radio module is installed separately at a suitable location within the aircraft.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:Trig TY91 VHF Aviation Radio SystemTY91 Radio ModuleTC90 Control HeadDevice connectorMounting trayWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The Trig TY91 is an excellent choice for pilots and aircraft owners looking for a compact, lightweight and flexibly installable 8.33 kHz aviation transceiver. With 6 W transmitter output power, Dual Watch, an integrated 2-place intercom, 9 frequency memories and a total system weight of only approximately 460 g, the TY91 provides comprehensive functionality while requiring very little instrument panel space. Its remote radio module and the option of adding a second control head make the system particularly attractive for gliders, motor gliders, ultralight aircraft and tandem cockpits.
Average rating of 0 out of 5 stars
The f.u.n.k.e. AVIONICS ATR833S is an exceptionally compact and lightweight VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout. As the modern successor to the proven ATR500, the ATR833S combines simple and intuitive operation with digital signal processing, 6 watts of transmitter output power, Dual Watch and an integrated voice-controlled intercom.Weighing only approximately 380 g, the ATR833S is one of the lighter certified aviation radios in its class. Its lightweight housing makes it particularly attractive for gliders, motor gliders, ultralight aircraft and other aircraft where low weight is an important consideration.The ATR833S covers the VHF aviation communication frequency range from 118.000 to 136.975 MHz and supports both 8.33 kHz and 25 kHz channel spacing. It therefore meets the requirements for 8.33 kHz channel spacing used in European aviation communication.With an RF transmitter output power of 6 watts, the compact radio provides powerful and reliable communication for a wide range of aircraft.The ATR833S uses modern Digital Signal Processing (DSP). Digital processing begins directly after the first intermediate frequency and is complemented by digital audio signal processing. This provides stable transmitter performance and clear, intelligible radio communication.A particularly useful feature of the ATR833S is its integrated Dual Watch function, allowing two frequencies to be monitored simultaneously. While communicating on the active frequency, the standby frequency can be monitored for incoming transmissions.The integrated voice-controlled intercom supports up to four microphones and features automatic detection of the connected microphone type. Standard and dynamic microphones can therefore be integrated into a variety of cockpit and headset configurations.If an external intercom or audio system is already installed in the aircraft, the internal intercom function of the ATR833S can be disabled.An additional external audio input is available for integrating other audio sources into the radio's audio system.For frequently used frequencies, the ATR833S provides 20 freely programmable frequency memories. Stored frequencies can be assigned individual names, making airport, FIS and other regularly used frequencies easy to identify and recall.In addition, the radio automatically stores the 10 most recently used frequencies, allowing them to be quickly recalled without having to manually re-enter the complete frequency.The bright two-line LCD display provides a clear overview of the most important information. The proven display concept of the ATR500 has been further developed for the ATR833S and enhanced with additional symbols.The deliberately straightforward operating concept makes the ATR833S particularly suitable for pilots who value simple and intuitive operation. This is also an advantage for flying clubs and shared aircraft, where the aircraft may be operated by many different pilots.With dimensions of only 65 × 65 × 163 mm, the ATR833S requires very little installation space. It fits the widely used 57 mm / 2¼-inch round instrument format.The wide 11 to 30 V DC supply voltage range allows operation in both typical 12 V and 24 V aircraft electrical systems.Various wiring adapters and wiring harnesses are available for the ATR833S. Depending on the existing installation, this can simplify the replacement of older aviation radios without requiring the complete electrical installation to be rebuilt.The ATR833S is ETSO approved and meets the applicable European requirements for use as a VHF aviation communication transceiver.Features:Modern VHF/AM aviation transceiverSuccessor to the proven ATR5008.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.975 MHzCompliant with 8.33 kHz channel spacing requirements6 W RF transmitter output power4 W audio output powerModern Digital Signal Processing (DSP)Digital audio signal processingStable transmitter performanceDual Watch technologySimultaneous monitoring of two frequenciesIntegrated voice-controlled intercomIntercom for up to 4 microphonesAutomatic microphone type detectionStandard and dynamic microphones supportedInternal intercom can be disabledExternal audio input20 freely programmable frequency memoriesFrequency memories with individual namesQuick recall of the 10 most recently used frequenciesBright two-line LCD displaySimple and intuitive operationParticularly suitable for flying clubs and shared aircraftCompact 57 mm / 2¼-inch installation formatWeight only approx. 380 gWide supply voltage rangeSuitable for 12 V and 24 V aircraft electrical systemsVarious wiring adapters available for retrofit installationsETSO approvedTechnical Specifications:Model: f.u.n.k.e. AVIONICS ATR833SDevice type: VHF/AM Aviation TransceiverFrequency range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: 6 WAudio output power: 4 WSignal processing: Digital Signal Processing (DSP)Dual Watch: YesIntercom: Integrated / voice controlledSupported microphones: Up to 4Microphone types: Standard / dynamicAutomatic microphone type detection: YesExternal audio input: YesFrequency memories: 20 named memory locationsRecently used frequencies: Last 10 frequencies can be recalledDisplay: Two-line LCD displaySupply voltage: 11 – 30 V DCCurrent consumption, receive: approx. 220/120 mACurrent consumption, transmit: approx. 1.3/0.65 ADimensions: approx. 65 × 65 × 163 mmInstallation format: 57 mm / 2¼ inchWeight: approx. 380 gApprovals / Standards:ETSO-2C169ATransmitter Class 4 & 6Receiver Class C, E, H1 & H2ETSO-2C128EASA Approval: EASA.21O.10060316Dual Watch:The integrated Dual Watch function allows two frequencies to be monitored simultaneously.While the active frequency is used for radio communication, the standby frequency can be monitored for incoming transmissions. This makes it easier to monitor or transition between airport, FIS and other relevant frequencies.Integrated Intercom:The ATR833S features an integrated voice-controlled intercom supporting up to four microphones.Automatic microphone type detection simplifies the use of different microphone and headset configurations. Both standard and dynamic microphones are supported.If an external intercom or aircraft audio system is already installed, the integrated intercom can be disabled.Ideal Successor to the ATR500:The ATR833S was developed as the modern successor to the proven ATR500.A range of wiring adapters is available for the radio. Depending on the existing installation, this can make replacing an older radio with the ATR833S considerably easier.Before replacing an existing radio, the aircraft wiring, connector pin assignment and applicable installation requirements must be verified.Installation:The ATR833S is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.With dimensions of only 65 × 65 × 163 mm and a weight of approximately 380 g, the radio is well suited to cockpits with limited installation space and aircraft where low weight is particularly important.Thanks to its 11 to 30 V DC supply voltage range, the unit can be used with both 12 V and 24 V aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:f.u.n.k.e. AVIONICS ATR833S VHF Aviation TransceiverDevice connectorWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The f.u.n.k.e. AVIONICS ATR833S is an excellent choice for pilots and aircraft owners looking for a lightweight, compact and easy-to-operate 8.33 kHz aviation transceiver in the standard 57 mm format. With 6 W transmitter output power, Dual Watch, an integrated voice-controlled intercom, 20 named frequency memories and a weight of only approximately 380 g, the ATR833S combines modern technology with straightforward operation. As the successor to the ATR500, it is also particularly attractive for suitable retrofit and modernization projects.
Average rating of 0 out of 5 stars
The AIR Avionics AIR COM & AIR Control Display Complete Set combines the compact AIR COM (AC-1) 8.33 kHz VHF aviation transceiver with the modern AIR Control Display ACD-57, creating a powerful and highly flexible avionics system.Unlike the AIR COM radio module sold separately, this set already includes the AIR Control Display ACD-57 as the control unit as well as the mounting bracket for installing the AIR COM directly behind the display. The complete set therefore provides the essential components for a modern AIR COM installation.The AIR COM was developed as a fully digital aviation radio and combines compact dimensions and low weight with modern signal and audio processing. Features such as Dual Watch, Say Again, integrated intercom and comprehensive audio functions make the system a modern alternative to conventional panel-mounted aviation radios.The AIR Control Display ACD-57 serves as the central control unit. Its large, high-resolution colour display provides excellent readability, even in bright sunlight, while offering intuitive operation of the connected AIR COM.AIR COM – Modern Digital Aviation RadioThe AIR COM (AC-1) is a compact VHF aviation transceiver with 8.33 kHz channel spacing. Thanks to its fully digital architecture, the system provides comprehensive audio and convenience functions in addition to standard radio communication.The integrated intercom provides communication within the cockpit and can eliminate the need for a separate intercom system in many installations.External audio signals can also be integrated, while the audio inputs and outputs can be configured to suit the individual aircraft installation.Dual Watch – Monitor Two Frequencies SimultaneouslyThe integrated Dual Watch function allows two radio channels to be monitored simultaneously.A particular advantage of the AIR COM system is that the volume levels of the primary channel and DUAL/MON channel can be adjusted independently. This allows the monitored secondary frequency to be individually adapted to the current flight situation.Say Again – Replay the Last Radio TransmissionA particularly useful feature of AIR COM is Say Again.Previously received radio transmissions can be replayed. If a call sign, frequency or instruction was not fully understood, the pilot can simply listen to the most recently received transmission again.This can be particularly useful during high-workload phases of flight.AIR Control Display ACD-57The included AIR Control Display ACD-57 is considerably more than a simple control head for the radio.The compact multifunction display was designed for a standard 57 mm / 2¼-inch instrument panel cutout and provides a particularly large display area within its compact dimensions.The brilliant colour display offers a wide viewing angle and excellent readability even in direct sunlight. At the same time, the system has been designed for low power consumption.Operation is via four buttons and a concentric dual rotary control with push function. The user interface automatically adapts to the connected and activated functions.Airfield Database and NEAREST FunctionWhen used with a valid frequency database, the ACD-57 provides convenient access to aviation communication frequencies.Available functions include:Airfield databaseStation names for radio frequenciesFrequency memoriesFrequency historyGPS interfaceNEAREST airport / station functionQuick manual frequency entryThe NEAREST function can be used, for example, to display nearby stations and select the required frequency directly.The standard scope of delivery of the AIR Control Display includes a voucher for two years of free frequency database updates.Flexible InstallationAIR COM and AIR Control Display can be installed in different configurations.For a particularly compact installation, the AIR COM can be mounted directly behind the ACD-57 using the mounting bracket included in this set. The AIR COM and display then form a compact unit.In this configuration, the total system length is only approximately 141 mm.Alternatively, AIR COM and ACD-57 can be installed separately. The radio module can be mounted at another suitable location within the aircraft, while only the compact display is installed in the instrument panel.This flexibility is particularly advantageous in cockpits with limited installation space.Multiple Displays and Tandem CockpitsThe modular AIR Avionics concept also allows multiple AIR Control Displays to be installed within one aircraft.This can be particularly useful in gliders, motor gliders and other aircraft with tandem seating arrangements.The connected displays are synchronized via the integrated CANaerospace system.Expandable with Transponder and Altimeter FunctionsA major advantage of the AIR Control Display is its expandability.The ACD-57 can control not only the AIR COM but also compatible AIR Avionics transponders and selected transponders from other manufacturers.This makes it possible, for example, to control both the radio and transponder from a single 57 mm display.The ACD-57 also features an integrated altitude encoder and, with the appropriate optional software licence, can be used as a fully ETSO-approved altimeter.Depending on the configuration, a single compact 57 mm unit can therefore combine the functions of:Radio control headTransponder control headAltimeterSome of these additional functions require separately available hardware and/or software licences.Features:Complete set including AIR COM and AIR Control DisplayModern digital VHF aviation communication system8.33 kHz channel spacingAIR COM (AC-1) radio moduleAIR Control Display ACD-57Mounting bracket for direct installation of AIR COM behind ACD-57Fully digital radio architectureDigital signal and audio processingIntegrated intercomAudio mixingConfigurable audio inputs and outputsDual Watch functionSimultaneous monitoring of two radio channelsIndependent volume adjustment for primary and DUAL/MON channelsSay Again functionReplay of previously received radio transmissionsLarge colour displayExcellent sunlight readabilityWide viewing angleIntuitive operation57 mm / 2¼-inch installation formatAirfield databaseStation name displayFrequency memoriesFrequency historyGPS interfaceNEAREST functionmicroSD card slotFlexible installationAIR COM can be installed directly behind the ACD-57AIR COM and ACD-57 can alternatively be installed separatelyOnly approx. 141 mm total length when directly combinedMultiple AIR Control Displays can be used within one aircraftParticularly suitable for tandem cockpitsControl of compatible transponders possibleIntegrated altitude encoderOptional altimeter function via software licenceAIR COM TSO certifiedACD-57 developed and approved according to applicable aviation standardsAIR Control Display – Technical Specifications:Model: AIR Control Display ACD-57Installation format: 57 mm / 2¼ inchDimensions: approx. 61.5 × 61.5 × 26.3 mmWeight: approx. 150 gDisplay: Colour displayReadability: Suitable for direct sunlightControls: 4 buttonsRotary control: Concentric dual rotary knob with push functionConnections: 2 × D-Sub 15HDStorage medium: microSD cardRadio control: YesIntercom control: YesTransponder control: Yes, with compatible equipmentAltitude encoder: IntegratedAltimeter: Optional via software licenceInstallation:The complete set provides two basic installation options.Direct Installation:The AIR COM is mounted directly behind the AIR Control Display using the supplied mounting bracket. This creates a compact unit with a total length of only approximately 141 mm.Separate Installation:Alternatively, the AIR COM radio module can be installed at another suitable location within the aircraft. The ACD-57 remains as the compact control unit in the instrument panel.This allows particularly flexible use of the available installation space.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Optional Expansion Options:AIR Avionics transponderCompatible transponders from other manufacturersAdditional AIR Control DisplaysAltimeter software licenceAdditional function licencesInstallation and wiring accessoriesSome functions may require additional hardware or separately purchased software licences.Scope of Delivery:AIR COM (AC-1) 8.33 kHz VHF Aviation Transceiver – standard scope of deliveryAIR Control Display ACD-57 – standard scope of deliveryMounting bracket for installing AIR COM directly behind the ACD-57The standard ACD-57 package includes, among other items:ACD-57 main unitMounting screwsDocumentationmicroSD memory cardVoucher for two years of free frequency database updatesAdditional installation and wiring accessories are available separately unless explicitly stated otherwise. Additional functions may require separately purchased software licences.The AIR Avionics AIR COM & AIR Control Display Complete Set is an excellent solution for pilots and aircraft owners looking for a modern, compact and flexibly expandable 8.33 kHz aviation communication system. The combination of AIR COM, a large sunlight-readable colour display, Dual Watch, Say Again, integrated intercom, airfield database and NEAREST function provides a high level of operating convenience while requiring very little instrument panel space.The ability to later integrate a compatible transponder or certified altimeter functionality into the ACD-57 makes the system particularly attractive for modern cockpits where multiple avionics functions need to be accommodated within a limited amount of instrument panel space.
Average rating of 0 out of 5 stars
The Trig TY96 is a powerful VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing for permanent installation in General Aviation aircraft. With 10 watts of RF transmitter output power, an exceptionally slim 33 mm stack height, and advanced features including Dual Watch, Say Again, an integrated 2-place stereo intercom and a programmable frequency database, the TY96 combines high radio performance with convenient and intuitive operation.The TY96 supports both 8.33 kHz and 25 kHz channel spacing, making it suitable for current European aviation communication requirements as well as conventional 25 kHz operation.With an RF transmitter output power of 10 watts, the TY96 provides significantly more output power than many compact 6 W aviation radios, making it particularly suitable for demanding installations in powered aircraft and other General Aviation applications.Ultra-Slim Stack DesignA major advantage of the TY96 is its exceptionally compact panel height.At only 33 mm high, the radio requires very little space in the avionics stack, allowing efficient use of available instrument panel space.The front panel measures approximately 33 × 159 mm, while the installation depth in the tray is approximately 230 mm.Its slim design also makes the TY96 particularly attractive for retrofit and avionics upgrade projects.Bright and Clear DisplayThe clear display simultaneously shows the active and standby frequencies.In addition, ICAO identifiers or individually programmed station names can be displayed for stored frequencies, making frequently used airports and radio stations easy to identify.The user interface has been designed for straightforward operation, keeping important functions easily accessible during flight.Push Step – Fast Frequency SelectionTrig's convenient Push Step rotary control allows quick switching between 8.33 kHz and 25 kHz frequency tuning.This makes frequency selection fast and efficient without requiring the pilot to scroll through unnecessary intermediate frequency steps.Dual Watch – Monitor Two Frequencies SimultaneouslyThe integrated Dual Watch function allows the active and standby frequencies to be monitored simultaneously.The pilot can communicate on the active frequency while monitoring another relevant frequency at the same time.This is particularly useful when preparing for a frequency change or when another important radio channel needs to be monitored.Say Again – Replay the Last Radio TransmissionA particularly useful feature of the TY96 is Say Again.The radio automatically records the most recently received transmission. At the push of a button, the transmission can be replayed.If a call sign, clearance, frequency or other instruction was not fully understood, the pilot can listen to the last transmission again instead of immediately requesting a repeat.This feature can be particularly useful during high-workload phases of flight and is valuable for both experienced pilots and student pilots.Emergency Button – Direct Access to 121.5 MHzThe TY96 features a dedicated Emergency button.This provides rapid access to the international emergency frequency 121.500 MHz, avoiding the need to manually tune the frequency during a stressful situation.Integrated 2-Place Stereo IntercomThe TY96 features an integrated 2-place intercom for pilot and co-pilot.In many installations, this can eliminate the need for a separate intercom system.The audio system also supports stereo music and additional audio inputs for warning signals and other external audio sources.Non-critical audio sources can be configured to reduce in volume or mute automatically during radio communications, while important warning signals can remain audible.Programmable Frequency DatabaseAnother major advantage of the TY96 is its integrated, user-configurable frequency database.More than 200 frequencies and associated identifiers can be stored in the radio.These can include frequently used:AirportsTower frequenciesGround frequenciesATIS frequenciesFIS frequenciesApproach frequenciesOther radio stationsThe database can be loaded and updated using the USB port on the front panel.The frequency database uses a user-configurable CSV file, allowing operators to create their own customized list of frequently used frequencies. No ongoing subscription fee is required for the user-created database.This feature is particularly useful for flying clubs, flight schools and fleet operators, where commonly used frequencies can be prepared in advance.GPS IntegrationThe TY96 supports integration with compatible GPS and avionics systems using the SL40 protocol.This allows frequency information to be transferred from compatible navigation equipment to the radio, providing convenient integration into suitably equipped avionics systems.Efficient Cooling Without a FanDespite its powerful 10 W transmitter output, the TY96 does not require an additional cooling fan.The radio has been designed for efficient heat dissipation without external active cooling, reducing noise and eliminating an additional moving component within the avionics installation.Features:VHF/AM aviation transceiver8.33 kHz and 25 kHz channel spacing10 W RF transmitter output powerUltra-slim stack-mounted designOnly 33 mm panel heightBright and clear displaySimultaneous display of active and standby frequenciesDisplay of ICAO or custom station identifiersPush Step functionQuick switching between 8.33 and 25 kHz tuningDual Watch functionSimultaneous monitoring of two frequenciesSay Again functionReplay of the most recently received radio transmissionDedicated Emergency buttonDirect access to 121.500 MHzIntegrated 2-place intercomStereo audio supportStereo music inputAdditional audio inputs for warnings and other audio sourcesConfigurable audio mutingProgrammable frequency databaseStorage for more than 200 frequencies and identifiersICAO and custom station identifiersFront-panel USB portFrequency database updates via USBUser-configurable CSV frequency databaseNo subscription fees for the user-created frequency databaseGPS / avionics integration via SL40 protocol11 – 33 V DC supply voltageSuitable for 12 V and 24 V aircraft electrical systemsNo cooling fan requiredParticularly suitable for General AviationIdeal for flight schools and flying clubsETSO and TSO approvedTechnical Specifications:Model: Trig TY96Device type: VHF/AM Aviation TransceiverChannel spacing: 8.33 kHz / 25 kHzRF transmitter output power: 10 WDual Watch: YesSay Again: YesEmergency function: Yes, 121.500 MHzIntercom: Integrated 2-place intercomStereo audio: YesAdditional audio inputs: YesFrequency database: More than 200 frequencies and identifiersDatabase transfer: USBGPS / avionics interface: SL40 protocolSupply voltage: 11 – 33 V DCTypical current consumption at 14 V, receive: approx. 265 mAOperating temperature: -20 °C to +55 °CCooling: No fan requiredWeight: approx. 0.95 kgFront panel dimensions: approx. 33 × 159 mmInstallation depth in tray: approx. 230 mmApprovals / Standards:ETSO-2C128ETSO-2C169aTSO-C128aTSO-C169aED-23CED-67DO-186BDO-207DO-178B Level BDO-254 Level CDO-160GDual Watch:With Dual Watch, two frequencies can be monitored simultaneously.The active frequency remains available for radio communication while the standby frequency can be monitored for incoming transmissions.Say Again:The Say Again function allows the most recently received radio transmission to be replayed.This is particularly useful if a clearance, call sign, frequency or other instruction was not fully understood.Emergency Function:The dedicated Emergency button provides rapid access to the international emergency frequency 121.500 MHz.This allows the emergency frequency to be selected quickly without manually entering it.Frequency Database and USB:The TY96 features a user-configurable frequency database capable of storing more than 200 frequencies and identifiers.The database can be loaded via the USB port on the front panel.Frequently used airports and radio stations can therefore be prepared in advance and quickly recalled by their identifier.Integrated Intercom and Audio:The integrated 2-place intercom provides communication between pilot and co-pilot.Stereo music and external audio sources can also be connected. This allows audio warnings from other avionics equipment to be reproduced through the connected headsets.Installation:The TY96 is designed as an exceptionally slim stack-mounted aviation radio.With a front panel height of only 33 mm, it requires very little space in the avionics stack. Installation depth in the tray is approximately 230 mm.The wide 11 to 33 V DC supply voltage range allows installation in both 12 V and 24 V aircraft electrical systems.No additional cooling fan is required.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:Trig TY96 VHF Aviation TransceiverInstallation and wiring accessories are available separately unless explicitly stated as included.The Trig TY96 is a powerful solution for pilots and aircraft owners looking for a modern 8.33 kHz aviation transceiver with high 10 W transmitter output and minimal avionics stack space requirements. With Dual Watch, Say Again, a dedicated Emergency button, integrated 2-place stereo intercom and a USB-programmable database for more than 200 frequencies, the TY96 provides a comprehensive range of features for convenient and efficient aviation communication.The combination of high transmitter output, an ultra-slim 33 mm panel height and extensive convenience features makes the TY96 particularly attractive for powered aircraft, flight schools, flying clubs and modern General Aviation cockpits.
Average rating of 0 out of 5 stars
The Becker Avionics RT6211, 10 W is a high-performance, remotely installed VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, designed for professional and demanding avionics installations. As an advanced development of the proven RT6201, the RT6211 features an increased Design Assurance Level C (DAL C), meeting more stringent requirements for the development and certification of safety-related avionics systems.The RT6211 is part of the proven Becker Avionics 6200 Series and combines compact dimensions, low weight and robust construction with comprehensive communication and intercom functions.Unlike a conventional panel-mounted aviation radio, the RT6211 has no integrated control panel. The radio module is installed at a suitable location within the aircraft and controlled via a separate control unit, such as the Becker RCU6211.This remote concept provides exceptional installation flexibility and is ideal for cockpits where instrument panel space is limited or where the transceiver needs to be installed at another location within the aircraft.DAL C – Designed for Demanding Avionics IntegrationsA major difference compared with the RT6201 is the increased Design Assurance Level C.By raising the Design Assurance Level from DAL D to DAL C, the RT6211 meets more stringent requirements for the development and verification of avionics hardware and software.This makes the RT6211 particularly suitable for demanding certified avionics integrations and professional applications.8.33 kHz and 25 kHz Channel SpacingThe RT6211 supports both modern 8.33 kHz and conventional 25 kHz channel spacing.The frequency range extends from 118.000 to 136.990 MHz.Up to 760 channels are available in 25 kHz operation and up to 2,280 channels in 8.33 kHz operation.The radio therefore meets the requirements for European 8.33 kHz aviation communication.Up to 10 W Transmitter OutputThe high-power version of the RT6211 provides an RF transmitter output of:at least 6 W with a 12/14 V electrical systemat least 10 W with a 28 V electrical systemThe RT6211 therefore provides particularly high transmitter output when operated in a 28 V aircraft electrical system and is well suited to installations requiring a powerful VHF communication solution.Dual Watch / SCAN ModeThe RT6211 supports Becker's Dual Watch function, also referred to as SCAN Mode.This allows a second frequency to be monitored in addition to the active frequency.For example, the pilot can communicate on the active frequency while simultaneously monitoring the standby frequency for incoming transmissions.Integrated 4-Place IntercomThe 10 W version of the Becker 6200 Series features an integrated VOX-controlled 4-place intercom.The intercom provides two separate intercom circuits and supports separate Push-to-Talk functions for pilot and co-pilot.In many installations, this can eliminate the need for a separate intercom system.The system can be adapted to different microphone, headset and cockpit configurations.External Audio InputThe integrated AUX audio input allows additional audio signals to be connected to the aircraft audio system.This can be used, for example, to reproduce audio warnings or signals from other avionics equipment through the connected headsets.Loudspeaker OutputIn addition to the headset outputs, the 6200 Series provides a powerful loudspeaker output.Output power is at least 4 W into 4 ohms.With a suitable installation, the system can therefore also drive an external cockpit loudspeaker.Flexible Remote InstallationThe RT6211 was specifically designed for remote installation.The radio module can be mounted at a suitable location within the aircraft and operated using a separate control unit.A typical configuration consists of:Becker RT6211 Remote TransceiverBecker RCU6211 Remote Control UnitThe RCU6211 uses a compact 2¼-inch / 58 mm format and requires very little instrument panel space.The remote concept also provides greater flexibility when planning the location of the radio module, antenna cabling and other installation components.Tandem OperationThe Becker 6200 Series also supports tandem configurations.This is particularly useful for gliders, motor gliders, training aircraft and other aircraft with tandem seating arrangements.Depending on the installation, multiple control positions can be used, allowing the radio to be operated from different cockpit positions.Robust DesignThe Becker 6200 Series was developed for demanding aviation environments.The unit operates without forced-air cooling or a cooling fan, eliminating additional moving components from the cooling system.Its robust design is intended to provide high reliability and long service life.Features:Professional VHF/AM aviation transceiverRemote transceiver for flexible installationAdvanced development of the proven RT6201Design Assurance Level C (DAL C)8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.990 MHzUp to 2,280 channels with 8.33 kHz spacing760 channels with 25 kHz spacingAt least 6 W RF transmitter output at 12/14 VAt least 10 W RF transmitter output at 28 VDual Watch / SCAN ModeSimultaneous monitoring of a second frequencyIntegrated VOX-controlled intercom4-place intercomTwo separate intercom circuitsSeparate PTT functions for pilot and co-pilotAUX audio inputLoudspeaker outputAt least 4 W loudspeaker output into 4 ohmsAutomatic storage of recently used frequenciesRF signal indicationAdjustable squelch thresholdRemote operation via RCU6211Tandem operation possibleFlexible positioning of the radio moduleNo forced-air cooling requiredNo cooling fanRobust and low-maintenance designWide supply voltage rangeSuitable for 12 V and 24/28 V aircraft electrical systemsETSO/TSO certifiedFCC approvedTechnical Specifications:Model: Becker Avionics RT6211Device type: Remote VHF/AM Aviation TransceiverDesign Assurance Level: DAL CFrequency range: 118.000 – 136.990 MHzChannel spacing: 8.33 kHz / 25 kHzChannels at 25 kHz: 760Channels at 8.33 kHz: 2,280RF transmitter output at 12/14 V: ≥ 6 WRF transmitter output at 28 V: ≥ 10 WSupply voltage: 10.25 – 33 V DCEmergency operating voltage: 9.0 – 10.25 V DCCurrent consumption, receive / standby at 12 V: ≤ 140 mACurrent consumption, transmit at 12 V: < 2 ADual Watch: YesIntercom: Integrated / VOX controlledIntercom positions: Up to 4Intercom circuits: 2AUX audio input: YesHeadphone output: ≥ 300 mW into 150 ohms / ≥ 100 mW into 600 ohmsLoudspeaker output: ≥ 4 W into 4 ohmsSquelch: AdjustableMaximum operating altitude: 35,000 ftWeight: approx. 600 gDimensions:RT6211 Remote Transceiver with mounting frame:Width: approx. 67 mmHeight: approx. 40 mmLength: approx. 188 mmThe compact radio module can be installed separately from the control unit at a suitable location within the aircraft.Approvals / Standards:ETSO-2C37eETSO-2C38eTSO-C169aFCC approvedEASA Approval: EASA.21O.10075461Design Assurance Level: DAL CDual Watch / SCAN Mode:The integrated Dual Watch function allows a second frequency to be monitored in addition to the active frequency.This is particularly useful when preparing for a frequency change or when another relevant radio channel needs to be monitored simultaneously.Integrated Intercom:The 10 W version of the RT6211 provides an integrated VOX-controlled 4-place intercom.Two separate intercom circuits and individual PTT functions for pilot and co-pilot allow the system to be adapted to different cockpit configurations.Installation and Operation:The RT6211 is a remote transceiver without an integrated control panel.A suitable separate control unit, such as the Becker Avionics RCU6211, is required for operation.This allows the radio module to be installed independently of the instrument panel at a suitable location within the aircraft.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:Becker Avionics RT6211 Remote VHF Transceiver, 10 W versionConnector kitMounting frameThe RCU6211 control unit is not included unless explicitly stated otherwise and is available separately.Additional wiring and installation accessories are available separately unless explicitly stated otherwise.The Becker Avionics RT6211, 10 W is a powerful solution for aircraft owners and avionics professionals looking for a professional, flexibly installable 8.33 kHz aviation communication system with DAL C design assurance.With up to 10 W transmitter output, Dual Watch, an integrated 4-place intercom, two separate intercom circuits and a flexible remote installation concept, the RT6211 is particularly suitable for demanding avionics installations where reliability, certification and flexible system integration are key requirements.
Average rating of 0 out of 5 stars
The Becker Avionics AR6213, 6 W is a professional VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing in the classic 160 mm / 6.25-inch avionics stack format. As part of the proven Becker Avionics 6200 Series, the AR6213 combines modern digital signal processing, an integrated intercom, Dual Watch and comprehensive audio functions with a high level of certification.The AR6213 series features Design Assurance Level C (DAL C), making it particularly suitable for demanding and certified avionics installations.Unlike the remote transceivers of the RT62xx series, the AR6213 is designed as a single-block transceiver with an integrated control panel. The radio and controls are housed in a single unit, so no separate Remote Control Unit is required for normal operation.8.33 kHz and 25 kHz Channel SpacingThe AR6213 supports both modern 8.33 kHz and conventional 25 kHz channel spacing.The frequency range extends from 118.000 to 136.990 MHz.Up to 760 channels are available with 25 kHz spacing and up to 2,280 channels with 8.33 kHz spacing.The radio therefore meets the requirements for European 8.33 kHz aviation communication.6 W Transmitter OutputThis model is the 6 W version of the AR6213.RF transmitter output is at least 6 watts into 50 ohms.Unlike the higher-power AR6213 version, which can provide at least 10 W at 28 V, this version remains a 6 W model in both 12/14 V and 24/28 V installations.It is therefore suitable for both typical 12/14 V and 24/28 V aircraft electrical systems.Modern Digital Signal ProcessingThe Becker Avionics 6200 Series uses modern Digital Signal Processing (DSP) technology.The high level of digital integration provides efficient signal processing and reliable communication while helping to keep the unit compact and lightweight.Dual Watch / SCAN ModeThe AR6213 features Becker's Dual Watch function, also referred to as SCAN Mode.This allows a second frequency to be monitored in addition to the active frequency.For example, the pilot can communicate on the active frequency while simultaneously monitoring the standby frequency for incoming transmissions.This is particularly useful when preparing for a frequency change or monitoring another relevant radio channel.Integrated 4-Place IntercomThe AR6213 features an integrated VOX-controlled 4-place intercom.The system supports two separate intercom circuits and provides separate Push-to-Talk functions for pilot and co-pilot.In many installations, this can eliminate the need for an additional standalone intercom system.The integrated intercom can be adapted to different cockpit, microphone and headset configurations.AUX Audio InputAn integrated AUX audio input allows additional audio signals to be connected to the system.This can be used, for example, to reproduce audio warnings or signals from other avionics equipment through the connected headsets.Powerful Loudspeaker OutputIn addition to the headphone outputs, the AR6213 provides an integrated output for an external cockpit loudspeaker.Output power is at least 4 W into 4 ohms.With a suitable installation, the radio can therefore drive an appropriate cockpit loudspeaker without requiring an additional external audio amplifier.Frequency ManagementThe Becker 6200 Series automatically stores recently used channels, allowing previously selected frequencies to be recalled quickly.The unit also provides an RF signal indication, giving the pilot an indication of received signal strength.Adjustable SquelchThe receiver squelch threshold can be adjusted.This allows the radio to be adapted to different reception conditions and aircraft installations.Safe-Lock FunctionThe Becker 6200 Series features a Safe-Lock function designed to help prevent accidental changes to selected settings.This can be particularly useful during turbulence or if the controls are touched unintentionally.Tandem Operation and Remote ExpansionAlthough the AR6213 already features an integrated control panel, the Becker 6200 Series also supports additional control options.Depending on the installation, a compatible RCU6211 Remote Control Unit can be added.This enables configurations with multiple control positions and can be particularly useful for tandem cockpits, training aircraft and specialized aircraft installations.Wide Supply Voltage RangeThe AR6213 operates with a supply voltage of 10.25 to 33 V DC.It can therefore be installed in both typical 12/14 V and 24/28 V aircraft electrical systems.For limited emergency operation, a voltage range of 9.0 to 10.25 V DC is specified.Robust DesignThe Becker Avionics 6200 Series was developed for professional aviation applications.The radio requires no forced-air cooling and no additional cooling fan, eliminating additional moving components and potential noise sources.Its robust design is intended to provide high reliability and long service life.Features:Professional VHF/AM aviation transceiverSingle-block transceiver with integrated control panel160 mm / 6.25-inch avionics stack formatBecker Avionics 6200 SeriesDesign Assurance Level C (DAL C)8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.990 MHzUp to 2,280 channels with 8.33 kHz spacing760 channels with 25 kHz spacing6 W RF transmitter output6 W version at both 14 V and 28 VModern DSP technologyDual Watch / SCAN ModeSimultaneous monitoring of a second frequencyIntegrated VOX-controlled intercom4-place intercomTwo separate intercom circuitsSeparate PTT functions for pilot and co-pilotAUX audio inputIntegrated loudspeaker outputAt least 4 W loudspeaker output into 4 ohmsAutomatic storage of recently used frequenciesRF signal indicationAdjustable squelch thresholdSafe-Lock function to prevent accidental changesExpandable with an additional control unitTandem operation possibleWide supply voltage rangeSuitable for 12/14 V and 24/28 V aircraft electrical systemsNo forced-air cooling requiredNo cooling fanETSO/TSO certifiedFCC approvedTechnical Specifications:Model: Becker Avionics AR6213Version: 6 WDevice type: VHF/AM Aviation TransceiverConfiguration: Single Block / Stack MountDesign Assurance Level: DAL CFrequency range: 118.000 – 136.990 MHzChannel spacing: 8.33 kHz / 25 kHzChannels at 25 kHz: 760Channels at 8.33 kHz: 2,280RF transmitter output: ≥ 6 W into 50 ohmsRF transmitter output at 14 V: ≥ 6 WRF transmitter output at 28 V: ≥ 6 WSupply voltage: 10.25 – 33 V DCEmergency operating voltage: 9.0 – 10.25 V DCCurrent consumption, receive / standby at 12 V: ≤ 140 mACurrent consumption, transmit at 12 V: < 2 ADual Watch: YesIntercom: Integrated / VOX controlledIntercom positions: Up to 4Intercom circuits: 2AUX audio input: YesHeadphone output: ≥ 300 mW into 150 ohms / ≥ 100 mW into 600 ohmsLoudspeaker output: ≥ 4 W into 4 ohmsSquelch: AdjustableMaximum operating altitude: 35,000 ftOperating temperature: -20 °C to +55 °CShort-time operating temperature: up to +70 °CStorage temperature: -55 °C to +85 °CWeight: approx. 800 gInstallation Format:The AR6213 is designed as a 160 mm / 6.25-inch stack-mounted unit with an integrated control panel.Unlike the AR6211 in the classic 58 mm / 2¼-inch round instrument format, the AR6213 is designed for installation in a horizontal avionics stack.The single-block design combines the transceiver and control panel in one unit.Approvals / Standards:ETSO-C37eETSO-C38eTSO-C169aFCC approvedEASA Approval: EASA.21O.10075461Design Assurance Level: DAL CDual Watch / SCAN Mode:The integrated Dual Watch function allows a second frequency to be monitored while the active frequency remains available for communication.This makes it possible, for example, to monitor the next required frequency before changing over from the currently active channel.Integrated 4-Place Intercom:The AR6213 features an integrated VOX-controlled 4-place intercom with two separate intercom circuits.Separate PTT functions for pilot and co-pilot allow flexible integration into different cockpit and headset configurations.6 W Version:This product is the 6 W version of the Becker AR6213.Transmitter output is at least 6 W at both 14 V and 28 V supply voltage.For installations requiring higher transmitter output with a 28 V electrical system, the AR6213 is also available in a version providing at least 10 W at 28 V.Installation:The AR6213 is a complete single-block transceiver with an integrated control panel. Therefore, no separate Remote Control Unit is required for normal operation.The wide 10.25 to 33 V DC supply voltage range allows installation in different aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:Becker Avionics AR6213 VHF Aviation Transceiver, 6 W versionConnector kit, mounting frame, wiring harness and additional installation accessories according to the scope of delivery specified for the respective product.The Becker Avionics AR6213, 6 W is a professional solution for pilots, aircraft owners and avionics specialists looking for a high-performance 8.33 kHz aviation transceiver in a conventional stack format with DAL C design assurance.With 6 W transmitter output, Dual Watch, an integrated 4-place intercom, two separate intercom circuits, AUX audio input and a wide supply voltage range, the AR6213 provides comprehensive communication and audio functionality for demanding General Aviation and professional avionics installations.
Average rating of 0 out of 5 stars
The Becker Avionics AR6213, 10 W is a professional VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing in the classic 160 mm / 6.25-inch avionics stack format. As part of the proven Becker Avionics 6200 Series, the AR6213 combines modern digital signal processing, high transmitter output, Dual Watch, integrated intercom and comprehensive audio functions with a high level of certification.The AR6213 series features Design Assurance Level C (DAL C), making it particularly suitable for demanding and certified avionics installations.Unlike the remote transceivers of the RT62xx series, the AR6213 is designed as a single-block transceiver with an integrated control panel. The radio and control unit are housed in a single device, so no separate Remote Control Unit is required for normal operation.8.33 kHz and 25 kHz Channel SpacingThe AR6213 supports both modern 8.33 kHz and conventional 25 kHz channel spacing.The frequency range extends from 118.000 to 136.990 MHz.Up to 760 channels are available with 25 kHz spacing, while up to 2,280 channels can be used with 8.33 kHz spacing.The radio therefore meets the requirements for European 8.33 kHz aviation communication.Up to 10 W Transmitter OutputThis model is the higher-power 10 W version of the AR6213.RF transmitter output is:at least 6 W with a 14 V aircraft electrical systemat least 10 W with a 28 V aircraft electrical systemThe AR6213 therefore provides particularly high transmitter output in aircraft equipped with 24/28 V electrical systems.When operated from a 12/14 V aircraft electrical system, transmitter output is at least 6 W.Modern Digital Signal ProcessingThe Becker Avionics 6200 Series uses modern Digital Signal Processing (DSP) technology.The high level of digital integration provides efficient signal processing while maintaining compact dimensions and low weight.The system is designed to provide reliable and intelligible radio communication under typical aviation operating conditions.Dual Watch / SCAN ModeThe AR6213 features Becker's Dual Watch function, also referred to as SCAN Mode.This allows a second frequency to be monitored in addition to the active frequency.For example, the pilot can communicate on the active frequency while simultaneously monitoring the standby frequency for incoming transmissions.This is particularly useful when preparing for a frequency change or monitoring another relevant radio channel.Integrated IntercomThe AR6213 features an integrated VOX-controlled intercom and provides comprehensive options for integration into different cockpit, headset and audio configurations.In many installations, this can eliminate the need for an additional standalone intercom system.The intercom and audio functions can be configured to suit the respective aircraft and headset installation.AUX Audio InputThe integrated AUX audio input allows additional audio signals to be connected to the system.This can be used, for example, to reproduce audio warnings or signals from other avionics equipment through the connected headsets.Powerful Loudspeaker OutputIn addition to the headphone outputs, the AR6213 provides an output for an external cockpit loudspeaker.Output power is at least 4 W into 4 ohms.With a suitable installation, the radio can therefore directly drive an appropriate cockpit loudspeaker.Frequency ManagementThe Becker 6200 Series automatically stores recently used channels.This allows previously used frequencies to be recalled quickly without having to enter them again.The radio also features an RF signal indication, providing information about the strength of the received signal.Adjustable SquelchThe receiver squelch threshold can be individually adjusted.This allows the radio to be adapted to different reception conditions and aircraft installations.Safe-Lock FunctionThe Becker 6200 Series features a Safe-Lock function.This function helps prevent accidental changes to selected settings, for example if the controls are touched unintentionally or during turbulent flight conditions.Tandem Operation and Additional Control UnitAlthough the AR6213 already features an integrated control panel, the Becker 6200 Series can be expanded with additional control options depending on the installation.A compatible Becker RCU6211 Remote Control Unit can be used for suitable installations.This enables additional control positions and can be particularly useful for tandem cockpits, training aircraft and specialized aircraft configurations.Wide Supply Voltage RangeThe AR6213 operates with a supply voltage of 10.25 to 33 V DC.It can therefore be installed in both typical 12/14 V and 24/28 V aircraft electrical systems.For limited emergency operation, an additional voltage range of 9.0 to 10.25 V DC is specified.Robust DesignThe Becker Avionics 6200 Series was developed for professional aviation applications.The unit requires no forced-air cooling and no additional cooling fan, eliminating additional moving components and potential noise sources.Its robust design is intended to provide high reliability and long service life.Features:Professional VHF/AM aviation transceiverSingle-block transceiver with integrated control panel160 mm / 6.25-inch avionics stack formatBecker Avionics 6200 SeriesDesign Assurance Level C (DAL C)8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.990 MHzUp to 2,280 channels with 8.33 kHz spacing760 channels with 25 kHz spacingAt least 6 W RF transmitter output at 14 VAt least 10 W RF transmitter output at 28 VModern DSP technologyDual Watch / SCAN ModeSimultaneous monitoring of a second frequencyIntegrated VOX-controlled intercomComprehensive audio functionsAUX audio inputHeadphone outputsIntegrated loudspeaker outputAt least 4 W loudspeaker output into 4 ohmsAutomatic storage of recently used frequenciesRF signal indicationAdjustable squelch thresholdSafe-Lock function to help prevent accidental changesExpandable with an additional control unitTandem operation possibleWide supply voltage rangeSuitable for 12/14 V and 24/28 V aircraft electrical systemsNo forced-air cooling requiredNo cooling fanETSO/TSO certifiedFCC approvedTechnical Specifications:Model: Becker Avionics AR6213Version: 10 WDevice type: VHF/AM Aviation TransceiverConfiguration: Single Block / Stack MountDesign Assurance Level: DAL CFrequency range: 118.000 – 136.990 MHzChannel spacing: 8.33 kHz / 25 kHzChannels at 25 kHz: 760Channels at 8.33 kHz: 2,280RF transmitter output at 14 V: ≥ 6 WRF transmitter output at 28 V: ≥ 10 WSupply voltage: 10.25 – 33 V DCEmergency operating voltage: 9.0 – 10.25 V DCCurrent consumption, receive / standby at 12 V: ≤ 140 mACurrent consumption, transmit at 12 V: < 2 ADual Watch: YesIntercom: Integrated / VOX controlledAUX audio input: YesHeadphone output: ≥ 300 mW into 150 ohms / ≥ 100 mW into 600 ohmsLoudspeaker output: ≥ 4 W into 4 ohmsSquelch: AdjustableMaximum operating altitude: 35,000 ftOperating temperature: -20 °C to +55 °CShort-time operating temperature: up to +70 °CStorage temperature: -55 °C to +85 °CWeight: approx. 800 gDimensions / Installation Format:The AR6213 is designed as a 160 mm / 6.25-inch stack-mounted unit with an integrated control panel.The single-block concept combines the transceiver and control unit in one device.Therefore, no separate control head is required for normal operation.Approvals / Standards:ETSO-C37eETSO-C38eTSO-C169aFCC approvedEASA Approval: EASA.21O.10075461Design Assurance Level: DAL CDual Watch / SCAN Mode:The integrated Dual Watch function allows a second frequency to be monitored while the active frequency remains available for communication.This makes it possible, for example, to monitor the next required frequency before changing over from the currently active channel.Integrated Intercom:The AR6213 features an integrated VOX-controlled intercom.The integrated solution provides flexible adaptation to different cockpit and headset configurations and, depending on the installation, can replace an additional standalone intercom system.10 W Version:This product is the higher-power 10 W version of the Becker AR6213.Transmitter output is at least 6 W with a 14 V supply voltage and at least 10 W with a 28 V supply voltage.The full 10 W transmitter output is therefore available when the radio is operated from a 28 V aircraft electrical system.For aircraft with a 12/14 V electrical system, transmitter output is at least 6 W.Installation:The AR6213 is a complete single-block transceiver with an integrated control panel. Therefore, no separate Remote Control Unit is required for normal operation.The wide 10.25 to 33 V DC supply voltage range allows installation in both 12/14 V and 24/28 V aircraft electrical systems.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:Becker Avionics AR6213 VHF Aviation Transceiver, 10 W versionConnector kitMounting frameAdditional wiring and installation accessories are available separately unless explicitly stated otherwise.The Becker Avionics AR6213, 10 W is a professional solution for pilots, aircraft owners and avionics specialists looking for a powerful, certified and flexibly integrated 8.33 kHz aviation transceiver in a conventional stack format.With up to 10 W transmitter output at 28 V, Dual Watch, integrated intercom, comprehensive audio functions, DAL C design assurance and a wide supply voltage range, the AR6213 is particularly suitable for demanding General Aviation and professional avionics installations.
Average rating of 0 out of 5 stars
The Becker Avionics AR6211 is an exceptionally compact and professional VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, designed for installation in a standard 58 mm / 2¼-inch round instrument cutout. As the successor to the proven AR6201, the AR6211 combines the compact design of the Becker 6200 Series with modern DSP technology, Dual Watch, an integrated intercom and the higher Design Assurance Level C (DAL C).The unit is designed as a single-block transceiver. Radio, display and controls are integrated into one housing, so no separate control unit is required for normal operation.8.33 kHz and 25 kHz Channel SpacingThe AR6211 supports both 8.33 kHz and 25 kHz channel spacing throughout the frequency range from 118.000 to 136.990 MHz.It provides 760 channels in 25 kHz mode and up to 2,280 channels in 8.33 kHz mode.Powerful VHF TransceiverThe AR6211 provides a powerful VHF aviation communication solution for compact instrument panels.The 621X series was developed as an evolution of the proven Becker 6200 Series and features Design Assurance Level C (DAL C).Modern DSP TechnologyModern Digital Signal Processing (DSP) provides extensive functionality while maintaining compact dimensions.Dual Watch / SCAN ModeA particularly useful feature is Dual Watch / SCAN Mode.This allows a second frequency to be monitored while the active frequency remains available for communication.For example, the pilot can monitor the next required frequency while continuing to communicate on the currently active frequency.Integrated IntercomThe AR6211 features an integrated VOX-controlled intercom.Depending on the aircraft installation, the radio can therefore also handle cockpit communication and reduce the need for a separate intercom system.AUX Audio InputAn AUX audio input allows external audio signals to be integrated into the cockpit audio system.For example, warning signals from other compatible avionics equipment can be reproduced through the connected headsets.Powerful Loudspeaker OutputThe integrated loudspeaker output provides at least 4 W into 4 ohms.With an appropriate installation, a suitable cockpit loudspeaker can therefore be driven directly.Adjustable SquelchThe squelch threshold can be adjusted according to the respective operating conditions.Compact 58 mm FormatA major advantage of the AR6211 is its compact design.With front dimensions of approximately 61 × 61 mm, it fits into a standard 58 mm / 2¼-inch round instrument cutout.This makes the AR6211 particularly suitable for aircraft where instrument panel space is limited.Only Approx. 675 gWeighing only approximately 675 g, the AR6211 is also attractive for aircraft where weight is an important consideration.Wide Supply Voltage RangeThe supply voltage range is 10.25 to 33 V DC.This allows the radio to be used in both typical 12/14 V and 24/28 V aircraft electrical systems.Tandem and Remote OperationThe AR6211 already features a fully integrated control panel and does not require a separate control unit for normal operation.For suitable installations, however, a compatible Becker Avionics RCU6211 Remote Control Unit can be added.This allows an additional control position to be provided, for example in gliders, motor gliders, training aircraft and other aircraft with tandem cockpit configurations.Features:Professional VHF/AM aviation transceiverSuccessor to the Becker AR6201Becker Avionics 6200 SeriesDesign Assurance Level C (DAL C)Single-block transceiverCompact 58 mm / 2¼-inch format8.33 kHz and 25 kHz channel spacingFrequency range: 118.000 – 136.990 MHz760 channels at 25 kHzUp to 2,280 channels at 8.33 kHzModern DSP technologyDual Watch / SCAN ModeSimultaneous monitoring of a second frequencyIntegrated VOX intercomAUX audio inputHeadphone outputsAt least 4 W loudspeaker output into 4 ohmsAdjustable squelchIntegrated diagnostic functionsIlluminated displayWide supply voltage rangeSuitable for 12/14 V and 24/28 V aircraft electrical systemsOptional additional RCU6211 control unitSuitable for tandem configurationsWeight only approx. 675 gETSO/TSO certifiedFCC approvedTechnical Specifications:Model: Becker Avionics AR6211Device type: VHF/AM Aviation TransceiverConfiguration: Single Block / 2¼-inch Round InstrumentDesign Assurance Level: DAL CFrequency range: 118.000 – 136.990 MHzChannel spacing: 8.33 / 25 kHzChannels at 25 kHz: 760Channels at 8.33 kHz: 2,280Supply voltage: 10.25 – 33 V DCEmergency voltage: 9.0 – 10.25 V DCDual Watch: YesIntercom: IntegratedAUX audio input: YesHeadphone output: ≥ 300 mW into 150 ohms / ≥ 100 mW into 600 ohmsLoudspeaker output: ≥ 4 W into 4 ohmsSquelch: AdjustableMaximum operating altitude: 35,000 ftOperating temperature: -20 °C to +55 °CShort-time operation: up to +70 °CStorage temperature: -55 °C to +85 °CFront dimensions: approx. 61 × 61 mmInstallation format: 58 mm / 2¼ inchWeight: approx. 675 gApprovals / Standards:ETSO-C37eETSO-C38eTSO-C169aFCC approvedDesign Assurance Level: DAL CScope of Delivery:Becker Avionics AR6211 VHF Aviation TransceiverConnector kitAdditional installation and wiring accessories are available separately unless explicitly stated otherwise.The Becker Avionics AR6211 is an excellent choice for pilots and aircraft owners looking for a professional and certified 8.33 kHz aviation transceiver in the compact 58 mm / 2¼-inch format.With DAL C, Dual Watch, integrated intercom, modern DSP technology, a wide supply voltage range and a weight of only approximately 675 g, the AR6211 combines professional Becker avionics technology with minimal instrument panel space requirements.
Average rating of 0 out of 5 stars
The Becker Avionics RT6211, 6 W is a professional remotely installed VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing, designed for demanding and certified avionics installations. As the successor to the proven RT6201, the RT6211 combines compact dimensions, low weight and modern digital signal processing with comprehensive communication and audio functions.The RT6211 series features Design Assurance Level C (DAL C), meeting higher development and certification requirements than the previous RT6201 series with DAL D.Unlike a conventional panel-mounted aviation radio, the RT6211 has no integrated control panel. The radio module is installed at a suitable location within the aircraft and operated via a separate control unit, such as the Becker Avionics RCU6211.This remote concept provides exceptional installation flexibility and is particularly suitable for cockpits with limited instrument panel space or applications where the transceiver needs to be positioned independently of the control unit.DAL C – For Demanding Avionics InstallationsAn important feature of the RT6211 is its Design Assurance Level C (DAL C).Compared with the previous RT6201 with DAL D, the RT6211 series meets more stringent development and verification requirements.This makes the RT6211 particularly suitable for demanding certified avionics installations and professional aviation applications.8.33 kHz and 25 kHz Channel SpacingThe RT6211 supports both modern 8.33 kHz and conventional 25 kHz channel spacing.The complete VHF aviation communication band is covered.Up to 760 channels are available with 25 kHz spacing, while up to 2,280 channels can be used with 8.33 kHz spacing.The radio therefore meets the requirements for European 8.33 kHz aviation communication.6 W Transmitter OutputThis model is the 6 W version RT6211-(020).RF transmitter output is:at least 6 W with a 14 V aircraft electrical systemat least 6 W with a 28 V aircraft electrical systemThe full specified 6 W transmitter output is therefore available in both typical 12/14 V and 24/28 V installations.For applications requiring higher transmitter output, the RT6211 is also available in a version providing up to 10 W at 28 V.Modern Digital Signal ProcessingThe Becker Avionics 6200 Series uses modern Digital Signal Processing (DSP) technology.The high level of digital integration provides efficient signal processing while maintaining compact dimensions and low weight.The system is designed to provide reliable and intelligible radio communication under typical aviation operating conditions.Dual Watch / SCAN ModeThe RT6211 supports Becker's Dual Watch function, also referred to as SCAN Mode.This allows a second frequency to be monitored in addition to the active frequency.For example, the pilot can communicate on the active frequency while simultaneously monitoring the standby frequency for incoming transmissions.This is particularly useful when preparing for a frequency change or monitoring another relevant radio channel.Integrated 4-Place IntercomThe 6 W version of the RT6211 features an integrated 4-place intercom.The system supports two separate intercom circuits and provides comprehensive integration options for different headset and cockpit configurations.In many installations, this can eliminate the need for an additional standalone intercom system.AUX Audio InputThe integrated AUX audio input allows additional audio signals to be connected to the system.This can be used, for example, to reproduce audio warnings or signals from other avionics equipment through the connected headsets.Powerful Loudspeaker OutputIn addition to the headphone outputs, the Becker 6200 Series provides an output for an external cockpit loudspeaker.Output power is at least 4 W into 4 ohms.With a suitable installation, the radio can therefore directly drive an appropriate cockpit loudspeaker.Remote InstallationThe RT6211 was specifically designed for remote installation.The transceiver module can be mounted independently of the instrument panel at a suitable location within the aircraft.Operation is provided through a separate control unit.A typical installation consists of:Becker Avionics RT6211 Remote TransceiverBecker Avionics RCU6211 Remote Control UnitThe RCU6211 is designed for installation in a standard 58 mm / 2¼-inch instrument cutout and requires very little instrument panel space.Separating the radio module from the control unit allows the available installation space to be used particularly efficiently.Tandem OperationThe Becker 6200 Series also supports tandem configurations.This is particularly useful for gliders, motor gliders, training aircraft and other aircraft with tandem seating arrangements.Depending on the installation, additional control positions can be provided, allowing the radio to be operated from different cockpit positions.Wide Supply Voltage RangeThe RT6211 operates over a wide supply voltage range, making it suitable for both typical 12/14 V and 24/28 V aircraft electrical systems.A lower voltage range is also provided for limited emergency operation.Compact and LightweightA major advantage of the remote concept is the compact design of the transceiver module itself.The RT6211 weighs only approximately 600 g.With mounting frame, the radio module measures approximately:Width: 67 mmHeight: 40 mmLength: 188 mmThis allows the unit to be installed flexibly at a suitable location within the aircraft.Robust DesignThe Becker Avionics 6200 Series was developed for professional aviation applications.The remote radio module is designed for an extended operating temperature range, making it suitable for installation locations outside the immediately heated cockpit area.Its robust construction is intended to provide high reliability and long service life.Features:Professional VHF/AM aviation transceiverRemote transceiver for flexible installationSuccessor to the proven RT6201Becker Avionics 6200 SeriesDesign Assurance Level C (DAL C)8.33 kHz and 25 kHz channel spacingUp to 2,280 channels with 8.33 kHz spacing760 channels with 25 kHz spacing6 W RF transmitter outputAt least 6 W at 14 VAt least 6 W at 28 VModern DSP technologyDual Watch / SCAN ModeSimultaneous monitoring of a second frequencyIntegrated intercom4-place intercomTwo separate intercom circuitsAUX audio inputHeadphone outputsIntegrated loudspeaker outputAt least 4 W loudspeaker output into 4 ohmsAdjustable squelchRemote operation via RCU6211Flexible positioning of the transceiver moduleTandem configurations possibleSuitable for 12/14 V and 24/28 V aircraft electrical systemsWeight only approx. 600 gRobust constructionExtended operating temperature range for the remote unitETSO/TSO certifiedFCC approvedTechnical Specifications:Model: Becker Avionics RT6211Version: RT6211-(020)Output version: 6 WDevice type: Remote VHF/AM Aviation TransceiverDesign Assurance Level: DAL CChannel spacing: 8.33 kHz / 25 kHzChannels at 25 kHz: 760Channels at 8.33 kHz: 2,280RF transmitter output at 14 V: ≥ 6 WRF transmitter output at 28 V: ≥ 6 WSupply voltage: 10.25 – 33 V DCEmergency operating voltage: 9.0 – 10.25 V DCCurrent consumption, receive / standby at 12 V: ≤ 140 mACurrent consumption, transmit at 12 V: < 2 ADual Watch: YesIntercom: IntegratedIntercom positions: Up to 4Intercom circuits: 2AUX audio input: YesHeadphone output: ≥ 300 mW into 150 ohms / ≥ 100 mW into 600 ohmsLoudspeaker output: ≥ 4 W into 4 ohmsSquelch: AdjustableMaximum operating altitude: 35,000 ftOperating temperature, remote unit: -40 °C to +55 °CShort-time operating temperature: up to +70 °CStorage temperature: -55 °C to +85 °CWeight: approx. 600 gDimensions:RT6211 Remote Transceiver with mounting frame:Width: approx. 67 mmHeight: approx. 40 mmLength: approx. 188 mmThe compact radio module can be installed separately from the control unit at a suitable location within the aircraft.Approvals / Standards:ETSO-2C37eETSO-2C38eTSO-C169aFCC approvedEASA Approval: EASA.21O.10075461Design Assurance Level: DAL CDual Watch / SCAN Mode:The integrated Dual Watch function allows a second frequency to be monitored while the active frequency remains available for communication.This makes it possible, for example, to monitor the next required radio frequency before changing over from the currently active channel.Integrated Intercom:The 6 W version of the RT6211 provides an integrated 4-place intercom with two separate intercom circuits.This allows the system to be adapted flexibly to different cockpit, headset and crew configurations.6 W Version:This product is the 6 W version of the Becker Avionics RT6211.Transmitter output is at least 6 W at both 14 V and 28 V supply voltage.For installations requiring higher transmitter output with a 28 V electrical system, the RT6211 is also available in a 10 W version.Installation and Operation:The RT6211 is a remote transceiver without an integrated control panel.A compatible separate control unit is required for operation, such as the Becker Avionics RCU6211.The RCU6211 features an illuminated display and supports both 8.33 kHz and 25 kHz channel spacing. Its compact 58 mm / 2¼-inch format requires very little instrument panel space.The RT6211 transceiver module itself can be mounted independently at a suitable location within the aircraft.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Scope of Delivery:Becker Avionics RT6211 Remote VHF Transceiver, 6 W versionConnector kitMounting frameThe RCU6211 control unit is not included and must be ordered separately.Additional wiring and installation accessories are available separately unless explicitly stated otherwise.The Becker Avionics RT6211, 6 W is a professional solution for pilots, aircraft owners and avionics specialists looking for a compact, certified and flexibly installable 8.33 kHz remote aviation communication system with DAL C design assurance.With 6 W transmitter output at both 14 V and 28 V, Dual Watch, an integrated 4-place intercom, comprehensive audio functions and a weight of only approximately 600 g, the RT6211 is particularly suitable for demanding avionics installations where flexibility, low weight and professional certification are key requirements.