Filter products
- Aviation Charts
- Headsets
- Avionics
- Pilot Training & books
- Pilot Equipment
- Aviation Equipment
- Airport Equipment
- Helmets
- SALE & Promotions
Powersupply and accessories
Average rating of 0 out of 5 stars
Jumper Cable with standard 3-pin Lexan female plug (equivalent to AN 2551) on one end and alligator clamps on other end.Cable is heavy duty copper, approx. 4,6 m long, twin extruded to help prevent tangling. Fully insulated clamps will not arc or spark and are rated 500 A, have a solid copper jaw, and have a flexispring strain relief to prevent cable breakage. Polarity light warns if clamps are connected incorrectly, preventing electrical system damage and personal injury.
Average rating of 0 out of 5 stars
Jumper Cable with Piper single-pin plug on one end and alligator clamps on other end.Cable is heavy duty copper, approx. 4,6 m long, twin extruded to help prevent tangling. Fully insulated clamps will not arc or spark and are rated 500 A, have a solid copper jaw, and have a flexispring strain relief to prevent cable breakage. Polarity light warns if clamps are connected incorrectly, preventing electrical system damage and personal injury.
Average rating of 0 out of 5 stars
Average rating of 0 out of 5 stars
Piper Standard Plug for external use
Average rating of 0 out of 5 stars
Attaches to any rigid location on aircraft. Single pole, self-grounding. Brass male contact has insulated tip to prevent short circuits. Brass female terminal for solder connection of cable. Spring loaded flap closes flush with aircraft skin, protecting connection from weather.
Average rating of 0 out of 5 stars
The XS 0.8 is a compact and fully automatic 6-step charger for 12 V batteries from 1.2 - 32 Ah and for maintenance charging up to 100 Ah. These can be charged when connected, without causing damage to the bord electronics system. Fully automatic IUoUp curve with pulse charge (reviving of a dead battery).The following batteries can be connected: Open, Maintenance Free, AGM, GEL and lead calcium. Voltage: 170 - 260 V AC, 50 - 60 HzCharging voltage: 14.4 V, rated at 12V, Max charging current: 0.8 ACharger type: 6-stepBattery Capacity: 1.2 to 32 Ah (loading); 1.2 to 100 Ah (Received)Dimensions: 142 x 51 x 36 mmWeight: 0.3 kg With storage bag.
Average rating of 0 out of 5 stars
Sensing and control toogle switch2 pole, 2 positions, screw terminal0,5 A, 14 V and 28 V
Average rating of 0 out of 5 stars
Diese Powerbank mit Kompressor dient der zusätzlichen Unterstützung von 12-V-Fahrzeugbatterie-Systemen bei Startproblemen an Diesel- (bis max. 2,2 l Hubraum) und Benzin-Fahrzeugmotoren (bis max. 3,5 l Hubraum), welche durch schwache, leere oder defekte Starterbatterien verursacht sind. Der leistungsstarke Li-Ionen-Akku ermöglicht dem Anwender im Bedarfsfall, das Fahrzeug ohne Hilfe von dritter Seite zu starten und macht ihn somit flexibel und unabhängig. Zusätzlich verfügt die Powerbank mit Kompressor über eine Ladezustandsanzeige und zwei USB-Ausgänge, über die Mobiltelefone, Navigationsgeräte oder andere USB-Anschlussgeräte geladen werden können. Der integrierte Kompressor, ausgestattet mit einer komfortablen Druckauswahlfunktion und drei verschiedenen Adaptern, ist zum Erzeugen von Druck in Reifen, Bällen und sonstigen kleinvolumigen Aufblasartikeln bestimmt. Für die nötige Sicherheit ist ebenfalls durch Schutz gegen Verpolung, Kurzschluss, Überladung und Überhitzung gesorgt, sowie einer Schutzschaltung, zur Erkennung von defekten oder tiefentladenen Kfz-Batterien, zum maximalen Schutz der Elektronik und des Anwenders.
Average rating of 0 out of 5 stars
Der leistungsstarke Akku-Kompressor, im handlichen Design, ist immer und überall einsatzbereit. Er verfügt über einen starken Li-Ion Akku in FePO4-Bauweise mit 4 x 500 mAh. Autoreifen, Fahrradreifen oder Freizeitartikel sind für ihn ein Kinderspiel. Dank des Staufachs im Inneren des Gerätes haben Sie den Druckluftschlauch und die 4 Adapter immer griffbereit. Die intergrierte Taschenlampe ermöglicht es Ihnen, auch bei schlechter Sicht mit dem Kompressor zu arbeiten. Über das beleuchtete LC-Display mit Manometer haben Sie zudem die Möglichkeit, den Akkuladezustand sowie den Akkuladevorgang zu kontrollieren. Den Li-Ion-Akku können Sie entweder über das im Lieferumfang enthaltene 12-V-Ladekabel am Zigarettenanzünder Ihres Fahrzeuges aufladen, oder über das ebenfalls enthaltene Netzkabel. Des Weiteren haben Sie die Möglichkeit, den benötigten Luftdruck im Vorfeld einzustellen, da der Kompressor über eine automatische Abschaltvorrichtung verfügt.