Filter products
TQ
Average rating of 0 out of 5 stars
With connectors, length 2,9 m.
Average rating of 0 out of 5 stars
Connector ST1 for Dittel Avionik KRT2
Average rating of 0 out of 5 stars
Estimated delivery date approx. late AugustThe TQ KRT2-S is an exceptionally compact and lightweight VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing for permanent installation in aircraft. Weighing only approximately 360 g, with an installation depth of just 144 mm and a standard 57 mm / 2¼-inch round instrument format, the KRT2-S is particularly suitable for installations where low weight and compact dimensions are important.The KRT2-S covers the complete VHF aviation communication band and supports both 8.33 kHz and 25 kHz channel spacing. A total of 2,278 channels are available in combined 8.33/25 kHz operation.With an RF transmitter output power of 6 watts, the KRT2-S provides powerful and reliable communication for a wide range of aircraft – from gliders and motor gliders to ultralight and powered aircraft.A particularly useful feature of the KRT2-S is its integrated Dual Watch function. This allows two different frequencies to be monitored simultaneously. The two frequencies are acoustically differentiated, helping the pilot identify which frequency a received transmission originates from.The high-resolution TFT colour display has been specifically designed for cockpit use and provides excellent readability even in bright ambient light. Active and standby frequencies as well as other relevant information are clearly displayed.For frequently used frequencies, the KRT2-S provides 100 freely programmable memory locations. Each stored frequency can be assigned an individual name of up to 8 characters, allowing airport, FIS and other frequently used frequencies to be quickly identified and recalled.The KRT2-S also features an integrated intercom. Two microphone inputs allow the connection of standard or dynamic microphones. In many installations, this eliminates the need for a separate intercom system.An additional audio input allows external audio sources to be integrated into the aircraft audio system.The largely digital electronics provide high frequency stability and reliable communication while maintaining low power consumption.An additional safety feature protects against accidental continuous transmission. If the Push-to-Talk button remains activated, the transmitter automatically switches off after two minutes to prevent the radio frequency from being continuously blocked.The wide 9 to 33 V DC supply voltage range allows operation with both typical 12 V and 24 V aircraft electrical systems.The KRT2-S can also be combined with the separately available KRT2 Remote Control Unit. This provides a second control position and is particularly useful for aircraft with tandem seating, allowing the radio to be operated from both cockpit positions.Adapter solutions are also available for various older aviation radios. Depending on the existing installation, these can simplify the replacement of an existing transceiver.Features:VHF/AM aviation transceiverDesigned for permanent aircraft installation8.33 kHz and 25 kHz channel spacing2,278 channels in combined 8.33/25 kHz operation6 W RF transmitter output powerDual Watch functionSimultaneous monitoring of two frequenciesAcoustic differentiation of the two monitored frequenciesHigh-resolution TFT colour displayExcellent readability in bright ambient light100 freely programmable frequency memoriesMemory locations with names of up to 8 charactersIntegrated intercom2 microphone inputsStandard and dynamic microphones supportedAudio input for external audio sourcesHigh frequency stability thanks to largely digital electronicsAutomatic transmitter shut-off after 2 minutes of continuous transmissionRemote control via optional KRT2 Remote Control UnitIdeal for tandem cockpits with optional second control unitWide 9 – 33 V DC supply voltage rangeSuitable for 12 V and 24 V aircraft electrical systemsCompact 57 mm / 2¼-inch installation formatLow installation depthWeight only approx. 360 gETSO/TSO certifiedTechnical Specifications:Model: TQ KRT2-SDevice type: VHF/AM Aviation TransceiverDesign: Standard / Round InstrumentFrequency range: 117.975 – 137.000 MHzUsable aviation communication range: 118.000 – 136.975 MHzChannel spacing: 8.33 kHz / 25 kHzNumber of channels: 2,278RF transmitter output power: 6 WDual Watch: YesIntercom: IntegratedMicrophone inputs: 2Microphone types: Standard / DynamicAudio input: YesFrequency memories: 100Memory identification: Up to 8 charactersDisplay: TFT colour displaySupply voltage: 9 – 33 V DCInstallation format: 57 mm / 2¼ inchInstallation diameter: approx. 57 mmInstallation depth: approx. 144 mm without connectorWeight: approx. 360 gRemote control: Yes, via optional KRT2 Remote Control UnitSafety Functions:To prevent accidental continuous transmission and prolonged blocking of a radio frequency, the KRT2-S features an automatic transmission time limit.After 2 minutes of continuous transmission, the transmitter is automatically switched off.Remote Control:The KRT2-S can be expanded with the separately available KRT2 Remote Control Unit, providing a second operating position.This is particularly useful for gliders, motor gliders and other aircraft with tandem seating arrangements. The remote unit allows the radio to be controlled from a second cockpit position.Installation:The KRT2-S is designed for installation in a standard 57 mm / 2¼-inch instrument panel cutout.With an installation depth of only approximately 144 mm without connector and a weight of just 360 g, the unit is also well suited to cockpits with limited installation space.Electrical installation is carried out via the connector on the rear of the unit. A suitable wiring harness with open cable ends and additional installation components are available separately.Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.Approval:ETSO/TSO certifiedSupplied with EASA Form 1Scope of Delivery:TQ KRT2-S VHF Aviation TransceiverWiring harness and additional installation accessories are available separately unless explicitly stated otherwise.The TQ KRT2-S is an excellent choice for pilots and aircraft owners looking for a lightweight, compact and powerful 8.33 kHz aviation transceiver in the standard 57 mm format. With 6 W transmitter output power, Dual Watch, integrated intercom, 100 named frequency memories, TFT colour display and a weight of only approximately 360 g, the KRT2-S provides an extensive range of functions in an exceptionally compact package. Its low weight and small installation depth make it particularly attractive for gliders, motor gliders and ultralight aircraft.
Average rating of 0 out of 5 stars
The TQ-KRT2 radio remote control is suitable for all aircraft in tandem seating arrangement. In operation it is identical to the KRT2 radio. The display is also the same high-resolution TFT color display suitable for sunlight as the KRT2 radio unit. It weighs only 140g with an installation depth of only 31mm.Remote control KRT2 Radio TFT colour display suitable for sunlight super compact light minimal power consumption identical operation ETSO, TSO, FCC approval digital technology
Average rating of 0 out of 5 stars
Simple change of a Beckers 3201 to a KRT2-S. Recommendation exclusively for use in gliders. No fit for L- or P-format.
Average rating of 0 out of 5 stars
For the simple exchange of a Beckers 4201 to a KRT2-S. This is recommended exclusively for use in gliders. It does not fit L- or P-format.
Average rating of 0 out of 5 stars
For the simple exchange of a Funkwerk ATR500/600 to a KRT2-S. This is only recommended for use in gliders. It does not fit with L- or P-format.
Average rating of 0 out of 5 stars
The KBS1 open-ended cable set makes it easy to connect the KRT2 radio to headsets, power supplies, microphones, speakers, PTT and external audio connectors.
Average rating of 0 out of 5 stars
The TQ cable set KBS2 for powered aircraft makes it easy to connect the KRT2 radio to headsets, power supply, microphones, loudspeakers, PTT and external audio connections. Sockets for two headsets are already connected.
Average rating of 0 out of 5 stars
For the easy exchange of a Dittel FSG71/FSG 2T to a KRT2-S. This is only recommended for use in gliders. It does not fit L- or P-format gliders.
Average rating of 0 out of 5 stars
The Electret gooseneck microphone is optimally adapted to the KRT2 and with its slim and flexible design it is perfect for cockpits of all kinds.
Average rating of 0 out of 5 stars
Mounting Frame KRT2 to FSG40/50/60
Average rating of 0 out of 5 stars
For the easy change of a Filser ATR720 / Dittel FSG40/50/60 on a KRT2-S. This is only recommended for use in gliders. It does not fit L or P format.
Average rating of 0 out of 5 stars
Robustes Gehäuse und edles Design zeichnen diese neu entwickelte tragbare Funkstation aus. Ideal geeignet für den Betrieb als mobile Bodenstation, in Ballonen, usw.Reduzierte Gehäusegröße, geringes Gewicht, keine Kühlung erforderlich, keine Ventilationsöffnungen, wartungsfrei, benutzerfreundliche Bedienung, gut ablesbares TFT-Display, einfach erreichbare Bedienelemente am Frontpanel. Erhältlich in 2 Baugrößen.Lieferumfang: Funkgerät KRT2 und Transponder KTX2, Handmikrofon mit Lautsprecher, Ladegerät,Akku 7,2 Ah, flexible Federband-Stahlantenne. Maße: 238 x 88 x 220 mm.Zugelassen als Bodenfunkstelle ETSO-2C169a / TSO-C169a
Average rating of 0 out of 5 stars
The TQ-TB3 R portable radio station is one of the most modern portable radio stations on the market. Lowest weight, most compact dimensions, lowest power consumption are made possible by the highly digitized technology. Brilliant, sunlight-suitable TFT colour display, long operating time, the flexible steel band antenna and intuitive operation result in an unbeatable price-performance ratio. Ideal as a ground station at airports that are not subject to aerial surveillance (the latter applies to Germany, other countries please observe local regulations).TQ's most compact portable aviation radio station, with KRT2 8.33kHz radio, without installation option for additional transponder. Reduced housing size compared to known balloon stations Low weight Robust and proven housing design No cooling required No ventilation openings Maintenance-free Easy to read TFT colour display Easily accessible operating elements on the front panel of the housing