SF-10 harder, 100 g
Product information "SF-10 harder, 100 g"
For buffing lacquer T-35, for spraying use 10% hardener SF-10 and up to 10% SF thinner.
To obtain the best possible results when applying Buffing Lacquer T-35, it is recommended to use Hardener SF-10.
Technical data:
Pot life (without thinner addition):
20°C, about 30-45 min
Resilience:
20°C
adhesive-free after 2 - 4 hours
easily loadable after 5 - 6 hours
fully cured after 2 - 3 days
Gelling time:
20°C
approx. 100-150 min
Mixing ratio
Part by weight
100 : 10
Application temperature:
The optimum working temperature is 20-25°C. Lower temperatures cause a strong increase in viscosity and thus a more difficult processing. At higher temperatures, the pot life is reduced (at 30°C, for example, the pot life is reduced by half).
Storage instructions:
Storage between +10 to +20°C is recommended.
The relevant safety instructions for handling polyester resins and hardeners as well as instructions for safe processing must be observed!
Login