Becker Avionics Transceiver AR 6213, 6 W

The Becker Avionics AR6213, 6 W is a professional VHF/AM aviation transceiver with 8.33 kHz and 25 kHz channel spacing in the classic 160 mm / 6.25-inch avionics stack format. As part of the proven Becker Avionics 6200 Series, the AR6213 combines modern digital signal processing, an integrated intercom, Dual Watch and comprehensive audio functions with a high level of certification.

The AR6213 series features Design Assurance Level C (DAL C), making it particularly suitable for demanding and certified avionics installations.

Unlike the remote transceivers of the RT62xx series, the AR6213 is designed as a single-block transceiver with an integrated control panel. The radio and controls are housed in a single unit, so no separate Remote Control Unit is required for normal operation.

8.33 kHz and 25 kHz Channel Spacing

The AR6213 supports both modern 8.33 kHz and conventional 25 kHz channel spacing.

The frequency range extends from 118.000 to 136.990 MHz.

Up to 760 channels are available with 25 kHz spacing and up to 2,280 channels with 8.33 kHz spacing.

The radio therefore meets the requirements for European 8.33 kHz aviation communication.

6 W Transmitter Output

This model is the 6 W version of the AR6213.

RF transmitter output is at least 6 watts into 50 ohms.

Unlike the higher-power AR6213 version, which can provide at least 10 W at 28 V, this version remains a 6 W model in both 12/14 V and 24/28 V installations.

It is therefore suitable for both typical 12/14 V and 24/28 V aircraft electrical systems.

Modern Digital Signal Processing

The Becker Avionics 6200 Series uses modern Digital Signal Processing (DSP) technology.

The high level of digital integration provides efficient signal processing and reliable communication while helping to keep the unit compact and lightweight.

Dual Watch / SCAN Mode

The AR6213 features Becker's Dual Watch function, also referred to as SCAN Mode.

This allows a second frequency to be monitored in addition to the active frequency.

For example, the pilot can communicate on the active frequency while simultaneously monitoring the standby frequency for incoming transmissions.

This is particularly useful when preparing for a frequency change or monitoring another relevant radio channel.

Integrated 4-Place Intercom

The AR6213 features an integrated VOX-controlled 4-place intercom.

The system supports two separate intercom circuits and provides separate Push-to-Talk functions for pilot and co-pilot.

In many installations, this can eliminate the need for an additional standalone intercom system.

The integrated intercom can be adapted to different cockpit, microphone and headset configurations.

AUX Audio Input

An integrated AUX audio input allows additional audio signals to be connected to the system.

This can be used, for example, to reproduce audio warnings or signals from other avionics equipment through the connected headsets.

Powerful Loudspeaker Output

In addition to the headphone outputs, the AR6213 provides an integrated output for an external cockpit loudspeaker.

Output power is at least 4 W into 4 ohms.

With a suitable installation, the radio can therefore drive an appropriate cockpit loudspeaker without requiring an additional external audio amplifier.

Frequency Management

The Becker 6200 Series automatically stores recently used channels, allowing previously selected frequencies to be recalled quickly.

The unit also provides an RF signal indication, giving the pilot an indication of received signal strength.

Adjustable Squelch

The receiver squelch threshold can be adjusted.

This allows the radio to be adapted to different reception conditions and aircraft installations.

Safe-Lock Function

The Becker 6200 Series features a Safe-Lock function designed to help prevent accidental changes to selected settings.

This can be particularly useful during turbulence or if the controls are touched unintentionally.

Tandem Operation and Remote Expansion

Although the AR6213 already features an integrated control panel, the Becker 6200 Series also supports additional control options.

Depending on the installation, a compatible RCU6211 Remote Control Unit can be added.

This enables configurations with multiple control positions and can be particularly useful for tandem cockpits, training aircraft and specialized aircraft installations.

Wide Supply Voltage Range

The AR6213 operates with a supply voltage of 10.25 to 33 V DC.

It can therefore be installed in both typical 12/14 V and 24/28 V aircraft electrical systems.

For limited emergency operation, a voltage range of 9.0 to 10.25 V DC is specified.

Robust Design

The Becker Avionics 6200 Series was developed for professional aviation applications.

The radio requires no forced-air cooling and no additional cooling fan, eliminating additional moving components and potential noise sources.

Its robust design is intended to provide high reliability and long service life.

Features:

Professional VHF/AM aviation transceiver

Single-block transceiver with integrated control panel

160 mm / 6.25-inch avionics stack format

Becker Avionics 6200 Series

Design Assurance Level C (DAL C)

8.33 kHz and 25 kHz channel spacing

Frequency range: 118.000 – 136.990 MHz

Up to 2,280 channels with 8.33 kHz spacing

760 channels with 25 kHz spacing

6 W RF transmitter output

6 W version at both 14 V and 28 V

Modern DSP technology

Dual Watch / SCAN Mode

Simultaneous monitoring of a second frequency

Integrated VOX-controlled intercom

4-place intercom

Two separate intercom circuits

Separate PTT functions for pilot and co-pilot

AUX audio input

Integrated loudspeaker output

At least 4 W loudspeaker output into 4 ohms

Automatic storage of recently used frequencies

RF signal indication

Adjustable squelch threshold

Safe-Lock function to prevent accidental changes

Expandable with an additional control unit

Tandem operation possible

Wide supply voltage range

Suitable for 12/14 V and 24/28 V aircraft electrical systems

No forced-air cooling required

No cooling fan

ETSO/TSO certified

FCC approved

Technical Specifications:

Model: Becker Avionics AR6213

Version: 6 W

Device type: VHF/AM Aviation Transceiver

Configuration: Single Block / Stack Mount

Design Assurance Level: DAL C

Frequency range: 118.000 – 136.990 MHz

Channel spacing: 8.33 kHz / 25 kHz

Channels at 25 kHz: 760

Channels at 8.33 kHz: 2,280

RF transmitter output: ≥ 6 W into 50 ohms

RF transmitter output at 14 V: ≥ 6 W

RF transmitter output at 28 V: ≥ 6 W

Supply voltage: 10.25 – 33 V DC

Emergency operating voltage: 9.0 – 10.25 V DC

Current consumption, receive / standby at 12 V: ≤ 140 mA

Current consumption, transmit at 12 V: < 2 A

Dual Watch: Yes

Intercom: Integrated / VOX controlled

Intercom positions: Up to 4

Intercom circuits: 2

AUX audio input: Yes

Headphone output: ≥ 300 mW into 150 ohms / ≥ 100 mW into 600 ohms

Loudspeaker output: ≥ 4 W into 4 ohms

Squelch: Adjustable

Maximum operating altitude: 35,000 ft

Operating temperature: -20 °C to +55 °C

Short-time operating temperature: up to +70 °C

Storage temperature: -55 °C to +85 °C

Weight: approx. 800 g

Installation Format:

The AR6213 is designed as a 160 mm / 6.25-inch stack-mounted unit with an integrated control panel.

Unlike the AR6211 in the classic 58 mm / 2¼-inch round instrument format, the AR6213 is designed for installation in a horizontal avionics stack.

The single-block design combines the transceiver and control panel in one unit.

Approvals / Standards:

ETSO-C37e

ETSO-C38e

TSO-C169a

FCC approved

EASA Approval: EASA.21O.10075461

Design Assurance Level: DAL C

Dual Watch / SCAN Mode:

The integrated Dual Watch function allows a second frequency to be monitored while the active frequency remains available for communication.

This makes it possible, for example, to monitor the next required frequency before changing over from the currently active channel.

Integrated 4-Place Intercom:

The AR6213 features an integrated VOX-controlled 4-place intercom with two separate intercom circuits.

Separate PTT functions for pilot and co-pilot allow flexible integration into different cockpit and headset configurations.

6 W Version:

This product is the 6 W version of the Becker AR6213.

Transmitter output is at least 6 W at both 14 V and 28 V supply voltage.

For installations requiring higher transmitter output with a 28 V electrical system, the AR6213 is also available in a version providing at least 10 W at 28 V.

Installation:

The AR6213 is a complete single-block transceiver with an integrated control panel. Therefore, no separate Remote Control Unit is required for normal operation.

The wide 10.25 to 33 V DC supply voltage range allows installation in different aircraft electrical systems.

Installation must be carried out in accordance with the applicable airworthiness, regulatory and technical requirements for the respective aircraft.

Scope of Delivery:

Becker Avionics AR6213 VHF Aviation Transceiver, 6 W version

Connector kit, mounting frame, wiring harness and additional installation accessories according to the scope of delivery specified for the respective product.

The Becker Avionics AR6213, 6 W is a professional solution for pilots, aircraft owners and avionics specialists looking for a high-performance 8.33 kHz aviation transceiver in a conventional stack format with DAL C design assurance.

With 6 W transmitter output, Dual Watch, an integrated 4-place intercom, two separate intercom circuits, AUX audio input and a wide supply voltage range, the AR6213 provides comprehensive communication and audio functionality for demanding General Aviation and professional avionics installations.